Oh, I wasn't aware the H330 and HBA330 are different devices!
> There is a PERC H330 and a PERC HBA330 and the Dell PERC9 user manual
> (includes the H330) says you can boot it in HBA mode. Not sure if
> that means that you can chose the firmware.
Oh well. So the HBA330 is a PowerEdge RAID Controller that isn't a RAID
controller? Thanks, Dell marketing!
> -> This is attaching a H330 (RAID version) and it gets the mfii driver.
> mfii0 at pci1 dev 0 function 0: "PERC H330 Mini", firmware 25.5.9.0001
OK, remains the question why I don't see any discs in bioctl.
On startup, the machine utters the following:
PowerEdge Expandable RAID Controller BIOS
Copyright(c) 2016 Avago Technologies
Press <Ctrl><R> to Run Configuration Utility
HA -0 (Bus 1 Dev 0) PERC H330 Mini
FW package: 25.5.0.0001
0 Non-RAID Disk(s) found on the host adapter.
0 Non-RAID Disk(s) handled by BIOS
0 Virtual Disk(s) found on the host adapter.
0 Virtual Disk(s) handled by BIOS
Is this normal? The only place I see discs being recognized is in the BIOS
setup's controller setup.
