I am trying to use an old CF card reader. The reader itself works, my Linux laptop attaches it as:
usb 2-2: new high-speed USB device number 17 using xhci_hcd usb 2-2: New USB device found, idVendor=058f, idProduct=6362, bcdDevice= 1.00 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: Mass Storage Device usb 2-2: Manufacturer: Generic usb 2-2: SerialNumber: 058F312D81B1 usb-storage 2-2:1.0: USB Mass Storage device detected scsi host3: usb-storage 2-2:1.0 scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 3:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:1: Attached scsi generic sg3 type 0 sd 3:0:0:0: [sdc] Media removed, stopped polling sd 3:0:0:2: Attached scsi generic sg4 type 0 sd 3:0:0:3: Attached scsi generic sg5 type 0 sd 3:0:0:1: [sdd] Media removed, stopped polling sd 3:0:0:0: [sdc] Attached SCSI removable disk sd 3:0:0:2: [sde] Media removed, stopped polling sd 3:0:0:1: [sdd] Attached SCSI removable disk sd 3:0:0:3: [sdf] Media removed, stopped polling sd 3:0:0:3: [sdf] Attached SCSI removable disk sd 3:0:0:2: [sde] Attached SCSI removable disk But my intel mac mini with NetBSD 10.1 fails with: uhub1: port 1, set config at addr 18 failed uhub1: autoconfiguration error: device problem, disabling port 1 Other devices work in this port, e.g.: uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Mitsumi Electric (0x05ac) Apple Optical USB Mouse (0x0304), rev 1.10/1.10, addr 16, iclass 3/1 ... umass0 at uhub0 port 1 configuration 1 interface 0 umass0: JetFlash (0x8564) Mass Storage Device (0x1000), rev 3.00/11.00, addr 17 ... Any leads on how do I debug this? TIA. -uwe
