Note: forwarded message attached.

B.Surendiran, 
If u have time Visit
Website:
http://suri.tk/
http://www.suri.0catch.com/


                
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/67folB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/tech4all/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
--- Begin Message ---

Notes: Before buying a Hard Disk.

1. Check for RPM - higher the rpm , higher the data transfer rate.

ATA / SATA HDD - Go for 7,200 rpm . Don't go for 5,400 rpm.

SCSI = >10,000 rpm

2. Don't do low level partition frequently. U can do normal windows format. but a HDD can withstand max of 20 low level partitioning.

3. check for warranty.

4. Check for protective sheild at the bottom of the HDD.

5. Never use the HDD verticaly, unless it is specifically manufactured for using vertically. Hitachi HDD can be used vertically.

6. GB mentioned in HDD = 1000 MB, not 1024 MB.

7. If u r buying new HDD for old motherboard, check whether the max HDD capacity supported by ur motherboard BIOS. Even if doesn't higher capacity HDD, still u can use it with ur old motherboard. U need to use the jumber for the pins - that specifies "limit my HDD capacity".

Eg: ur motherboard supports only max HDD size of 80 GB, still u can use 120GB HDD with ur old motherboard - as per the above mentioned method. The will detect the 120GB as 80GB, but windows will show u all the 120GB.

8. Do u know , the life of HDD is 5 yrs for a frequent usage [ I had  forgot the hour usage per day ].

9. If u partition the HDD, say it is 20GB, if u calculate the total size from all the partitions ,it will come around only 18.5GB. where is the remaining 2 GB gone???

 As windows uses 1 GB = 1024 MB, and HDD manufactures ues 1 GB = 1000 MB, u will lose 480 MB in a 20 GB harddisk.

And, When u partition the harddisk, the ramining space of around 1 GB is taken for partition and File Allocation table.

That's y u will see only 18.5 GB out of 20GB Hard disk.

 

Regards,

Surendiran.B

 

"SASKEN RATED THE BEST COMPANY TO WORK FOR IN INDIA - SURVEY 2004 conducted by the BUSINESS TODAY -Mercer-TNS India"

SASKEN BUSINESS DISCLAIMER
This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email

--- End Message ---

Reply via email to