15.04.2018 22:07, Michael пишет:
As many of you may know I recently joined Phil and Stuart at Diamond Key.
I have been setting up my computer to have the capability to generate
builds of the various system components.
I installed arm-none-eabi-gcc from the xenial repository , it reports
version (15:4.9.3+svn231177-1) 4.9.3 20150529 (prerelease).
avr-gcc installed with version 4.9.2. Are these tool revs sufficient to
do builds for the Alpha?
I was able to install 14.7 of Xilinx ISE although the full tar link took
me to newer software. I was able to d/l the 4 part install files and get
it that way.
I am getting these messages from make when trying make firmware.
//make -C build/core/platform/alpha/build//
//make: Entering directory
//. /opt/Xilinx/14.7/ISE_DS/settings64.sh; xst -ifn alpha_fmc.scr//
///bin/sh: 12: [: /bin/sh: unexpected operator//
//. /opt/Xilinx/14.7/ISE_DS/EDK/.settings64.sh /opt/Xilinx/14.7/ISE_DS/EDK//
//. /opt/Xilinx/14.7/ISE_DS/ISE/.settings64.sh /opt/Xilinx/14.7/ISE_DS/ISE//
///bin/sh: 1: xst: not found//
//xilinx.mk:137: recipe for target 'alpha_fmc.ngc' failed//
//make: *** [alpha_fmc.ngc] Error 127//
//make: Leaving directory
//Makefile:92: recipe for target
//make: *** [build/core/platform/alpha/build/alpha_fmc.bit] Error 2
/I suspect this is a license issue, but please confirm.
Have you actually installed a license during the process? Xilinx offers
a free license ("WebPACK"), that allows you to build for certain
devices. As far as I remember, there's a link somewhere buried in
xilinx.com, that allows you generate it. Our FPGA is the largest one,
that is supported with a free license.
You problem doesn't look like a license issue to me, I think, the script
that sets environmental variables for the build tools fails for some reason.
Phil, I think this a commercial license. Is this something I need to get
in the short term.
Tech mailing list
With best regards,
Tech mailing list