Hey there,
From g...@gwk.ca Sun Jun 7 01:54:35 2009
This will call the ACPI _PDC method, normally this ins't
implemented on systems with amd processors but the acpi
spec says that we should try and evaulate it anyway. In
addition to the diff that was backed out prior to the 4.5
release it will also attempt to evaluate the OSC method on
each acpicpu instance.
If you have a machine with an intel cpu of reasonable vintage
you will see more states after you apply this.
I am not seeing any problems so far. Lenovo T500 Thinkpad on i386 MP.
Diff
==================
--- acpi_1_dmesg.out Wed Jun 10 00:48:53 2009
+++ acpi_1_dmesg.new Wed Jun 10 01:07:09 2009
@@ -1,9 +1,9 @@
-OpenBSD 4.5-current (GENERIC.MP) #5: Sun May 31 21:14:50 EDT 2009
+OpenBSD 4.5-current (GENERIC.MP) #6: Wed Jun 10 00:51:16 EDT 2009
r...@onyx.local:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2088005632 (1991MB)
-avail mem = 2010529792 (1917MB)
+avail mem = 2010689536 (1917MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/30/08, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "6FET50WW (1.20 )" date 10/30/2008
@@ -16,7 +16,7 @@
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
-cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.56 GHz
+cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
@@ -30,8 +30,9 @@
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
-acpicpu0 at acpi0: C3, C2
-acpicpu1 at acpi0: C3, C2
+acpicpu0 at acpi0: C3, C2, C1, PSS
+acpicpu1 at acpi0: C3, C2, C1, PSS
+acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
@@ -40,13 +41,9 @@
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
-acpidock at acpi0 not configured
-acpivideo at acpi0 not configured
-acpivideo at acpi0 not configured
+acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000
0xde000/0x1800! 0xe0000/0x10000
-cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617492506004925
-cpu0: using only highest and lowest power states
-cpu0: Enhanced SpeedStep 19467 MHz (1292 mV): speeds: 19467, 1600 MHz
+cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
Actual Dmesg:
=====================
OpenBSD 4.5-current (GENERIC.MP) #6: Wed Jun 10 00:51:16 EDT 2009
r...@onyx.local:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2088005632 (1991MB)
avail mem = 2010689536 (1917MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/30/08, BIOS32 rev. 0 @ 0xfdc80, SMBIOS
rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "6FET50WW (1.20 )" date 10/30/2008
bios0: LENOVO 2081CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4)
EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3)
EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4623" serial 4193 type LION oem "SONY"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000
0xde000/0x1800! 0xe0000/0x10000
cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 20
(irq 11), address 00:1c:25:9c:48:06
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 (irq
11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int
17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21 (irq
11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int 17
(irq 11), MIMO 3T3R, MoW, address 00:21:6a:0b:8a:be
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23 (irq
11)
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci4 at ppb3 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq
11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq
11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
(irq 11)
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
(irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 16
(irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS72201, DCDZ> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-U20N, HX12> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
(irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ugen1 at uhub7 port 2 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--
Aaron W. Hsu <arcf...@sacrideo.us> | <http://www.sacrideo.us>
"Government is the great fiction, through which everybody endeavors to
live at the expense of everybody else." -- Frederic Bastiat
+++++++++++++++ ((lambda (x) (x x)) (lambda (x) (x x))) ++++++++++++++
