(Mark wrote) > > This diff switches re(4) over to MCLGETI, bringing goodies like lower > memory usage and livelock mitigation. Getting this right usually > takes some effort. So please help me with getting this tested if you > have any machines with re(4). > > Thanks, > > Mark > > (patch snipped)
no apparent problems here, other than the watchdog timeout at the end of the dmesg OpenBSD 4.6-current (GENERIC) #3: Wed Jul 22 16:01:56 MDT 2009 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1072984064 (1023MB) avail mem = 1028718592 (981MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 06/15/06, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @ 0xf0500 (62 entries) bios0: vendor American Megatrends Inc. version "1006.002" date 06/15/2006 bios0: ASUSTeK Computer INC. P4S800D-X acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC OEMB acpi0: wakeup devices PS2K(S4) PS2M(S4) UAR1(S4) EUSB(S3) USB_(S3) USB2(S3) USB3(S3) AC97(S4) MC97(S4) MAC_(S4) PCI1(S4) PCI2(S4) PCI3(S4) PCI4(S4) PCI5(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 acpibtn0 at acpi0: PWRB bios0: ROM list: 0xc0000/0x9800 0xc9800/0x5000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "SiS 655 PCI" rev 0x50 sisagp0 at pchb0 agp0 at sisagp0: aperture at 0xe0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA Vanta" rev 0x15 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36 pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 655: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <ST3250620A> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1 at pciide0 channel 0 drive 1: <ST3200827A> wd1: 16-sector PIO, LBA48, 190782MB, 390721968 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H50L, 1.00> ATAPI 5/cdrom removable cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 1 int 18 (irq 5), SiS7012 AC97 ac97: codec id 0x41445368 (Analog Devices AD1888) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 20 (irq 5), version 1.0, legacy support ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 21 (irq 5), version 1.0, legacy support ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: apic 1 int 22 (irq 10), version 1.0, legacy support ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: apic 1 int 23 (irq 3) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1 sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: apic 1 int 19 (irq 5), address 00:18:f3:18:72:66 rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1 pciide1 at pci0 dev 5 function 0 "SiS 180 SATA" rev 0x01: DMA pciide1: using apic 1 int 17 (irq 10) for native-PCI interrupt re0 at pci0 dev 8 function 0 "Realtek 8169" rev 0x10: RTL8110S (0x0400), apic 1 int 16 (irq 11), address 00:14:6c:8e:b6:e6 rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 pciide2 at pci0 dev 10 function 0 "Promise PDC40718" rev 0x02: DMA wd2 at pciide2 channel 1 drive 0: <ST3500320AS> wd2: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd2(pciide2:1:0): using BIOS timings, Ultra-DMA mode 6 wd3 at pciide2 channel 3 drive 0: <ST3500320AS> wd3: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd3(pciide2:3:0): using BIOS timings, Ultra-DMA mode 6 pciide2: using apic 1 int 18 (irq 5) for native-PCI interrupt isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 wbsio0 at isa0 port 0x2e/2: W83627THF rev 0x84 lm1 at wbsio0 port 0x290/8: W83627THF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci2: USB revision 1.0 uhub3 at usb3 "SiS OHCI root hub" rev 1.00/1.00 addr 1 mtrr: Pentium Pro MTRR support umass0 at uhub0 port 6 configuration 1 interface 0 "Y-E DATA Silicon Media R/W" rev 2.00/4.08 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Y-E DATA, USB HS-CF Card, 4.08> SCSI0 0/direct removable sd0: drive offline sd1 at scsibus1 targ 1 lun 1: <Y-E DATA, USB HS-xD/SM, 4.08> SCSI0 0/direct removable sd1: drive offline sd2 at scsibus1 targ 1 lun 2: <Y-E DATA, USB HS-MS Card, 4.08> SCSI0 0/direct removable sd2: drive offline sd3 at scsibus1 targ 1 lun 3: <Y-E DATA, USB HS-SD Card, 4.08> SCSI0 0/direct removable sd3: drive offline wi0 at uhub3 port 1 "Microsoft\M-. Wireless USB Adapter MN-510" rev 1.10/1.32 addr 2 softraid0 at root root on wd0a swap on wd0b dump on wd0b wi0: PRISM2.5 USB (0x8010), Firmware 1.1.2 (primary), 1.5.1 (station), address 00:0d:3a:2a:b1:8a re0: watchdog timeout
