It looks like this NIC doesn't agree to 1000 full with the switch, other
cards do. Problem didn't however arise with this patch, it also shows
with booting obsd.
# ifconfig ale0
ale0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:23:54:96:6c:5c
priority: 0
groups: egress
media: Ethernet 1000baseT full-duplex (100baseTX full-duplex)
status: active
inet 192.168.168.4 netmask 0xffffffe0 broadcast 192.168.168.31
inet6 fe80::223:54ff:fe96:6c5c%ale0 prefixlen 64 scopeid 0x1
OpenBSD 4.6-current (EEE) #26: Sun Jul 26 11:14:44 CEST 2009
r...@eee:/usr/src/sys/arch/i386/compile/EEE
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class)
1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064529920 (1015MB)
avail mem = 1024507904 (977MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/25/09, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.5 @ 0xf0710 (30 entries)
bios0: vendor American Megatrends Inc. version "1902" date 03/25/2009
bios0: ASUSTeK Computer INC. 1000H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) HDAC(S4) P0P4(S4) P0P8(S4)
P0P5(S4) P0P7(S4) P0P9(S4) P0P6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P5)
acpiprt2 at acpi0: bus 1 (P0P7)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 85 degC
acpibat0 at acpi0: BAT0 model "1000H" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga0 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga0: apic 2 int 16 (irq 5)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 16 (irq 5)
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int
16 (irq 5)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int
17 (irq 10)
pci2 at ppb1 bus 3
ale0 at pci2 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: apic 2
int 17 (irq 10), address 00:23:54:96:6c:5c
atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int
19 (irq 11)
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int
19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int
18 (irq 7)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int
16 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9160310AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.05 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Single, Flash Reader, 1.00> SCSI0
0/direct removable
sd0: 3840MB, 512 bytes/sec, 7864320 sec total
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CNF7129" rev 2.00/15.44 addr 3
uvideo0: video control not supported for this device.
video0 at uvideo0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Brad schrieb:
On Sat, Jul 25, 2009 at 09:17:32AM -0400, Brad wrote:
If you have an Attansic L1E ale(4) adapter please test the following
diff to add flow control support.
Please provide a dmesg and "ifconfig aleX" output.
And now a rev of the diff that compiles properly..
Index: if_ale.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/if_ale.c,v
retrieving revision 1.4
diff -u -p -r1.4 if_ale.c
--- if_ale.c 29 Mar 2009 21:53:52 -0000 1.4
+++ if_ale.c 25 Jul 2009 23:24:50 -0000
@@ -372,7 +372,7 @@ ale_attach(struct device *parent, struct
const char *intrstr;
struct ifnet *ifp;
pcireg_t memtype;
- int error = 0;
+ int mii_flags, error = 0;
uint32_t rxf_len, txf_len;
/*
@@ -526,8 +526,11 @@ ale_attach(struct device *parent, struct
ifmedia_init(&sc->sc_miibus.mii_media, 0, ale_mediachange,
ale_mediastatus);
+ mii_flags = 0;
+ if ((sc->ale_flags & ALE_FLAG_JUMBO) != 0)
+ mii_flags |= MIIF_DOPAUSE;
mii_attach(self, &sc->sc_miibus, 0xffffffff, MII_PHY_ANY,
- MII_OFFSET_ANY, 0);
+ MII_OFFSET_ANY, mii_flags);
if (LIST_FIRST(&sc->sc_miibus.mii_phys) == NULL) {
printf("%s: no PHY found!\n", sc->sc_dev.dv_xname);
@@ -1153,12 +1156,10 @@ ale_mac_config(struct ale_softc *sc)
}
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
reg |= MAC_CFG_FULL_DUPLEX;
-#ifdef notyet
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0)
reg |= MAC_CFG_TX_FC;
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0)
reg |= MAC_CFG_RX_FC;
-#endif
}
CSR_WRITE_4(sc, ALE_MAC_CFG, reg);
}
