But is that an interrupt issue or does the disk simply suck?
On Thu, Jul 30, 2009 at 05:27:25PM +0200, frantisek holop wrote:
> hmm, on Thu, Jul 30, 2009 at 09:25:49AM -0500, Marco Peereboom said that
> > Performance ok/better with the fancy pci routing tables enabled?
>
> hard to say as the disk is pig slow. feels like the 486 times..
>
> > > pciide1 at pci0 dev 9 function 0 "NVIDIA MCP77 AHCI" rev 0xa2: DMA
> > > (unsupported), channel 0 wired to native-PCI, channel 1 wired to
> > > native-PCI
> > > pciide1: using apic 0 int 10 (irq 10) for native-PCI interrupt
> > > wd0 at pciide1 channel 0 drive 0: <FUJITSU MHZ2320BH G2>
> > > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
>
> -f
>
> > On Thu, Jul 30, 2009 at 03:52:05PM +0200, frantisek holop wrote:
> > > hmm, on Wed, Jul 29, 2009 at 08:50:14PM -0500, Marco Peereboom said that
> > > > did you try disabling acpicpu only?
> > >
> > > i have tried this and here is the dmesg:
> > > (it is also accessible under obiit.org/f/dmesg.bsd.sp.acpi)
> > >
> > > OpenBSD 4.6-current (GENERIC) #85: Mon Jul 27 19:10:16 MDT 2009
> > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > > cpu0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 ("AuthenticAMD"
> > > 686-class, 1024KB L2 cache) 2.11 GHz
> > > cpu0:
> > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
> > > real mem = 3217108992 (3068MB)
> > > avail mem = 3116666880 (2972MB)
> > > User Kernel Config
> > > UKC> disable acpicpu
> > > 471 acpicpu* disabled
> > > UKC> quit
> > > Continuing...
> > > mainbus0 at root
> > > bios0 at mainbus0: AT/286+ BIOS, date 02/08/08, SMBIOS rev. 2.4 @
> > > 0xbfb51018 (53 entries)
> > > bios0: vendor American Megatrends Inc. version "E1652NMS VER.106" date
> > > 12/26/2008
> > > bios0: Micro-Star International GX-630
> > > acpi0 at bios0: rev 2
> > > acpi0: tables DSDT FACP APIC SSDT MCFG SLIC
> > > acpi0: wakeup devices PS2K(S4) PS2M(S4) NSMB(S4) USB0(S4) USB2(S3)
> > > USB1(S4) USB4(S3) NMAC(S5) HDAC(S4) POP2(S4) BR12(S4) BR13(S4) BR14(S4)
> > > BR16(S4) SLPB(S4) PWRB(S4)
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: apic clock running at 200MHz
> > > cpu at mainbus0: not configured
> > > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus 3 (BR12)
> > > acpiprt2 at acpi0: bus 4 (BR13)
> > > acpiprt3 at acpi0: bus 5 (BR14)
> > > acpiprt4 at acpi0: bus 8 (BR16)
> > > acpiec0 at acpi0
> > > acpicpu at acpi0 not configured
> > > acpitz0 at acpi0: critical temperature 100 degC
> > > acpiac0 at acpi0: AC unit online
> > > acpibat0 at acpi0: BAT1 model "MS-1221
> > > " serial
> > > type LION
> > > oem "MSI Corp.
> > > "
> > > acpibtn0 at acpi0: LID0
> > > acpibtn1 at acpi0: SLPB
> > > acpibtn2 at acpi0: PWRB
> > > acpivideo0 at acpi0: VGA_
> > > acpivout0 at acpivideo0: CRT_
> > > acpivout1 at acpivideo0: LCD_
> > > acpivout2 at acpivideo0: HDMI
> > > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1800
> > > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > > "NVIDIA MCP77 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured
> > > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP77 ISA" rev 0xa2
> > > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP77 SMBus" rev 0xa1
> > > iic0 at nviic0
> > > iic1 at nviic0
> > > spdmem0 at iic1 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> > > spdmem1 at iic1 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> > > "NVIDIA MCP77 Co-processor" rev 0xa2 at pci0 dev 1 function 3 not
> > > configured
> > > "NVIDIA MCP77 Memory" rev 0xa1 at pci0 dev 1 function 4 not configured
> > > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP77 USB" rev 0xa1: apic 0 int 7
> > > (irq 7), version 1.0, legacy support
> > > ehci0 at pci0 dev 2 function 1 "NVIDIA MCP77 USB" rev 0xa1: apic 0 int 11
> > > (irq 11)
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
> > > ohci1 at pci0 dev 4 function 0 "NVIDIA MCP77 USB" rev 0xa1: apic 0 int 5
> > > (irq 5), version 1.0, legacy support
> > > ehci1 at pci0 dev 4 function 1 "NVIDIA MCP77 USB" rev 0xa1: apic 0 int 7
> > > (irq 7)
> > > usb1 at ehci1: USB revision 2.0
> > > uhub1 at usb1 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
> > > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP77 IDE" rev 0xa1: DMA,
> > > channel 0 configured to compatibility, channel 1 configured to
> > > compatibility
> > > pciide0: channel 0 ignored (disabled)
> > > pciide0: channel 1 ignored (disabled)
> > > azalia0 at pci0 dev 7 function 0 "NVIDIA MCP77 HD Audio" rev 0xa1: apic 0
> > > int 11 (irq 11)
> > > azalia0: codecs: Realtek ALC888, Motorola/0x3055, NVIDIA/0x0006, using
> > > Realtek ALC888
> > > audio0 at azalia0
> > > ppb0 at pci0 dev 8 function 0 "NVIDIA MCP77 PCI" rev 0xa1
> > > pci1 at ppb0 bus 1
> > > pciide1 at pci0 dev 9 function 0 "NVIDIA MCP77 AHCI" rev 0xa2: DMA
> > > (unsupported), channel 0 wired to native-PCI, channel 1 wired to
> > > native-PCI
> > > pciide1: using apic 0 int 10 (irq 10) for native-PCI interrupt
> > > wd0 at pciide1 channel 0 drive 0: <FUJITSU MHZ2320BH G2>
> > > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> > > atapiscsi0 at pciide1 channel 0 drive 1
> > > scsibus0 at atapiscsi0: 2 targets
> > > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7560S, SX01> ATAPI
> > > 5/cdrom removable
> > > pciide1: channel 1 ignored (not responding; disabled or no drives?)
> > > nfe0 at pci0 dev 10 function 0 "NVIDIA MCP77 LAN" rev 0xa2: apic 0 int 5
> > > (irq 5), address 00:21:85:55:af:d3
> > > eephy0 at nfe0 phy 1: 88E1116 Gigabit PHY, rev. 1
> > > ppb1 at pci0 dev 16 function 0 "NVIDIA MCP77 PCIE" rev 0xa1: apic 0 int 7
> > > (irq 7)
> > > pci2 at ppb1 bus 2
> > > vga1 at pci2 dev 0 function 0 vendor "NVIDIA", unknown product 0x0649 rev
> > > 0xa1
> > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > ppb2 at pci0 dev 18 function 0 "NVIDIA MCP77 PCIE" rev 0xa1: apic 0 int
> > > 11 (irq 11)
> > > pci3 at ppb2 bus 3
> > > ral0 at pci3 dev 0 function 0 "Ralink RT2790" rev 0x00: apic 0 int 11
> > > (irq 11), address 00:21:85:b3:c4:ec
> > > ral0: MAC/BBP RT2872 (rev 0x0200), RF RT2720 (MIMO 1T2R)
> > > ppb3 at pci0 dev 19 function 0 "NVIDIA MCP77 PCI" rev 0xa1: apic 0 int 5
> > > (irq 5)
> > > pci4 at ppb3 bus 4
> > > ppb4 at pci0 dev 20 function 0 "NVIDIA MCP77 PCI" rev 0xa1: apic 0 int 7
> > > (irq 7)
> > > pci5 at ppb4 bus 5
> > > ppb5 at pci0 dev 22 function 0 "NVIDIA MCP77 PCI" rev 0xa1: apic 0 int 11
> > > (irq 11)
> > > pci6 at ppb5 bus 8
> > > "JMicron FireWire" rev 0x00 at pci6 dev 0 function 0 not configured
> > > "JMicron SD/MMC" rev 0x00 at pci6 dev 0 function 1 not configured
> > > sdhc0 at pci6 dev 0 function 2 "JMicron SD Host Controller" rev 0x00:
> > > apic 0 int 11 (irq 11)
> > > sdmmc0 at sdhc0
> > > "JMicron Memory Stick" rev 0x00 at pci6 dev 0 function 3 not configured
> > > "JMicron xD" rev 0x00 at pci6 dev 0 function 4 not configured
> > > pchb0 at pci0 dev 24 function 0 "AMD AMD64 11h HyperTransport" rev 0x40
> > > pchb1 at pci0 dev 24 function 1 "AMD AMD64 11h Address Map" rev 0x00
> > > pchb2 at pci0 dev 24 function 2 "AMD AMD64 11h DRAM Cfg" rev 0x00
> > > km0 at pci0 dev 24 function 3 "AMD AMD64 11h Misc Cfg" rev 0x00
> > > pchb3 at pci0 dev 24 function 4 "AMD AMD64 11h Link Cfg" rev 0x00
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5
> > > pckbd0 at pckbc0 (kbd slot)
> > > pckbc0: using irq 1 for kbd slot
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pmsi0 at pckbc0 (aux slot)
> > > pckbc0: using irq 12 for aux slot
> > > wsmouse0 at pmsi0 mux 0
> > > pcppi0 at isa0 port 0x61
> > > midi0 at pcppi0: <PC speaker>
> > > spkr0 at pcppi0
> > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > > usb2 at ohci0: USB revision 1.0
> > > uhub2 at usb2 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
> > > usb3 at ohci1: USB revision 1.0
> > > uhub3 at usb3 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
> > > mtrr: Pentium Pro MTRR support
> > > umass0 at uhub1 port 1 configuration 1 interface 0 "USB 2.0 USB Flash
> > > Drive" rev 2.00/1.00 addr 2
> > > umass0: using SCSI over Bulk-Only
> > > scsibus1 at umass0: 2 targets, initiator 0
> > > sd0 at scsibus1 targ 1 lun 0: <USB 2.0, USB Flash Drive, 0.00> SCSI2
> > > 0/direct removable
> > > sd0: 15424MB, 512 bytes/sec, 31588352 sec total
> > > uhidev0 at uhub2 port 2 configuration 1 interface 0 "Areson Gaming II"
> > > rev 2.00/10.00 addr 2
> > > uhidev0: iclass 3/1
> > > ums0 at uhidev0: 5 buttons, Z dir
> > > wsmouse1 at ums0 mux 0
> > > uhidev1 at uhub2 port 2 configuration 1 interface 1 "Areson Gaming II"
> > > rev 2.00/10.00 addr 2
> > > uhidev1: iclass 3/0, 4 report ids
> > > ums1 at uhidev1 reportid 1: 5 buttons, Z dir
> > > wsmouse2 at ums1 mux 0
> > > uhid0 at uhidev1 reportid 2: input=7, output=7, feature=0
> > > ukbd0 at uhidev1 reportid 3
> > > ukbd0: attach failed, too many key codes
> > > uhid1 at uhidev1 reportid 4: input=2, output=0, feature=0
> > > softraid0 at root
> > > root on wd0a swap on wd0b dump on wd0b
> > > --
> > > i was born at a very early age...
>
> --
> atheism is a non-prophet organization.
