this is fresh install of 4.5 on IBM ThinkPad T30.
While extracting ports.tar.gz/src.tar.gz system panic
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel"
686-class) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 535851008 (511MB)
avail mem = 509845504 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/16/06, BIOS32 rev. 0 @ 0xfd7e0,
SMBIOS rev. 2.31 @ 0xe0010 (49 entries)
bios0: vendor IBM version "1IET71WW (2.10 )" date 06/16/2006
bios0: IBM 236786G
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S4) PCI1(S4)
DOCK(S4) USB0(S3) USB1(S3) USB2(S3) AC97(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, FVS, 2000, 1200 MHz
acpitz0 at acpi0: critical temperature 92 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "TI PCI1520 CardBus" rev 0x01: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI1520 CardBus" rev 0x01: irq 11
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq
11, address 00:15:00:3e:11:f1
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq
11, address 00:09:6b:cd:a8:54
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1200BEVE-00UYT0>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8081N, 0012> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq
11, ICH3 AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ed6d netmask ed6d ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
# tar xzf src.tar.gz -C src
free vnode: 0xd58ec384, type VREG, use 8192, write 0, hold 0, flags
(VBIOONFREELIST)
tag VT_UFS, ino 1875000, on dev 0, 5 flags 0x0, effnlink 1, nlink 1
mode 0100644, owner 0, group 1000, size 17 not locked
panic: free vnode isn't
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
1816 2886 2886 0 3 0x4082 pipewr gzip
* 2886 17894 2886 0 7 0x4002 tar
17894 1 17894 0 3 0x4082 pause ksh
22062 1 22062 0 3 0x4082 ttyin getty
24899 1 24899 0 3 0x4082 ttyin getty
21469 1 21469 0 3 0x4082 ttyin getty
11763 1 11763 0 3 0x4082 ttyin getty
10256 1 10256 0 3 0x4082 ttyin ksh
27235 1 27235 0 3 0x80 select cron
8948 1 8948 0 3 0x40180 select sendmail
9618 1 9618 0 3 0x80 select sshd
22231 1 22231 0 3 0x180 select inetd
6101 14785 14785 73 2 0x180 syslogd
14785 1 14785 0 3 0x88 netio syslogd
23835 1 23835 77 3 0x180 poll dhclient
20937 1 4265 0 3 0x82 poll dhclient
16 0 0 0 3 0x100200 bored crypto
15 0 0 0 3 0x100200 aiodoned aiodoned
14 0 0 0 3 0x100200 syncer update
13 0 0 0 3 0x100200 cleaner cleaner
12 0 0 0 3 0x100200 reaper reaper
11 0 0 0 3 0x100200 pgdaemon pagedaemon
10 0 0 0 3 0x100200 pftm pfpurge
9 0 0 0 3 0x100200 usbevt usb2
8 0 0 0 3 0x100200 usbevt usb1
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbevt usb0
5 0 0 0 3 0x100200 acpi_idle acpi0
4 0 0 0 3 0x100200 bored syswq
3 0 0 0 3 0x100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x4080 wait init
0 -1 0 0 3 0x80200 scheduler swapper
ddb> trace
Debugger(0,d6278000,d954abc0,d58ec384,0) at Debugger+0x4
panic(d06f532d,d58ec384,90255,0,85) at panic+0x55
getnewvnode(1,d13dd000,d130e700,d954abfc) at getnewvnode+0x1d3
ffs_vget(d13dd000,1cf2ae,d954ac84,1cf2ae) at ffs_vget+0x4c
ffs_inode_alloc(d58a595c,41ed,d5a961e0,d954ac84) at ffs_inode_alloc+0xcc
ufs_mkdir(d954adf8,d5a95e10,d59e5578,d0387031,d07a9590) at ufs_mkdir+0xa6
VOP_MKDIR(d58d213c,d954ae58,d954ae6c,d954ae98,d954ae98,0,0,d5a73128) at
VOP_MKD
IR+0x34
sys_mkdir(d59e5578,d954af68,d954af58,3c0027cb,d59e5578) at sys_mkdir+0xa5
syscall() at syscall+0x24e
--- syscall (number 136) ---
0x1c00e58d:
ddb>
