Hi, Using the 09/09 snap, my vorbis player which connects via USB has started doing this and either hanging at mount, or when copying to it:
umass0 at uhub0 port 2 configuration 1 interface 0 "COWON Systems, Inc. iAUDIO 7" rev 2.00/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 sd2 at scsibus4 targ 1 lun 0: <COWON, iAUDIO 7, 0100> SCSI0 0/direct removable sd2: 15776MB, 512 bytes/sec, 32309248 sec total uhub0: illegal enable change, port 2 splassert: usb_transfer_complete: want 1 have 5 umass0: Invalid CSW: tag 231 should be 232 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 This used to work. dmesg attached inline. Thanks -- Best Regards Edd Barrett (Freelance software developer / technical writer / open-source developer) http://students.dec.bmth.ac.uk/ebarrett console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.6-current (GENERIC) #114: Tue Sep 8 23:13:13 MDT 2009 [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1027817472 (980MB) mainbus0 at root: SUNW,Sun-Blade-1000 (UltraSPARC-III) cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.14) @ 900 MHz cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external (512 b/l) "memory-controller" at mainbus0 not configured schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 0 schizo0: dvma map c0000000-ffffffff pci0 at schizo0 ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01 "flashprom" at ebus0 addr 0-1fffff not configured pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23 iic0 at pcfiic0 bbc0 at ebus0 addr 0-fffff: AID 0x00 ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607 pcfiic1 at ebus0 addr 30-31 ivec 0x23 iic1 at pcfiic1 admtemp0 at iic1 addr 0x18: max1617 tda0 at iic1 addr 0x24 "scm001" at iic1 addr 0x20 not configured "firei" at iic1 addr 0x30 not configured beep0 at ebus0 addr 32-37: clock 75MHz audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x20 ivec 0x21: nvaddrs 0 audio0 at audioce0 rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287 "gpio" at ebus0 addr 300600-300607 not configured pmc0 at ebus0 addr 300700-300701 lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ivec 0x1c: polled sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d, address 00:03:ba:10:0e:6a luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1 "Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version 1.0, legacy support siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec 0x218, using 4K of on-board RAM scsibus0 at siop0: 16 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> SCSI2 5/cdrom removable siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec 0x219, using 4K of on-board RAM scsibus1 at siop1: 16 targets, initiator 7 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0 schizo1: dvma map c0000000-ffffffff pci1 at schizo1 isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204 isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 scsibus2 at isp0: 512 targets, WWPN 21000003ba100e6a, WWNN 21000003ba100e6a sd0 at scsibus2 targ 0 lun 0: <SEAGATE, ST3146707FC, 0003> SCSI3 0/direct fixed sd0: 140014MB, 512 bytes/sec, 286749488 sec total sd1 at scsibus2 targ 1 lun 0: <SEAGATE, ST3146807FC, 0006> SCSI3 0/direct fixed sd1: 140014MB, 512 bytes/sec, 286749488 sec total upa0 at mainbus0 creator0 at upa0: Elite3D, model SUNW,540-3623, dac 0 wsdisplay0 at creator0 mux 1: console (std, sun emulation) "ppm" at mainbus0 not configured splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 uhidev0 at uhub0 port 3 configuration 1 interface 0 "Sun Microsystems Type 6 Keyboard" rev 1.00/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 32 wskbd0 at ukbd0: console keyboard, using wsdisplay0 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 uhidev1 at uhub0 port 4 configuration 1 interface 0 "Logitech USB Mouse" rev 1.10/4.10 addr 3 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root bootpath: /p...@8,600000/SUNW,q...@4,0/f...@0,0/d...@21000014c303de67,0 root on sd0a swap on sd0b dump on sd0b splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 umass0 at uhub0 port 2 configuration 1 interface 0 "COWON Systems, Inc. iAUDIO 7" rev 2.00/1.00 addr 4 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 sd2 at scsibus4 targ 1 lun 0: <COWON, iAUDIO 7, 0100> SCSI0 0/direct removable sd2: 15776MB, 512 bytes/sec, 32309248 sec total uhub0: illegal enable change, port 2 splassert: usb_transfer_complete: want 1 have 5 umass0: Invalid CSW: tag 231 should be 232 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5 splassert: usb_transfer_complete: want 1 have 5
