On Sat, 10 Oct 2009 15:28:33 +0000
Jacob Meuser <[email protected]> wrote:
>
> please test with any and all USB audio devices.
>
Works for me.
OpenBSD 4.6-current (GENERIC.MP) #31: Sat Oct 10 18:41:10 CEST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
[...]
After the patch, I can also record from the device.
Before:
uaudio1 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech USB
Headset" rev 1.10/10.13 addr 2
uaudio1: ignored input endpoint of type adaptive
uaudio1: audio rev 1.00, 6 mixer controls
audio2 at uaudio1
After:
uaudio1 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech USB
Headset" rev 1.10/10.13 addr 2
uaudio1: audio rev 1.00, 6 mixer controls
audio2 at uaudio1
$ audioctl
name=USB audio
version=
config=uaudio
encodings=ulinear:8*,mulaw:8*,alaw:8*,slinear:8*,slinear_le:16,ulinear_le:16*,slinear_be:16*,ulinear_be:16*
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=400
hiwat=163
lowat=122
output_muted=0
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=127
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
play.block_size=400
play.errors=0
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.block_size=400
record.errors=0
$ mixerctl -v
outputs.spkr.mute=off [ off on ]
outputs.spkr=121,121 volume
record.mic.mute=off [ off on ]
record.mic=255 volume
inputs.mic.mute=on [ off on ]
inputs.mic=0 volume
$ dmesg
OpenBSD 4.6-current (GENERIC.MP) #32: Sat Oct 10 21:24:34 CEST 2009
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3152609280 (3006MB)
avail mem = 3066208256 (2924MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06b0 (76 entries)
bios0: vendor American Megatrends Inc. version "1704" date 11/27/2007
bios0: ASUSTeK Computer INC. P5B-E
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) EUSB(S4)
USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz, 2562.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 269MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz, 2156.39 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 4 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus -1 (P0P6)
acpiprt6 at acpi0: bus 3 (P0P7)
acpiprt7 at acpi0: bus 2 (P0P8)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
aibs at acpi0 not configured
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G965 PCIE" rev 0x02: apic 2 int 16 (irq
11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 7600 GT" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17 (irq
5)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq
15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int
22 (irq 3)
azalia0: codecs: Analog Devices AD1988A
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq
11)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2 int 19 (irq
10)
pci3 at ppb2 bus 3
age0 at pci3 dev 0 function 0 "Attansic Technology L1" rev 0xb0: apic 2 int 19
(irq 10), address 00:18:f3:9d:7d:04
atphy0 at age0 phy 0: F1 10/100/1000 PHY, rev. 5
ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq
11)
pci4 at ppb3 bus 2
jmb0 at pci4 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PLEXTOR, DVDR PX-740A, 1.00> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq
7)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq
10)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq
15)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq
7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci5 at ppb4 bus 5
puc0 at pci5 dev 1 function 0 "NetMos Nm9835" rev 0x01: ports: 1 com
com2 at puc0 port 0 apic 2 int 22 (irq 3): ns16550a, 16 byte fifo
re0 at pci5 dev 2 function 0 "D-Link Systems DGE-528T" rev 0x10: RTL8169/8110SB
(0x1000), apic 2 int 23 (irq 7), address 00:21:91:12:15:03
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
pcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD321KJ>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 (irq 10) for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 5 configuration 1 interface 0 "Logitech QuickCam E 3500
Plus" rev 2.00/0.06 addr 2
video0 at uvideo0
uaudio0 at uhub1 port 5 configuration 1 interface 2 "Logitech QuickCam E 3500
Plus" rev 2.00/0.06 addr 2
uaudio0: audio rev 1.00, 2 mixer controls
audio1 at uaudio0
uhidev0 at uhub5 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/27.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
uaudio1 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech USB
Headset" rev 1.10/10.13 addr 2
uaudio1: audio rev 1.00, 6 mixer controls
audio2 at uaudio1
Recording from my WebCam also works.
Thanks.
