Hello,
Two keys on my laptop give unknown acpi event messages on the console.
acpiasus0: unknown event 0x37
acpiasus0: unknown event 0x39
The 0x37 event is to deactivate and reactivate the touchpad.
the 0x39 is to switch between power mode
The laptop is an Asus Eeepc 1005ha-h
And here is the dmesg
OpenBSD 4.6-current (GENERIC.MP) #212: Wed Sep 30 13:28:30 MDT 2009
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
real mem = 1064529920 (1015MB)
avail mem = 1023004672 (975MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/24/09, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.5 @ 0xf0720 (30 entries)
bios0: vendor American Megatrends Inc. version "0703" date 07/24/2009
bios0: ASUSTeK Computer INC. 1005HA
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) HDAC(S4) P0P4(S4) P0P8(S4)
P0P5(S4) P0P7(S4) P0P9(S4) P0P6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P5)
acpiprt2 at acpi0: bus 1 (P0P7)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 88 degC
acpibat0 at acpi0: BAT0 model "1005HA" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit offline
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1667 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 15)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int 22 (irq 7)
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2
int 16 (irq 15)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2
int 17 (irq 10)
pci2 at ppb1 bus 2
"Atheros AR9285" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2
int 19 (irq 11)
pci3 at ppb2 bus 1
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: apic
2 int 19 (irq 11), address 00:26:18:50:28:6b
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 3)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2
int 18 (irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2
int 16 (irq 15)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2
int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 2
int 18 (irq 5), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54321, FB2O> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic
Technology Co., Ltd. USB2.0 UVC 1.3M WebCam" rev 2.00/26.01 addr 2
video0 at uvideo0
umass0 at uhub0 port 3 configuration 1 interface 0 "Generic Mass
Storage Device" rev 2.00/1.05 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Single, Flash Reader, 1.00> SCSI0
0/direct removable
sd1: 3904MB, 512 bytes/sec, 7995392 sec total
ubt0 at uhub4 port 1 "Broadcom Corp BT-253" rev 2.00/2.41 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
scsibus3 at softraid0: 1 targets
sd2 at scsibus3 targ 0 lun 0: <OPENBSD, SR CRYPTO, 003> SCSI2 0/direct fixed
sd2: 126795MB, 512 bytes/sec, 259677451 sec total
acpiasus0: unknown event 0x37
acpiasus0: unknown event 0x37
acpiasus0: unknown event 0x39
acpiasus0: unknown event 0x39
--
Vincent Auclair - auclair.vincent[ at ]gmail.com
(+33) 6 80 77 59 67
