On Tue, Jan 12, 2010 at 10:11:05AM +0100, Mark Kettenis wrote:
> Below is a somewhat important pci diff. Please test this on machines
> that have phrases likes:
>
> mem address conflict
> io address conflict
> bridge io address conflict
> bridge mem address conflict
>
> Check whether the hardware still functions, including CardBus or
> ExpressCard if you have it.
>
> In particular, this will fix the IBM eServer x336.
Sorry for beeing late...
With this (already committed) diff, my development machine is really
unhappy (more mem address conflicts and bridge mem address conflicts),
and the X server doesn't start up correctly.
Below are
- dmesg diff between a current kernel and a kernel with rev. 1.72
of pci.c reverted
- full dmesg. of the current kernel (with rev. 1.72 of pci.c)
- diff between Xorg.log of the not working and the working versions
Ciao,
Kili
--- dmesg.kaput Fri Jan 15 19:58:33 2010
+++ dmesg.working Fri Jan 15 20:09:12 2010
@@ -1,4 +1,4 @@
-OpenBSD 4.6-current (GENERIC.MP) #89: Fri Jan 15 19:54:31 CET 2010
+OpenBSD 4.6-current (GENERIC.MP) #90: Fri Jan 15 20:04:06 CET 2010
[email protected]:/var/compile/GENERIC.MP
real mem = 1875771392 (1788MB)
avail mem = 1815982080 (1731MB)
@@ -13,26 +13,26 @@
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
-cpu0: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.70 MHz
+cpu0: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.67 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
-cpu1: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.35 MHz
+cpu1: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.34 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
-cpu2: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.34 MHz
+cpu2: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.35 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
-cpu3: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.34 MHz
+cpu3: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.35 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
@@ -59,36 +59,17 @@
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
mem address conflict 0xe0000000/0x20000000
-bridge mem address conflict 0xfde00000/0x200000
-bridge mem address conflict 0xfdd00000/0x100000
-bridge mem address conflict 0xfda00000/0x100000
-mem address conflict 0xfe02f000/0x400
-mem address conflict 0xfe02e000/0x1000
-mem address conflict 0xfe02d000/0x1000
-mem address conflict 0xfe02c000/0x100
-mem address conflict 0xfe02b000/0x1000
-mem address conflict 0xfe02a000/0x1000
-mem address conflict 0xfe029000/0x100
-mem address conflict 0xfe024000/0x4000
-bridge mem address conflict 0xfdc00000/0x100000
-bridge mem address conflict 0xfdb00000/0x100000
-mem address conflict 0xfe028000/0x1000
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
-mem address conflict 0xfdfe0000/0x10000
-mem address conflict 0xfde00000/0x100000
-mem address conflict 0xfdffc000/0x4000
vga1 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: apic 2 int 19
(irq 3)
-azalia0: reset failure
+azalia0: no supported codecs
azalia0: initialization failure, detaching
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq
10)
pci2 at ppb1 bus 2
-mem address conflict 0xfdaff000/0x1000
-mem address conflict 0xfdae0000/0x10000
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00),
apic 2 int 18 (irq 10), address 00:1f:d0:93:e9:02
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22 (irq
11), AHCI 1.1
@@ -117,8 +98,6 @@
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
-mem address conflict 0xfdcff000/0x800
-mem address conflict 0xfdcf8000/0x4000
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq
10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
OpenBSD 4.6-current (GENERIC.MP) #89: Fri Jan 15 19:54:31 CET 2010
[email protected]:/var/compile/GENERIC.MP
real mem = 1875771392 (1788MB)
avail mem = 1815982080 (1731MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (57 entries)
bios0: vendor Award Software International, Inc. version "F1" date 06/03/2008
bios0: Gigabyte Technology Co., Ltd. GA-MA78GPM-DS2H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) PS2M(S5) PS2K(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.70 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.35 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.34 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) 9850 Quad-Core Processor, 2505.34 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE9)
acpiprt9 at acpi0: bus 2 (PCEA)
acpiprt10 at acpi0: bus -1 (PCEB)
acpiprt11 at acpi0: bus -1 (PCEC)
acpiprt12 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
mem address conflict 0xe0000000/0x20000000
bridge mem address conflict 0xfde00000/0x200000
bridge mem address conflict 0xfdd00000/0x100000
bridge mem address conflict 0xfda00000/0x100000
mem address conflict 0xfe02f000/0x400
mem address conflict 0xfe02e000/0x1000
mem address conflict 0xfe02d000/0x1000
mem address conflict 0xfe02c000/0x100
mem address conflict 0xfe02b000/0x1000
mem address conflict 0xfe02a000/0x1000
mem address conflict 0xfe029000/0x100
mem address conflict 0xfe024000/0x4000
bridge mem address conflict 0xfdc00000/0x100000
bridge mem address conflict 0xfdb00000/0x100000
mem address conflict 0xfe028000/0x1000
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
mem address conflict 0xfdfe0000/0x10000
mem address conflict 0xfde00000/0x100000
mem address conflict 0xfdffc000/0x4000
vga1 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: apic 2 int 19
(irq 3)
azalia0: reset failure
azalia0: initialization failure, detaching
ppb1 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 2 int 18 (irq 10)
pci2 at ppb1 bus 2
mem address conflict 0xfdaff000/0x1000
mem address conflict 0xfdae0000/0x10000
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00),
apic 2 int 18 (irq 10), address 00:1f:d0:93:e9:02
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22 (irq
11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG HD252HJ, 1AC0> SCSI3 0/direct fixed
sd0: 238474MB, 512 bytes/sec, 488395055 sec total
cd0 at scsibus0 targ 2 lun 0: <TSSTcorp, CDDVDW SH-S223F, SB00> ATAPI 5/cdrom
removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq
5), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16 (irq
5), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq
10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq
10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 (irq 3)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
(irq 5)
azalia1: codecs: Realtek ALC885
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
mem address conflict 0xfdcff000/0x800
mem address conflict 0xfdcf8000/0x4000
"TI TSB43AB23 FireWire" rev 0x00 at pci3 dev 14 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18 (irq
10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0x228
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Verbatim Desktop USB Drive"
rev 2.00/1.12 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SAMSUNG, HD103SI, > SCSI2 0/direct fixed
sd1: 953869MB, 512 bytes/sec, 1953525168 sec total
uhub7 at uhub2 port 3 "Chicony Generic USB Hub" rev 1.10/1.00 addr 2
udsbr0 at uhub3 port 1 "GemTek Corp USB FM Radio" rev 1.00/4.10 addr 2
radio0 at udsbr0
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Chicony PFU-65 USB
Keyboard" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Logitech Trackball" rev
1.10/2.20 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub5: device problem, disabling port 1
uhub5: device problem, disabling port 1
uhub5: port error, restarting port 1
uhub5: device problem, disabling port 1
uhub5: port error, restarting port 1
uhub5: device problem, disabling port 1
uhub5: port error, restarting port 1
uhub5: device problem, disabling port 1
uhub5: port error, restarting port 1
uhub5: device problem, disabling port 1
uhub5: port error, restarting port 1
uhub5: port error, giving up port 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
--- Xorg.0.log.kaput Fri Jan 15 19:58:46 2010
+++ Xorg.0.log.working Fri Jan 15 20:07:03 2010
@@ -5,7 +5,7 @@
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.6 amd64
-Current Operating System: OpenBSD nutty.outback.escape.de 4.6 GENERIC.MP#89
amd64
+Current Operating System: OpenBSD nutty.outback.escape.de 4.6 GENERIC.MP#90
amd64
Build Date: 14 January 2010 12:02:58AM
Before reporting problems, check http://wiki.x.org
@@ -13,7 +13,7 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 15 19:57:23 2010
+(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 15 20:06:32 2010
(II) Loader magic: 0xf40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
@@ -413,7 +413,7 @@
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
-(II) RADEON(0): Detected total video RAM=4194303K, accessible=262144K (PCI
BAR=262144K)
+(II) RADEON(0): Detected total video RAM=393216K, accessible=262144K (PCI
BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
@@ -426,7 +426,7 @@
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000,
min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk:
400.000000
-(II) RADEON(0): PLL parameters: rf=1432 rd=1023 min=64800 max=120000;
xclk=40000
+(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
@@ -448,18 +448,123 @@
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at
address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
-(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
+(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
+(II) RADEON(0): EDID data from the display on output: DVI-0
----------------------
+(II) RADEON(0): Manufacturer: ACI Model: 22a0 Serial#: 16843009
+(II) RADEON(0): Year: 2009 Week: 28
+(II) RADEON(0): EDID Version: 1.3
+(II) RADEON(0): Digital Display Input
+(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
+(II) RADEON(0): Gamma: 2.20
+(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
+(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
+(II) RADEON(0): Default color space is primary color space
+(II) RADEON(0): First detailed timing is preferred mode
+(II) RADEON(0): redX: 0.650 redY: 0.333 greenX: 0.281 greenY: 0.604
+(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
+(II) RADEON(0): Supported established timings:
+(II) RADEON(0): 720x...@70hz
+(II) RADEON(0): 640x...@60hz
+(II) RADEON(0): 640x...@67hz
+(II) RADEON(0): 640x...@72hz
+(II) RADEON(0): 640x...@75hz
+(II) RADEON(0): 800x...@56hz
+(II) RADEON(0): 800x...@60hz
+(II) RADEON(0): 800x...@72hz
+(II) RADEON(0): 800x...@75hz
+(II) RADEON(0): 832x...@75hz
+(II) RADEON(0): 1024x...@60hz
+(II) RADEON(0): 1024x...@70hz
+(II) RADEON(0): 1024x...@75hz
+(II) RADEON(0): 1280x1...@75hz
+(II) RADEON(0): Manufacturer's mask: 0
+(II) RADEON(0): Supported standard timings:
+(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
+(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
+(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
+(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
+(II) RADEON(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
+(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
+(II) RADEON(0): Supported detailed timing:
+(II) RADEON(0): clock: 146.2 MHz Image Size: 473 x 296 mm
+(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240
h_border: 0
+(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089
v_border: 0
+(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz,
PixClock max 170 MHz
+(II) RADEON(0): Monitor name: VW225
+(II) RADEON(0): Serial No: 97LMQS002145
+(II) RADEON(0): EDID (in hex):
+(II) RADEON(0): 00ffffffffffff000469a02201010101
+(II) RADEON(0): 1c130103802f1e78ee92a0a655489a26
+(II) RADEON(0): 125054bfef00714f818081409500a940
+(II) RADEON(0): b3000101010121399030621a274068b0
+(II) RADEON(0): 3600d9281100001c000000fd00384c1e
+(II) RADEON(0): 5311000a202020202020000000fc0056
+(II) RADEON(0): 573232350a20202020202020000000ff
+(II) RADEON(0): 0039374c4d51533030323134350a00c9
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
-(II) RADEON(0): Total number of valid Screen mode(s) added: 0
-(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
-(II) RADEON(0): Output VGA-0 connected
-(II) RADEON(0): Output DVI-0 disconnected
-(II) RADEON(0): Using fuzzy aspect match for initial modes
-(II) RADEON(0): Output VGA-0 using initial mode 1024x768
+(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
+(II) RADEON(0): EDID data from the display on output: DVI-0
----------------------
+(II) RADEON(0): Manufacturer: ACI Model: 22a0 Serial#: 16843009
+(II) RADEON(0): Year: 2009 Week: 28
+(II) RADEON(0): EDID Version: 1.3
+(II) RADEON(0): Digital Display Input
+(II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
+(II) RADEON(0): Gamma: 2.20
+(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
+(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
+(II) RADEON(0): Default color space is primary color space
+(II) RADEON(0): First detailed timing is preferred mode
+(II) RADEON(0): redX: 0.650 redY: 0.333 greenX: 0.281 greenY: 0.604
+(II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
+(II) RADEON(0): Supported established timings:
+(II) RADEON(0): 720x...@70hz
+(II) RADEON(0): 640x...@60hz
+(II) RADEON(0): 640x...@67hz
+(II) RADEON(0): 640x...@72hz
+(II) RADEON(0): 640x...@75hz
+(II) RADEON(0): 800x...@56hz
+(II) RADEON(0): 800x...@60hz
+(II) RADEON(0): 800x...@72hz
+(II) RADEON(0): 800x...@75hz
+(II) RADEON(0): 832x...@75hz
+(II) RADEON(0): 1024x...@60hz
+(II) RADEON(0): 1024x...@70hz
+(II) RADEON(0): 1024x...@75hz
+(II) RADEON(0): 1280x1...@75hz
+(II) RADEON(0): Manufacturer's mask: 0
+(II) RADEON(0): Supported standard timings:
+(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
+(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
+(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
+(II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
+(II) RADEON(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
+(II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
+(II) RADEON(0): Supported detailed timing:
+(II) RADEON(0): clock: 146.2 MHz Image Size: 473 x 296 mm
+(II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240
h_border: 0
+(II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089
v_border: 0
+(II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz,
PixClock max 170 MHz
+(II) RADEON(0): Monitor name: VW225
+(II) RADEON(0): Serial No: 97LMQS002145
+(II) RADEON(0): EDID (in hex):
+(II) RADEON(0): 00ffffffffffff000469a02201010101
+(II) RADEON(0): 1c130103802f1e78ee92a0a655489a26
+(II) RADEON(0): 125054bfef00714f818081409500a940
+(II) RADEON(0): b3000101010121399030621a274068b0
+(II) RADEON(0): 3600d9281100001c000000fd00384c1e
+(II) RADEON(0): 5311000a202020202020000000fc0056
+(II) RADEON(0): 573232350a20202020202020000000ff
+(II) RADEON(0): 0039374c4d51533030323134350a00c9
+(II) RADEON(0): Panel infos found from DDC detailed: 1680x1050
+(II) RADEON(0): EDID vendor "ACI", prod id 8864
+(II) RADEON(0): Output VGA-0 disconnected
+(II) RADEON(0): Output DVI-0 connected
+(II) RADEON(0): Using exact sizes for initial modes
+(II) RADEON(0): Output DVI-0 using initial mode 1680x1050
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
@@ -500,8 +605,166 @@
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit d0000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Blank CRTC 0 success
+Disable CRTC 0 success
+Disable CRTC memreq 0 success
+Blank CRTC 1 success
+Disable CRTC 1 success
+Disable CRTC memreq 1 success
+(II) RADEON(0): RADEONInitMemoryMap() :
+(II) RADEON(0): mem_size : 0x18000000
+(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0
+(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
+(II) RADEON(0): Depth moves disabled by default
+(II) RADEON(0): Allocating from a screen of 262144 kb
+(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00af0000
+(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00af4000
+(II) RADEON(0): Will use 11200 kb for front buffer at offset 0x00000000
+(II) RADEON(0): Will use 250912 kb for X Server offscreen at offset 0x00af8000
+(II) RADEON(0): RADEONRestoreMemMapRegisters() :
+(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
+(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
+(==) RADEON(0): Backing store disabled
+(WW) RADEON(0): Direct rendering disabled
+(EE) RADEON(0): Acceleration initialization failed
+(II) RADEON(0): Acceleration disabled
+(II) RADEON(0): DPMS enabled
+(==) RADEON(0): Silken mouse enabled
+(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
+Disable CRTC 1 success
+Disable CRTC memreq 1 success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+(II) RADEON(0): mode_set: x 0 y 0
+Mode 1680x1050 - 2240 1089 6
+(II) RADEON(0): RADEONRestoreMemMapRegisters() :
+(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
+(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
+freq: 146250000
+best_freq: 146243000
+best_feedback_div: 817
+best_ref_div: 10
+best_post_div: 8
+(II) RADEON(0): crtc(0) Clock: mode 146250, PLL 146240
+(II) RADEON(0): crtc(0) PLL : refdiv 10, fbdiv 0x331(817), pdiv 8
+Set CRTC 0 PLL success
+Set CRTC Timing success
+Set CRTC 0 Overscan success
+Not using RMX
+scaler 0 setup success
+Set CRTC 0 Source success
+crtc 0 YUV disable setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Output DIG2 encoder setup success
+Output DIG2 encoder setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Enable CRTC memreq 0 success
+Enable CRTC 0 success
+Unblank CRTC 0 success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Output CRT1 disable success
+Blank CRTC 1 success
+Disable CRTC 1 success
+Disable CRTC memreq 1 success
+(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Blank CRTC 0 success
+Disable CRTC 0 success
+Disable CRTC memreq 0 success
+(II) RADEON(0): mode_set: x 0 y 0
+Mode 1680x1050 - 2240 1089 6
+(II) RADEON(0): RADEONRestoreMemMapRegisters() :
+(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
+(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
+freq: 146250000
+best_freq: 146243000
+best_feedback_div: 817
+best_ref_div: 10
+best_post_div: 8
+(II) RADEON(0): crtc(0) Clock: mode 146250, PLL 146240
+(II) RADEON(0): crtc(0) PLL : refdiv 10, fbdiv 0x331(817), pdiv 8
+Set CRTC 0 PLL success
+Set CRTC Timing success
+Set CRTC 0 Overscan success
+Not using RMX
+scaler 0 setup success
+Set CRTC 0 Source success
+crtc 0 YUV disable setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Output DIG2 encoder setup success
+Output DIG2 encoder setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+Enable CRTC memreq 0 success
+Enable CRTC 0 success
+Unblank CRTC 0 success
+(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
+Output DIG0 transmitter setup success
+(--) RandR disabled
+(II) Initializing built-in extension Generic Event Extension
+(II) Initializing built-in extension SHAPE
+(II) Initializing built-in extension MIT-SHM
+(II) Initializing built-in extension XInputExtension
+(II) Initializing built-in extension XTEST
+(II) Initializing built-in extension BIG-REQUESTS
+(II) Initializing built-in extension SYNC
+(II) Initializing built-in extension XKEYBOARD
+(II) Initializing built-in extension XC-MISC
+(II) Initializing built-in extension XINERAMA
+(II) Initializing built-in extension XFIXES
+(II) Initializing built-in extension RENDER
+(II) Initializing built-in extension RANDR
+(II) Initializing built-in extension COMPOSITE
+(II) Initializing built-in extension DAMAGE
+(II) AIGLX: Screen 0 is not DRI2 capable
+(II) AIGLX: Screen 0 is not DRI capable
+(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
+(II) GLX: Initialized DRISWRAST GL provider for screen 0
+(II) RADEON(0): Setting screen physical size to 473 x 296
+(WW) <default pointer>: No Device specified, looking for one...
+(II) <default pointer>: found Device "/dev/wsmouse"
+(**) <default pointer>: Protocol: WSMouse
+(**) Option "CorePointer"
+(**) <default pointer>: always reports core events
+(**) Option "Device" "/dev/wsmouse"
+(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
+(**) <default pointer>: ZAxisMapping: buttons 4 and 5
+(**) <default pointer>: Buttons: 9
+(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
+(**) <default pointer>: (accel) keeping acceleration scheme 1
+(**) <default pointer>: (accel) filter chain progression: 2.00
+(**) <default pointer>: (accel) filter stage 0: 20.00 ms
+(**) <default pointer>: (accel) set acceleration profile 0
+(**) Option "CoreKeyboard"
+(**) <default keyboard>: always reports core events
+(**) Option "Protocol" "standard"
+(**) <default keyboard>: Protocol: standard
+(--) <default keyboard>: using wscons layout us
+(**) Option "AutoRepeat" "500 30"
+(**) Option "XkbRules" "xorg"
+(**) <default keyboard>: XkbRules: "xorg"
+(**) Option "XkbModel" "pc105"
+(**) <default keyboard>: XkbModel: "pc105"
+(**) Option "XkbLayout" "us"
+(**) <default keyboard>: XkbLayout: "us"
+(**) Option "CustomKeycodes" "off"
+(**) <default keyboard>: CustomKeycodes disabled
+(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
