Then if no one objects I'll commit it tomorrow.
On Sun, Jan 17, 2010 at 04:54:09PM -0600, Marco Peereboom wrote:
> Has this been tested on all variants of the chip?
>
> On Sun, Jan 17, 2010 at 07:40:29PM +0000, Tom Murphy wrote:
> > Hi,
> >
> > I'd like to point out that Roland Dreier's patch as detailed
> > here: http://www.mail-archive.com/m...@openbsd.org/msg83528.html
> > Works great on my little Soekris 5501 with a RT2661. (dmesg attached
> > to end of this email.)
> >
> > I do still get the odd wireless drop for 15-20 seconds, but it
> > no longer brings up the OACTIVE flag on ral0 and it doesn't make
> > the system completely freeze (no way of getting a dump, have to
> > hard reset.)
> >
> > I emailed damien@ on December 1st and got no response. The author
> > of the patch has expressed his frustration at being able to contact
> > a developer to get this committed.
> >
> > I would be more than happy to do testing. Feel free to contact me..
> > I know it's hard to test all hardware devices when there is a lack of them.
> >
> > Regards,
> >
> > Tom
> >
> > (kernel was compiled by me, with aforementioned patch above, and is GENERIC)
> >
> > OpenBSD 4.6-current (GENERIC) #2: Fri Nov 27 12:20:04 GMT 2009
> > r...@pertho.net:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class)
> > 500 MHz
> > cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
> > real mem = 536440832 (511MB)
> > avail mem = 511152128 (487MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 20/80/26, BIOS32 rev. 0 @ 0xfac40
> > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
> > pcibios0: pcibios_get_intr_routing - function not supported
> > pcibios0: PCI IRQ Routing information unavailable.
> > pcibios0: PCI bus #0 is the last bus
> > bios0: ROM list: 0xc8000/0xa800
> > cpu0 at mainbus0: (uniprocessor)
> > amdmsr0 at mainbus0
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > io address conflict 0x6100/0x100
> > io address conflict 0x6200/0x200
> > pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
> > glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
> > vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
> > address 00:00:24:cb:a6:64
> > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> > 0x004063, model 0x0034
> > vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
> > address 00:00:24:cb:a6:65
> > ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> > 0x004063, model 0x0034
> > vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
> > address 00:00:24:cb:a6:66
> > ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> > 0x004063, model 0x0034
> > vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
> > address 00:00:24:cb:a6:67
> > ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> > 0x004063, model 0x0034
> > ral0 at pci0 dev 14 function 0 "Ralink RT2661" rev 0x00: irq 10, address
> > 00:14:85:d5:39:bb
> > ral0: MAC/BBP RT2661D, RF RT2529 (MIMO XR)
> > glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0, 32-bit
> > 3579545Hz timer, watchdog, gpio
> > gpio0 at glxpcib0: 32 pins
> > pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
> > wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 1: <WDC WD1200BEVS-00VAT0>
> > wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> > pciide0: channel 1 ignored (disabled)
> > ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version
> > 1.0, legacy support
> > ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> > isa0 at glxpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: console
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
> > gpio1 at nsclpcsio0: 29 pins
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > usb1 at ohci0: USB revision 1.0
> > uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
> > biomask e1c7 netmask ffe7 ttymask ffff
> > mtrr: K6-family MTRR support (2 registers)
> > vscsi0 at root
> > scsibus0 at vscsi0: 256 targets
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
