On Fri, 18 Jun 2010 22:15:00 -0500 (CDT)
[email protected] wrote:
> This patch is for an issue seen with ACPI on a HP Laptop but wanted
> to get some additional testing done. Some debugging prints in for
> now.
> [...]
Third hunk did not apply cleanly; I edited by hand.
Boots now without disabling acpi. Still only one core being used.
dmesg follows. apm -a and apm -b seem to work now. What other info
can I provide?
OpenBSD 4.7-current (GENERIC) #0: Sat Jun 19 11:07:47 PDT 2010
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
cpu0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class)
2.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE
real mem = 2072080384 (1976MB)
avail mem = 1996599296 (1904MB)
RTC BIOS diagnostic error
7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 @ 0x7bac3000
(21 entries)
bios0: vendor Hewlett-Packard version "68PZI Ver. F.0F" date 10/20/2009
bios0: Hewlett-Packard HP ProBook 4510s
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
copy objref: 5b12 \\_OSI
copy objref: 5b12 \\_OSI
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0MULTI: \\_PR_.CPU0.COSC.UID0
MULTI: \\_PR_.CPU0.COSC.UID0
: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PFN6
acpipwrres4 at acpi0: PFN7
acpipwrres5 at acpi0: PFN8
acpipwrres6 at acpi0: PFN9
acpipwrres7 at acpi0: PFNA
acpipwrres8 at acpi0: PFNB
acpipwrres9 at acpi0: PGF0
acpitz0 at acpi0: critical temperature 108 degC
acpipwrres10 at acpi0: PFN0
acpipwrres11 at acpi0: PFN1
acpipwrres12 at acpi0: PFN2
acpipwrres13 at acpi0: PFN3
acpipwrres14 at acpi0: PFN4
acpipwrres15 at acpi0: PFN5
acpitz1 at acpi0: critical temperature 105 degC
acpitz2 at acpi0: critical temperature 108 degC
acpitz3 at acpi0: critical temperature 105 degC
acpitz4 at acpi0: critical temperature 108 degC
acpitz5 at acpi0: critical temperature 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 02691 2009/06/24 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
copy objref: 5b12 \\_SB_.PCI0.PEGP.DGFX.PDOS
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: TV__
acpivout3 at acpivideo0: DVI_
acpivout4 at acpivideo0: DD04
acpivideo1 at acpi0: GFX0
copy objref: 5b12 \\_SB_.PCI0.GFX0.PDOS
acpivout5 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 0xd1000/0x1000
cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq
11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int
17 (irq 11)
azalia0: codecs: Analog Devices AD1984A, Intel/0x2802, using Analog Devices
AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
11)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 int 17
(irq 11), MIMO 1T2R, MoW, address 00:26:c6:0d:99:44
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq
10)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq
10)
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq
11)
pci5 at ppb4 bus 133
mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, Yukon-2
Extreme rev. B0 (0x2): apic 1 int 17 (irq 11)
msk0 at mskc0 port A: address 18:a9:05:cf:b6:67
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
copy objref: 5b12 \\_PR_.CPU0._PSS
copy objref: 5b12 \\_PR_.CPU0._PPC
copy objref: 5b12 \\_PR_.CPU0._PSS
copy objref: 5b12 \\_PR_.CPU0._PPC
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
