Hi,
I have got a WLI-UC-GNHP device from Buffalo and it works in all
supported modes using run(4) and the appended diff. Could you please
include it?
Thanks,
OpenBSD 4.8-current (GENERIC.MP) #1: Mon Jan 10 23:29:26 JST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3747008512 (3573MB)
avail mem = 3633258496 (3464MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf71c0 (44 entries)
bios0: vendor Dell Inc. version "A11" date 06/19/2008
bios0: Dell Inc. XPS M1330
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG BOOT SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S3)
RP03(S3) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) MBTN(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 13 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 9 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 104 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL KP4058" serial 108 type LION oem "Sanyo"
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivout0 at acpivideo1: TV__
acpivout1 at acpivideo1: CRT_
acpivout2 at acpivideo1: LCD_
acpivout3 at acpivideo1: DVI_
acpivideo2 at acpi0: VID2
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 21 (irq 9)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 22 (irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02:
apic 2 int 21 (irq 9)
azalia0: codecs: Sigmatel STAC9228X, CMD Technology/0x1392, using
Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2
int 16 (irq 0)
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 0)
pci2 at ppb1 bus 12
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 2 int 17 (irq 10), MoW2, address 00:1f:3c:86:a0:f6
ppb2 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: apic 2
int 19 (irq 0)
pci3 at ppb2 bus 13
ppb3 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 2
int 17 (irq 0)
pci4 at ppb3 bus 9
bge0 at pci4 dev 0 function 0 "Broadcom BCM5906M" rev 0x02, BCM5906 A2
(0xc002): apic 2 int 17 (irq 10), address 00:1d:09:43:25:12
brgphy0 at bge0 phy 1: BCM5906 10/100baseTX PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2
int 21 (irq 9)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2
int 22 (irq 7)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2
int 20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci5 at ppb4 bus 3
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 1 function 0 not configured
sdhc0 at pci5 dev 1 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2
int 18 (irq 4)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 1 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 1 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 1 function 4 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD+-RW UJ-857G, Z111> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x02: apic 2
int 17 (irq 10), AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9200420ASG, 3.AD> SCSI3 0/direct fixed
sd0: 190782MB, 512 bytes/sec, 390721968 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic
2 int 17 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 7600MB, 512 bytes/sec, 15564800 sec total
run0 at uhub1 port 2 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
4c:e6:76:07:1d:45
uvideo0 at uhub1 port 6 configuration 1 interface 0 "OmniVision
Technologies, Inc. -7670-07.09.28.1 Laptop Integrated Webcam" rev
2.00/1.00 addr 3
video0 at uvideo0
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Device USB
Device" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Device USB
Device" rev 1.10/3.00 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=7
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Index: share/man/man4/run.4
===================================================================
RCS file: /cvs/src/share/man/man4/run.4,v
retrieving revision 1.32
diff -u -p -r1.32 run.4
--- share/man/man4/run.4 6 Jan 2011 16:30:41 -0000 1.32
+++ share/man/man4/run.4 10 Jan 2011 14:06:29 -0000
@@ -102,6 +102,7 @@ The following adapters should work:
.It Buffalo WLI-UC-G300N
.It Buffalo WLI-UC-GN
.It Buffalo WLI-UC-GNM
+.It Buffalo WLI-UC-GNHP
.It Corega CG-WLUSB2GNL
.It Corega CG-WLUSB2GNR
.It Corega CG-WLUSB300AGN
Index: sys/dev/usb/if_run.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/if_run.c,v
retrieving revision 1.82
diff -u -p -r1.82 if_run.c
--- sys/dev/usb/if_run.c 30 Dec 2010 05:22:51 -0000 1.82
+++ sys/dev/usb/if_run.c 10 Jan 2011 14:06:32 -0000
@@ -199,6 +199,7 @@ static const struct usb_devno run_devs[]
USB_ID(MELCO, WLIUCG300N),
USB_ID(MELCO, WLIUCGN),
USB_ID(MELCO, WLIUCGNM),
+ USB_ID(MELCO, WLIUCGNHP),
USB_ID(MOTOROLA4, RT2770),
USB_ID(MOTOROLA4, RT3070),
USB_ID(MSI, RT3070_1),
Index: sys/dev/usb/usbdevs
===================================================================
RCS file: /cvs/src/sys/dev/usb/usbdevs,v
retrieving revision 1.536
diff -u -p -r1.536 usbdevs
--- sys/dev/usb/usbdevs 1 Jan 2011 16:00:57 -0000 1.536
+++ sys/dev/usb/usbdevs 10 Jan 2011 14:06:32 -0000
@@ -2597,6 +2597,7 @@ product MELCO RT2870_1 0x0148 RT2870
product MELCO RT2870_2 0x0150 RT2870
product MELCO WLIUCGN 0x015d WLI-UC-GN
product MELCO WLIUCGNM 0x01a2 WLI-UC-GNM
+product MELCO WLIUCGNHP 0x0158 WLI-UC-GNHP
/* MetaGeek tagged products */
product MECANIQUE WISPY 0x083e MetaGeek Wi-Spy
