On Thu, Apr 28, 2011 at 07:21:16AM +1000, Jonathan Gray wrote:
> On Tue, Jan 25, 2011 at 06:24:28PM +0800, Kevin Lo wrote:
> > Hi,
> >
> > The following diff adds support for Atheros AR8151/AR8152 chipsets;
> > mostly from FreeBSD. It also fixes an issue i386/6311.
> > Tested on Acer AOD255E.
>
> Is there an updated diff for this? It seems this never made it
> into the tree.
I have acquired a netboot (packard bell dot s), which I think uses this NIC. Is
there an updated diff?
Dmesg:
OpenBSD 4.9-current (RAMDISK_CD) #41: Thu Apr 21 00:17:13 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
real mem = 1061335040 (1012MB)
avail mem = 1036996608 (988MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/10/11, SMBIOS rev. 2.6 @ 0xe8080 (36
entries)
bios0: vendor Packard Bell version "V3.14(DDR3)" date 01/10/2011
bios0: Packard Bell DOTS E2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT WDAT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (EXP1)
acpiprt2 at acpi0: bus 2 (EXP2)
acpiprt3 at acpi0: bus -1 (EXP3)
acpiprt4 at acpi0: bus -1 (EXP4)
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
(irq 255)
pci1 at ppb0 bus 1
"Attansic Technology L2C" rev 0xc1 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
(irq 255)
pci2 at ppb1 bus 2
"Broadcom BCM4313" rev 0x01 at pci2 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 18
(irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 20
(irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 21
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 22
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 22
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 4 int 17
(irq 10), AHCI 1.1
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54502, PB2O> SCSI3 0/direct
fixed naa.5000cca62bf2b42f
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3872 blocks
"Y2B2D0JXB WebCam" rev 2.00/0.04 addr 2 at uhub0 port 4 not configured
softraid0 at root
PXE boot MAC address 1c:75:08:d5:53:c4, interface unknown
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x0204 product
0x6025" rev 1.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <CBM, Flash Disk, 2.00> SCSI2 0/direct removable
sd1: 486MB, 512 bytes/sec, 996415 sec total
--
Best Regards
Edd Barrett
http://www.theunixzoo.co.uk
