On Wed, 11 May 2011, Ariane van der Steldt wrote:
Hi,
The newest version of vmmap (as of now) is vmmap_sys.diff.26
Since the diff is scheduled to go in may 20 and has a lot of changes and
fixes, please test this diff and report any failures and successes.
If I start a program with this patch (usually I just use top),
then gdb top `pgrep top`, then bt, the machine hangs.
If running the the gdb commands on first console, I get ddb :
panic: kernel diagnostic assertion "start >= srcmap->min_offset && end <= srcmap
->max_offset" failed: file "../../../../uvm/uvm_map.c", line 3947
Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>
Apparently the machine messes with memory so I don't get
contents of trace and ps in dmesg on next boot as hinted in man crash, and I
don't have serial. If this is important, I can manually type some
of it.
--
_
_ //
\\// Eivind Evensen
\/
OpenBSD 4.9-current (GENERIC) #0: Thu May 12 18:04:33 CEST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF
real mem = 233238528 (222MB)
avail mem = 218836992 (208MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/18/04, BIOS32 rev. 0 @ 0xfd740, SMBIOS
rev. 2.31 @ 0xdf010 (28 entries)
bios0: vendor Hewlett-Packard version "F.10" date 08/18/2004
bios0: Hewlett-Packard hp pavilion ze4900 (PJ943EA#ABN)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd740/0x8c0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xcc00! 0xcd000/0x1000 0xdf000/0x1000! 0xe0000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xdf00000/0x400
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1: irq 10
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: couldn't map
interrupt
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
mem address conflict 0xdf01000/0x1000
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:c0:9f:50:32:6a
rlphy0 at rl0 phy 0: RTL internal PHY
cbb0 at pci1 dev 5 function 0 "TI PCI1410 CardBus" rev 0x02: couldn't map
interrupt
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: 24-bit timer
at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST94019A>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, CDRW/DVD CDD5263, UH89> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id 0x43585430 (Conexant CXT48)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 3, polling enabled
mtrr: Pentium Pro MTRR support
uhub3 at uhub0 port 2 "NEC hub" rev 2.00/1.00 addr 2
mos0 at uhub3 port 3 configuration 1 interface 0 "Moschip Semiconductor USB-MAC
Controller" rev 2.00/1.00 addr 3
mos0: MCS7830, address 00:0a:cd:14:eb:45
ukphy0 at mos0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x000000, model 0x0000
uhub3: device problem, disabling port 4
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
