Hey tech@,
I think I found some low-hanging fruit, the following diff works
for my friend that recently purchased the DGE-530T at my recommendation
only to find out its no-longer supported by the sk driver as of the C1
revision, they changed the chip entirely to realtek 8169.
I found the relevant info already existing in pcidevs.h and
pcidevs_data.h. The following diff adds the card to re(4).
Note that I used 5.1's release to do this as its what he was
running the diff below is for -current (though it pretty much
looks like nothing has changed there between 5.1 and now)
any tips or hints are welcome
ifconfig output and dmesg from friends machine in question showing
a now-working card attached :)
Index: sys/dev/pci/if_re_pci.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/if_re_pci.c,v
retrieving revision 1.34
diff -u -p -u -p -r1.34 if_re_pci.c
--- sys/dev/pci/if_re_pci.c 9 Jun 2011 19:34:42 -0000 1.34
+++ sys/dev/pci/if_re_pci.c 13 Sep 2012 18:14:12 -0000
@@ -72,6 +72,7 @@ const struct pci_matchid re_pci_devices[
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169SC },
{ PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_CGLAPCIGT },
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE528T },
+ { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE530T_C1 },
{ PCI_VENDOR_USR2, PCI_PRODUCT_USR2_USR997902 },
{ PCI_VENDOR_TTTECH, PCI_PRODUCT_TTTECH_MC322 }
};
IFCONFIG
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33196
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:03:47:d2:47:a8
priority: 0
media: Ethernet autoselect (none)
status: no carrier
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:24:01:00:2d:f5
priority: 0
groups: egress
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet6 fe80::224:1ff:fe00:2df5%sk0 prefixlen 64 scopeid 0x2
inet 192.168.0.14 netmask 0xffffff00 broadcast 192.168.0.255
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 28:10:7b:c9:5d:b1
priority: 0
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet 10.0.0.1 netmask 0xff000000 broadcast 10.255.255.255
inet6 fe80::2a10:7bff:fec9:5db1%re0 prefixlen 64 scopeid 0x3
enc0: flags=0<>
priority: 0
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33196
priority: 0
groups: pflog
DMESG before:
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2146758656 (2047MB)
avail mem = 2101518336 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/31/01, BIOS32 rev. 0 @ 0xfda74, SMBIOS
rev. 2.3 @ 0xf0fd0 (57 entries)
bios0: vendor Intel Corp. version "PT84510A.15A.0003.P01.0110311619" date
10/31/2001
bios0: Gateway E-3600
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices PBTN(S4) PCI1(S4) UAR1(S4) USB_(S3) USB2(S3) AC9_(S4)
SMB_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 1.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpipwrres0 at acpi0: FDDP
acpipwrres1 at acpi0: URP1
acpipwrres2 at acpi0: URP2
acpipwrres3 at acpi0: LPTP
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1000 0xcb800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX 100" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03, i82562: apic 2 int 20,
address 00:03:47:d2:47:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
skc0 at pci2 dev 10 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite (0x9):
apic 2 int 22
sk0 at skc0 port A: address 00:24:01:00:2d:f5
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
"D-Link DGE-530T C1" rev 0x10 at pci2 dev 11 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP1203N>
wd0: 16-sector PIO, LBA48, 114497MB, 234490943 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3750640A>
wd1: 16-sector PIO, LBA48, 715403MB, 1465147055 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, CD-S500/A, 1.3D> ATAPI 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: apic 2 int 19
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: apic 2 int 17
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: adm1025
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: apic 2 int 23
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x05: apic 2 int 17,
ICH2 AC97
ac97: codec id 0x41445360 (Analog Devices AD1885)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 2 "Intel product 0x1122" rev 1.10/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f73e8c7434243071.a) swap on wd0b dump on wd0b
syncing disks... done
rebooting...
DMESG after
OpenBSD 5.1 (GENERIC) #1: Wed Sep 12 01:31:55 PDT 2012
r...@slipgate.sv.lan:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 2146758656 (2047MB)
avail mem = 2101542912 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/31/01, BIOS32 rev. 0 @ 0xfda74, SMBIOS
rev. 2.3 @ 0xf0fd0 (57 entries)
bios0: vendor Intel Corp. version "PT84510A.15A.0003.P01.0110311619" date
10/31/2001
bios0: Gateway E-3600
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices PBTN(S4) PCI1(S4) UAR1(S4) USB_(S3) USB2(S3) AC9_(S4)
SMB_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpipwrres0 at acpi0: FDDP
acpipwrres1 at acpi0: URP1
acpipwrres2 at acpi0: URP2
acpipwrres3 at acpi0: LPTP
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1000 0xcb800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX 100" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05
pci2 at ppb1 bus 2
fxp0 at pci2 dev 8 function 0 "Intel 82562" rev 0x03, i82562: apic 2 int 20,
address 00:03:47:d2:47:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
skc0 at pci2 dev 10 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite (0x9):
apic 2 int 22
sk0 at skc0 port A: address 00:24:01:00:2d:f5
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
re0 at pci2 dev 11 function 0 "D-Link DGE-530T C1" rev 0x10: RTL8169/8110SB
(0x1000), apic 2 int 23, address 28:10:7b:c9:5d:b1
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP1203N>
wd0: 16-sector PIO, LBA48, 114497MB, 234490943 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3750640A>
wd1: 16-sector PIO, LBA48, 715403MB, 1465147055 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, CD-S500/A, 1.3D> ATAPI 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: apic 2 int 19
ichiic0 at pci0 dev 31 function 3 "Intel 82801BA SMBus" rev 0x05: apic 2 int 17
iic0 at ichiic0
admtm0 at iic0 addr 0x2d: adm1025
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC3200CL3.0
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: apic 2 int 23
auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97" rev 0x05: apic 2 int 17,
ICH2 AC97
ac97: codec id 0x41445360 (Analog Devices AD1885)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhub2 at uhub1 port 2 "Intel product 0x1122" rev 1.10/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f73e8c7434243071.a) swap on wd0b dump on wd0b
