Hi. A friend of mine get D-Link DUB-E100, but it is build on another chip
revision. This diff adds support for this adapter. Tested on amd64 for a
couple of days, but without high load.
Needs further testing or OK to commit?
Index: if_axe.c
===================================================================
RCS file: /cvs/src/sys/dev/usb/if_axe.c,v
retrieving revision 1.112
diff -u -r1.112 if_axe.c
--- if_axe.c 14 Nov 2012 17:00:23 -0000 1.112
+++ if_axe.c 18 Nov 2012 14:27:07 -0000
@@ -160,6 +160,7 @@
{ { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB2_TX }, 0},
{ { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100}, 0 },
{ { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100B1 }, AX772 },
+ { { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100C1 }, AX772 | AX772B },
{ { USB_VENDOR_GOODWAY, USB_PRODUCT_GOODWAY_GWUSB2E}, 0 },
{ { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_ETGUS2 }, AX178 },
{ { USB_VENDOR_JVC, USB_PRODUCT_JVC_MP_PRX1}, 0 },
Index: usbdevs
===================================================================
RCS file: /cvs/src/sys/dev/usb/usbdevs,v
retrieving revision 1.591
diff -u -r1.591 usbdevs
--- usbdevs 14 Nov 2012 16:53:49 -0000 1.591
+++ usbdevs 18 Nov 2012 14:27:07 -0000
@@ -1420,6 +1420,7 @@
/* D-Link products */
/*product DLINK DSBS25 0x0100 DSB-S25 serial */
product DLINK DUBE100 0x1a00 10/100 Ethernet
+product DLINK DUBE100C1 0x1a02 DUB-E100 rev C1
product DLINK DSB650TX4 0x200c 10/100 Ethernet
product DLINK DWL120E 0x3200 DWL-120 rev E
product DLINK DWA130C 0x3301 DWA-130 rev C
