On Fri, Feb 22, 2013 at 05:33:33PM -0800, Mike Larkin wrote:
> On Fri, Feb 22, 2013 at 03:59:59PM -0800, johnd wrote:
> > I just am running 5.2 GENERIC>MP#368 amd64
> >
> > if I run startx it comes up fine
> >
> > if I try to switch to a virtual console or kill X (pkill or ctrl
> > alt-ctrl-bspace) I am left on a screen that can be black or
> > sometimes it has blue and red pixels light up
> >
> >
> > from the blackish screen if I type somethng like:
> > touch foo
> > startx
> >
> > it starts x an if I run ls I see by file...
> >
> >
> > Any ideas?
> >
> > I'm running on a samsung np300e5a laptop
> >
>
> ^^^^ that doesn't help anyone. Provide a proper dmesg.
-------dmesg output---------
OpenBSD 5.2 (RAMDISK_CD) #207: Wed Aug 1 10:19:00 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class)
2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1341120512 (1278MB)
avail mem = 1311494144 (1250MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/09/05, BIOS32 rev. 0 @ 0xfc260,
SMBIOS rev. 2.3 @ 0xec000 (40 entries)
bios0: vendor TOSHIBA version "Version 1.30" date 06/09/2005
bios0: TOSHIBA PORTEGE S100
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT BOOT APIC MCFG SSDT SSDT
acpimadt0 at acpi0 addr 0xfec80000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PCIB)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus 1 (PCI1)
bios0: ROM list: 0xc0000/0x10000 0xd4000/0x8000 0xe0000/0x10000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 Go" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2
EC rev. A2 (0x1): apic 1 int 16
msk0 at mskc0 port A: address 00:0e:7b:10:d7:75
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int
23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int
19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int
18
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int
23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci3 at ppb2 bus 3
iwi0 at pci3 dev 5 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic
1 int 22, address 00:12:f0:8e:ac:fd
cbb0 at pci3 dev 11 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int
21
"TI PCI7XX1 FireWire" rev 0x00 at pci3 dev 11 function 2 not configured
"TI PCI7XX1 Secure Data" rev 0x00 at pci3 dev 11 function 4 not
configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
"Intel 82801FB AC97" rev 0x03 at pci0 dev 30 function 2 not configured
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 functi\^?n 3 not
configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.00> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: apic 1
int 19, AHCI 1.0
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHT2060B, 0000> SCSI3
0/direct fixed t10.ATA_FUJITSU_MHT2060BH_NR0GT55264EU
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.2 (GENERIC) #278: Wed Aug 1 10:04:16 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class)
2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1341120512 (1278MB)
avail mem = 1308352512 (1247MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/09/05, BIOS32 rev. 0 @ 0xfc260,
SMBIOS rev. 2.3 @ 0xec000 (40 entries)
bios0: vendor TOSHIBA version "Version 1.30" date 06/09/2005
bios0: TOSHIBA PORTEGE S100
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT BOOT APIC MCFG SSDT SSDT
acpi0: wakeup devices COM_(S3) USB1(S3) USB2(S3) USB3(S3) EHCI(S3)
AMDM(S3) GLAN(S4) LID_(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfec80000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PCIB)
acpiprt2 at acpi0: bus 2 (PEX1)
acpiprt3 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0: C3, C2, PSS
acpipwrres0 at acpi0: PDOC
acpitz0 at acpi0: critical temperature is 114 degC
acpibtn0 at acpi0: LID_
acpibat0 at acpi0: BAT1 not present
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpitoshiba0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0x10000 0xd4000/0x8000 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1600, 1330, 1060, 800
MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 Go" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x15, Yukon-2
EC rev. A2 (0x1): apic 1 int 16
msk0 at mskc0 port A: address 00:0e:7b:10:d7:75
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int
23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int
19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int
18
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int
23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci3 at ppb2 bus 3
iwi0 at pci3 dev 5 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic
1 int 22, address 00:12:f0:8e:ac:fd
cbb0 at pci3 dev 11 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int
21
"TI PCI7XX1 FireWire" rev 0x00 at pci3 dev 11 function 2 not configured
sdhc0 at pci3 dev 11 function 4 "TI PCI7XX1 Secure Data" rev 0x00: apic
1 int 23
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1
int 17, ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA765 DVD/CDRW, 1.00> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: apic 1
int 19, AHCI 1.0
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHT2060B, 0000> SCSI3
0/direct fixed t10.ATA_FUJITSU_MHT2060BH_NR0GT55264EU
sd0: 57231MB, 512 bytes/sector, 117210240 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7321
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (a6d1ad36795b9a83.a) swap on sd0b dump on sd0b
