Hi,
Upgraded my Soekris net5501 to the latest snapshot:
OpenBSD 5.3 (GENERIC) #45: Wed Feb 27 13:42:28 MST 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
and during one of the reboots got this:
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
setting tty flags
pf enabled
ddb.panic: 1 -> 1
ddb.console: 0 -> 1
net.inet.ip.forwarding: 0 -> 1
starting network
starting early daemons: syslogd nameduvm_fault(0xd0a2dd40, 0xd5d7c000, 0, 1) -
e
kernel: page fault trap, code=0
Stopped at bcopy+0x1a: repe movsl (%esi),%es:(%edi)
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
1637 3787 3787 70 3 0 biowait named
3787 5609 3787 0 3 0x80 netio named
5609 23313 29579 0 3 0x80 piperd named
23313 24670 29579 0 3 0x88 pause sh
24670 29579 29579 0 3 0x88 pause sh
279 26321 26321 73 3 0 biowait syslogd
26321 1 26321 0 3 0x80 netio syslogd
29579 1 29579 0 3 0x88 pause sh
13 0 0 0 3 0x100200 aiodoned aiodoned
12 0 0 0 3 0x100200 syncer update
11 0 0 0 3 0x100200 cleaner cleaner
10 0 0 0 3 0x100200 reaper reaper
9 0 0 0 3 0x100200 pgdaemon pagedaemon
8 0 0 0 3 0x100200 bored crypto
7 0 0 0 3 0x100200 pftm pfpurge
6 0 0 0 3 0x100200 usbtsk usbtask
5 0 0 0 3 0x100200 usbatsk usbatsk
4 0 0 0 3 0x100200 bored syswq
* 3 0 0 0 7 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> trace
bcopy(d5cd1100,96000,3b9aca00,2,1) at bcopy+0x1a
m_copym2(d5cd1100,0,3b9aca00,2,46) at m_copym2+0x2e
bridge_input(d15ab434,d5ce5800,d5cd1100,f5395e70,d02030dd) at bridge_input+0x2e
1
ether_input(d15ab434,0,d5cd1100,800,2) at ether_input+0x39d
sis_rxeof(d15ab400,d300,10,f5395f0c,d15eda00) at sis_rxeof+0x1a6
sis_intr(d15ab400) at sis_intr+0x148
Xrecurse_legacy6() at Xrecurse_legacy6+0xb7
--- interrupt ---
cpu_idle_cycle(d0b0e7c0) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0bc9e28
ddb>
Then tried to reboot the box:
ddb> boot reboot
panic: wdc_exec_command: polled command not done
Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(d08fdc7c,f5395a4c,d089b5d8,f5395a4c,d5d64060) at Debugger+0x4
panic(d089b5d8,d5d64060,f5395a70,d05b8034,0) at panic+0x5d
wdc_exec_command(d1671110,f5395a84,f5395aa0,e7,40000000) at
wdc_exec_command+0x
10d
wd_flushcache(d1673c00,10,0,d162f900,d15ab000) at wd_flushcache+0x7e
wdactivate(d1673c00,5,0,d0412b43,0) at wdactivate+0xb3
config_activate_children(d1671000,5,6206,0,c000) at
config_activate_children+0x
45
config_activate_children(d1472e00,5,0,d155ef80,d1472e00) at
config_activate_chi
ldren+0x45
pciactivate(d1472e00,5,f5395b80,d03eb38d,0) at pciactivate+0x70
config_activate_children(d155efc0,5,f5395bb0,d03b7155,d) at
config_activate_chi
ldren+0x45
boot(4804,f5395be4,f5395c70,d03b5014,d02005ee) at boot+0x5a
db_boot_reboot_cmd(d02005ee,0,ffffffff,f5395be8,0) at
db_boot_reboot_cmd+0x12
db_command(d09e4c00,d09e4a20,d144f663,d02005ee,f5395d6c) at
db_command+0x124
db_command_loop(d02005ee,f5395cd8,f5395ce0,d03bf23d,800) at
db_command_loop+0x7
1
db_trap(6,0,58,6,d5d7c000) at db_trap+0xc0
kdb_trap(6,0,f5395d6c,1,e) at kdb_trap+0xc7
trap() at trap+0x238
--- trap (number -1769486) ---
Bad frame pointer: 0xd5d7bffe
0:
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
1637 3787 3787 70 3 0 biowait named
3787 5609 3787 0 3 0x80 netio named
5609 23313 29579 0 3 0x80 piperd named
23313 24670 29579 0 3 0x88 pause sh
24670 29579 29579 0 3 0x88 pause sh
279 26321 26321 73 3 0 biowait syslogd
26321 1 26321 0 3 0x80 netio syslogd
29579 1 29579 0 3 0x88 pause sh
13 0 0 0 3 0x100200 aiodoned aiodoned
12 0 0 0 3 0x100200 syncer update
11 0 0 0 3 0x100200 cleaner cleaner
10 0 0 0 3 0x100200 reaper reaper
9 0 0 0 3 0x100200 pgdaemon pagedaemon
8 0 0 0 3 0x100200 bored crypto
7 0 0 0 3 0x100200 pftm pfpurge
6 0 0 0 3 0x100200 usbtsk usbtask
5 0 0 0 3 0x100200 usbatsk usbatsk
4 0 0 0 2 0x100200 syswq
* 3 0 0 0 7 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> boot reboot
panic: wdc_exec_command: polled command not done
Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>
Full dmesg:
booting hd0a:/bsd: 8404228+1102404 [52+381152+367486]=0x9c7d50
entry point at 0x200120
[ using 749064 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3 (GENERIC) #45: Wed Feb 27 13:42:28 MST 2013
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 500
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem = 536408064 (511MB)
avail mem = 516653056 (492MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0: (uniprocessor)
amdmsr0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
0:20:0: io address conflict 0x6100/0x100
0:20:0: io address conflict 0x6200/0x200
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address
00:00:24:cc:e5:7c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address
00:00:24:cc:e5:7d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address
00:00:24:cc:e5:7e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address
00:00:24:cc:e5:7f
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
ppb0 at pci0 dev 14 function 0 "TI PCI2250 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
sis0 at pci1 dev 0 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:cc:d4:7c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci1 dev 1 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 6,
address 00:00:24:cc:d4:7d
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci1 dev 2 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:cc:d4:7e
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
sis3 at pci1 dev 3 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 6,
address 00:00:24:cc:d4:7f
nsphyter3 at sis3 phy 0: DP83815 10/100 PHY, rev. 1
hifn0 at pci0 dev 17 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES ARC4 MD5
SHA1 RNG AES PK, 32KB dram, irq 15
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFX3-004G>
wd0: 4-sector PIO, LBA, 3919MB, 8027712 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7, version 1.0,
legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
mtrr: K6-family MTRR support (2 registers)
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (5ef77dcdc0639de3.a) swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
setting tty flags
pf enabled
ddb.panic: 1 -> 1
ddb.console: 0 -> 1
net.inet.ip.forwarding: 0 -> 1
starting network
starting early daemons: syslogd named ntpd isakmpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd snmpd ifstated dhcpd smtpd ftpproxy tftpd inetd.
starting package daemons: ddclient.
starting local daemons: watchdogd cron.
--
best regards
q#
