-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Sperling Sent: Thursday, February 28, 2013 12:16 PM To: Edd Barrett Cc: [email protected] Subject: Re: Wake from zzz causes panic on thinkpad x60
On Thu, Feb 28, 2013 at 04:59:12PM +0000, Edd Barrett wrote: > Hi, > > Went to run some TESTS for release and I am seeing panics when waking > my thinkpad x60 from zzz. > > I didn't have a serial line attached to get trace and ps, so I have > taken pictures of the kernel debugger. Sorry about that. > > http://farm9.staticflickr.com/8505/8516467142_1f3580e87a_c.jpg I've seen this panic in usb_abort_task_thread() on an x60s before. It doesn't happen often. It's not a new issue in recent snaps. A while back I took a brief look at the code but couldn't figure out what's wrong. I work around it by unplugging USB devices before suspend. I get it every resume on my E6400 with no external USB devices plugged in. OpenBSD 5.3 (GENERIC.MP) #53: Wed Feb 27 13:29:57 MST 2013 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4176793600 (3983MB) avail mem = 4043112448 (3855MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6520 (57 entries) bios0: vendor Dell Inc. version "A19" date 10/30/2009 bios0: Dell Inc. Latitude E6400 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG TCPA SLIC SSDT acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 2394.41 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 3 (PCIE) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 11 (RP01) acpiprt3 at acpi0: bus 12 (RP02) acpiprt4 at acpi0: bus 13 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus 0 (PCI0) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 107 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 model "DELL FU27481" serial 65534 type LION oem "Sanyo" acpibat1 at acpi0: BAT1 not present acpivideo0 at acpi0: VID_ acpivideo1 at acpi0: VID_ acpivout0 at acpivideo1: LCD_ acpivideo2 at acpi0: VID2 cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2535, 2534, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 drm0 at inteldrm0 "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 18 for native-PCI interrupt pciide0: channel 0 ignored (not responding; disabled or no drives?) pciide0: channel 1 ignored (not responding; disabled or no drives?) puc0 at pci0 dev 3 function 3 "Intel GM45 KT" rev 0x07: ports: 1 com com2 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo com2: probed fifo depth: 0 bytes em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:26:b9:97:c6:58 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 11 ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 12 iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:9c:53:36 ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 13 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci4 at ppb3 bus 3 cbb0 at pci4 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19 "Ricoh 5C832 Firewire" rev 0x04 at pci4 dev 1 function 1 not configured sdhc0 at pci4 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18 sdmmc0 at sdhc0 "Ricoh 5C843 MMC" rev 0x11 at pci4 dev 1 function 3 not configured cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2561GS, MF00> SCSI3 0/direct fixed naa.500003934168383a sd0: 238475MB, 512 bytes/sector, 488397168 sectors cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633F, D500> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: ALPS Dualpoint, version 0x6222 wsmouse1 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 6 configuration 1 interface 0 "M092S-R00-9C09-SB0EX Integrated_Webcam_2M" rev 2.00/94.10 addr 2 video0 at uvideo0 uhub8 at uhub2 port 1 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "Dell product 0x8157" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1, 1 report id ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub8 port 2 configuration 1 interface 0 "Dell product 0x8158" rev 2.00/1.00 addr 4 uhidev1: iclass 3/1, 125 report ids ums0 at uhidev1 reportid 2: 3 buttons wsmouse2 at ums0 mux 0 uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0 ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (197cec1763d5396a.a) swap on sd0b dump on sd0b
