I have a beaglebone (AM3359) running OpenBSD, see below.
Is there any interest in such code?
OpenBSD/beagle booting ...
arg0 0x0 arg1 0xe05 arg2 0x80000100
atag core flags 0 pagesize 0 rootdev 0
atag mem start 0x80000000 size 0x10000000
atag cmdline [sd0]
bootfile: sd0
bootargs:
memory size derived from u-boot
bootconf.mem[0].address = 80000000 pages 65536/0x10000000
Allocating page tables
freestart = 0x00621000, free_pages = 530911 (0x000819df)
IRQ stack: p0x81fd1000 v0xc1fd1000
ABT stack: p0x81fd0000 v0xc1fd0000
UND stack: p0x81fcf000 v0xc1fcf000
SVC stack: p0x81fcd000 v0xc1fcd000
Creating L1 page table at 0x81ffc000
Mapping kernel
Constructing L2 page tables
undefined page pmap [ no symbol table formats found ]
board type: beaglebone
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-current (GENERIC) #0: Thu Apr 25 10:51:58 MDT 2013
[email protected]:/usr/src/sys/arch/beagle/compile/GENERIC
real mem = 268435456 (256MB)
avail mem = 255819776 (243MB)
mainbus0 at root
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0: BeagleBone
prcm0 at omap0 rev 0.2
intc0 at omap0 rev 5.0
dmtimer0 at omap0 rev 0.1
dmtimer1 at omap0 rev 0.1
omdog0 at omap0 rev 0.1
ommmc0 at omap0 rev 3.1
sdmmc0 at ommmc0
com0 at omap0: ti16750, 64 byte fifo
com0: console
/dev/ksyms: Symbol table not valid.
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 7580MB, 512 bytes/sector, 15523840 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sd0
root on sd0a (2579d6d61b20ccb7.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
setting tty flags
pf enabled
ddb.console: 0 -> 1
starting network
starting early daemons: syslogd pflogd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
kvm_mkdb: can't open /dev/ksyms
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail inetd sndiod.
starting local daemons: cron.
Thu Apr 25 11:02:09 MDT 2013
OpenBSD/beagle (noname.my.domain) (console)
login:
