On 29 May 2013 09:35, David Gwynne <d...@openbsd.org> wrote: > ive tested this on: > > bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1 > (0x4201): apic 0 int 16, address 00:18:f3:d1:80:64 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > > bge1 at pci5 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 > (0x5720000), APE firmware NCSI 1.0.85.0: apic 0 int 16, address > d4:ae:52:a7:05:38 > brgphy1 at bge1 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0 > bge2 at pci5 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 > (0x5720000), APE firmware NCSI 1.0.85.0: apic 0 int 17, address > d4:ae:52:a7:05:39 > brgphy2 at bge2 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0 > > bge0 at pci3 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x795, address 00:14:4f:a9:34:90 > brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci3 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:a9:34:91 > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > > bge2 at pci7 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719 > (0x5719001), APE firmware NCSI 1.0.60.0: ivec 0x795, address 00:10:18:e5:e1:b8 > brgphy2 at bge2 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0 > bge3 at pci7 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719 > (0x5719001), APE firmware NCSI 1.0.60.0: ivec 0x796, address 00:10:18:e5:e1:b9 > brgphy3 at bge3 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0 > bge4 at pci7 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719 > (0x5719001), APE firmware NCSI 1.0.60.0: ivec 0x795, address 00:10:18:e5:e1:ba > brgphy4 at bge4 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0 > bge5 at pci7 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719 > (0x5719001), APE firmware NCSI 1.0.60.0: ivec 0x796, address 00:10:18:e5:e1:bb > brgphy5 at bge5 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0 > bge6 at pci13 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x7d6, address 00:14:4f:a9:34:92 > > working fine on each of them. >
cool, thanks! does your 5719 work w/o other diffs? > makes sense to me. ok. >
