Dear Listmembers.
After reading a lot about 802.1x authentication I hope you can help me
to clarify some open questions.
1.) When I have more then one Certificate is a radius server mandatory?
2.) I think that the freeradius server is the server I will use, any
objections for this SW?
3.) Have anybody used this setup and have some hints and tips to avoid
pitfalls
Thank you for your help.
Best regards
Aleks
Some Links I have read.
http://undeadly.org/cgi?action=article&sid=20130128142215
http://hostap.epitest.fi/wpa_supplicant/
http://wiki.freeradius.org/protocol/EAP#EAP-TLS
http://www.openbsd.org/cgi-bin/man.cgi?query=ifconfig&apropos=0&sektion=0&manpath=OpenBSD+Current&arch=i386&format=html
####
wpaakms akm,akm,...
Set the comma-separated list of allowed authentication and
key
management protocols.
The supported values are ``psk'' and ``802.1x''. psk
authentication (also known as personal mode) uses a 256-bit
pre-
shared key. 802.1x authentication (also known as
enterprise
mode) is used with an external IEEE 802.1X authentication
server,
such as wpa_supplicant. The default value is ``psk''.
``psk''
can only be used if a pre-shared key is configured using
the
wpakey option.
####
