Hi,
On Fri, Jan 24, 2014 at 11:00:32PM +0000, peb.nowa...@bluewin.ch wrote:
> I was working on the asmc kernel driver for the Macbooks. I have a
> MBPro8.2 (mid 2011), and came to get the driver installed, reading all
> sensors and temperatures into the "hw.sensors" framework.
> See
> attached diffs. Beginning line 30 I describe the ideas for the driver.
> Further information available, also a "todo list". Thx to Joshua@, who
> helped me to create the diffs below, and provided input for the "todo
> list". Looking forward to get some feedback, especially on other Apple
> hardware.
I tested this on my MacBook Air 4,2 and got the following in dmesg:
ASMC_MATCH
BIOS: vendor Apple Inc., product MacBookAir4,2
** ERROR: no model found for MacBookAir4,2
Hence, I added "blindly" the following asmc_model line to your diff:
+ { "MacBookAir4,2", 3, 0, 0, 63, 511, 10 },
With this line I got the following in sysctl output:
hw.sensors.applesmc.fan0=1992 RPM (fan0_speed)
hw.sensors.applesmc.fan1=0 RPM (fan1_speed), UNKNOWN
hw.sensors.applesmc.fan2=2000 RPM (fan0_targetspeed)
hw.sensors.applesmc.fan3=0 RPM (fan1_targetspeed), UNKNOWN
hw.sensors.applesmc.fan4=0 RPM (fan0_safespeed), UNKNOWN
hw.sensors.applesmc.fan5=0 RPM (fan1_safespeed), UNKNOWN
hw.sensors.applesmc.fan6=2000 RPM (fan0_minspeed)
hw.sensors.applesmc.fan7=0 RPM (fan1_minspeed), UNKNOWN
hw.sensors.applesmc.fan8=6500 RPM (fan0_maxspeed)
hw.sensors.applesmc.fan9=0 RPM (fan1_maxspeed), UNKNOWN
hw.sensors.applesmc.raw0=36 (Enclosure Bottom)
hw.sensors.applesmc.raw1=76 (CPU Temperature Diode)
hw.sensors.applesmc.illuminance0=0.00 lx (lightright)
hw.sensors.applesmc.illuminance1=0.00 lx (lightleft)
hw.sensors.applesmc.acceleration0=0.0000 m/s^2 (sms_x), UNKNOWN
hw.sensors.applesmc.acceleration1=0.0000 m/s^2 (sms_y), UNKNOWN
hw.sensors.applesmc.acceleration2=0.0000 m/s^2 (sms_z), UNKNOWN
Since, it works only "partially", I guess the asmc_model line requires
further tweaking? Anything else I can test?
Whole dmesg follows below.
Thanks,
Regards,
Joerg
OpenBSD 5.5-beta (GENERIC.MP) #1: Sun Feb 2 13:14:43 CET 2014
r...@marvin.hq.umaxx.net:/usr/src_apple/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error cf<clock_battery,ROM_cksum,fixed_disk,invalid_time>
real mem = 4185079808 (3991MB)
avail mem = 4065439744 (3877MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (53 entries)
bios0: vendor Apple Inc. version "MBA41.88Z.0077.B0F.1201241549" date 01/24/2012
bios0: Apple Inc. MacBookAir4,2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
SSDT MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) EC__(S4) HDEF(S4) ARPT(S4) RP02(S4) EHC1(S3)
EHC2(S3) ADP1(S4) LID0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz, 1800.30 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz, 1800.02 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz, 1800.02 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz, 1800.02 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiec0 at acpi0
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-151
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P2)
acpiprt2 at acpi0: bus 2 (RP02)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibat0 at acpi0: BAT0 model "3545797981023400290" type 3545797981528607052
oem "3545797981528673619"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: IGPU
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1800 MHz: speeds: 1801, 1800, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800 MHz
memory map conflict 0xe00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xffed0000/0x30000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 3
ppb1 at pci1 dev 0 function 0 vendor "Intel", unknown product 0x151a rev 0x01
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 vendor "Intel", unknown product 0x151a rev 0x01
pci3 at ppb2 bus 5
vendor "Intel", unknown product 0x151a (class system subclass miscellaneous,
rev 0x01) at pci3 dev 0 function 0 not configured
ppb3 at pci2 dev 3 function 0 vendor "Intel", unknown product 0x151a rev 0x01
pci4 at ppb3 bus 6
ppb4 at pci2 dev 4 function 0 vendor "Intel", unknown product 0x151a rev 0x01
pci5 at ppb4 bus 55
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0x90000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1440x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
uhci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x1c2c rev
0x05: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 6 Series USB" rev 0x05: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: Cirrus Logic CS4206, Intel/0x2805, using Cirrus Logic CS4206
audio0 at azalia0
ppb5 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci6 at ppb5 bus 1
ppb6 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi
pci7 at ppb6 bus 2
"Broadcom BCM43224" rev 0x01 at pci7 dev 0 function 0 not configured
uhci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x1c27 rev
0x05: apic 2 int 19
ehci1 at pci0 dev 29 function 7 "Intel 6 Series USB" rev 0x05: apic 2 int 22
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QS67 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x05: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <APPLE SSD SM256C>
wd0: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x2c 03=fc 05=6f 06=a0 71=06 72=80 86=89 90=37 91=21 92=25 93=3d
94=62 95=8c 96=6a 97=87 98=3d 99=1d 9a=9d 9f=7c a0=7f a1=b5 a2=bf a3=7b a4=28
a5=cf a6=64 a7=2d words 00=0000 01=0000 02=00fc 03=fc00 04=006f 05=6fa0 06=a000
07=0000
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ASMC_MATCH
BIOS: vendor Apple Inc., product MacBookAir4,2
asmc_models[13]=MacBookAir4,2;asmc0 at isa0 port 0x300/1638 irq 6
ASMC_ATTACH
ASMC_INIT
** ASMC_NKEYS
* number of keys = 106
** ASMC_FANCOUNT
* FANCOUNT=1
ASMC_GET_SENSORS
ASMC_UPDATE_SENSORS
** TEMPERATURES
** TB0T, enclosure, Enclosure Bottom
* TB0T = 36, sensor_number=1
** TC0D, cpu, CPU Temperature Diode
* TC0D = 76, sensor_number=2
** REG-SENSORS
** MO_X, sms_x, sms_x
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating SMS sensor MO_X.
* MO_X = 0, sensor_number=3
** MO_Y, sms_y, sms_y
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating SMS sensor MO_Y.
* MO_Y = 0, sensor_number=4
** MO_Z, sms_z, sms_z
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating SMS sensor MO_Z.
* MO_Z = 0, sensor_number=5
** F0Ac, fan0, fan0_speed
* F0Ac = 1992, sensor_number=6
** F1Ac, fan1, fan1_speed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating FAN sensor F1Ac.
* F1Ac = 0, sensor_number=7
** F0Tg, fan0, fan0_targetspeed
* F0Tg = 2000, sensor_number=8
** F1Tg, fan1, fan1_targetspeed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating FAN sensor F1Tg.
* F1Tg = 0, sensor_number=9
** ALV0, lightright, lightright
* ALV0 = 0, sensor_number=10
** ALV1, lightleft, lightleft
* ALV1 = 0, sensor_number=11
** IRREG-SENSORS, Status = 1
** F0Sf, fan0, fan0_safespeed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating sensor F0Sf.
* F0Sf = 0, sensor_number=12
** F1Sf, fan1, fan1_safespeed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating sensor F1Sf.
* F1Sf = 0, sensor_number=13
** F0Mn, fan0, fan0_minspeed
* F0Mn = 2000, sensor_number=14
** F1Mn, fan1, fan1_minspeed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating sensor F1Mn.
* F1Mn = 0, sensor_number=15
** F0Mx, fan0, fan0_maxspeed
* F0Mx = 6500, sensor_number=16
** F1Mx, fan1, fan1_maxspeed
*** wait status failed: status 0x00 != expected value 0x0c
*** Error getting result for 0x02
** Error updating sensor F1Mx.
* F1Mx = 0, sensor_number=17
nvram: invalid checksum
uhub4 at uhub0 port 1 "Standard Microsystems Hub" rev 2.00/b.b3 addr 2
uhub5 at uhub4 port 1 "Apple Inc. BRCM20702 Hub" rev 2.00/1.00 addr 3
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Apple Computer product
0x820a" rev 2.00/1.00 addr 4
uhidev0: iclass 3/1, 1 report id
ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "Apple Computer product
0x820b" rev 2.00/1.00 addr 5
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
ugen0 at uhub5 port 3 "Apple Inc. Bluetooth USB Host Controller" rev 2.00/1.00
addr 6
uhidev2 at uhub4 port 2 configuration 1 interface 0 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/2.09 addr 7
uhidev2: iclass 3/1, 9 report ids
ukbd1 at uhidev2 reportid 1: 8 variable keys, 6 key codes, country code 13
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev2 reportid 9: input=0, output=0, feature=3
uhidev3 at uhub4 port 2 configuration 1 interface 1 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/2.09 addr 7
uhidev3: iclass 3/0, 68 report ids
uhid1 at uhidev3 reportid 68: input=511, output=0, feature=0
uhidev4 at uhub4 port 2 configuration 1 interface 2 "Apple Inc. Apple Internal
Keyboard / Trackpad" rev 2.00/2.09 addr 7
uhidev4: iclass 3/1, 2 report ids
ums1 at uhidev4 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
run0 at uhub4 port 3 "Linksys Linksys WUSB600N Wireless-N USB Network Adapter
with Dual-Band ver. 2" rev 2.00/1.01 addr 8
run0: MAC/BBP RT3572 (rev 0x0221), RF RT3052 (MIMO 2T2R), address
68:7f:74:82:e6:f1
uvideo0 at uhub0 port 2 configuration 1 interface 0 "Apple Inc. FaceTime Camera
(Built-in)" rev 2.00/6.46 addr 9
video0 at uvideo0
ugen1 at uhub0 port 2 configuration 1 "Apple Inc. FaceTime Camera (Built-in)"
rev 2.00/6.46 addr 9
uhub6 at uhub1 port 1 "Standard Microsystems Hub" rev 2.00/b.b3 addr 2
umass0 at uhub6 port 1 configuration 1 interface 0 "Apple Card Reader" rev
2.00/3.10 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <APPLE, SD Card Reader, 2.00> SCSI0 0/direct
removable serial.05ac8404000000000310
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (e9265d7af45791f2.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
