On 21 February 2014 23:31, Rod Whitworth <glis...@witworx.com> wrote: > I can see why this one goes unnoticed. > > When I grab a snapshot and install on a test machine I make a practice > of deleting the k partition because I don't need it and it takes ages > to newfs it. (Slow Atom box) > > Today it caught me. Going through the usual accept defaults (as much as > possible) I hit enter to leave the whole disk for OpenBSD and then > chose E when the partition choices came up. > entered "d k <cr>" > then "q <cr> > "Write new label? [y]" appeared and as usual I hit <cr> > To my surprise I was looking at the fdisk choices section again. > > What I missed at first was the Segmentation fault message crammed in > between the partition stuff and the fdisk stuff. > > So I just left the k partition in and all went well. > > Completely repeatable.
Indeed. The 'q' then 'y' seem to be the key. If I say 'w', 'q' (which is my habitual exiting technique) then there does not seem to be a seg fault. Likely fallout from the tweaking of mount point code I did a few days ago. .... Ken > > dmesg: > > > OpenBSD 5.5-beta (GENERIC.MP) #237: Tue Feb 18 16:19:26 MST 2014 > t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) > 1.80 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF > real mem = 2137223168 (2038MB) > avail mem = 2090397696 (1993MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 06/23/11, BIOS32 rev. 0 @ > 0xf0010, SMBIOS rev. 2.6 @ 0xfc8b0 (23 entries) > bios0: vendor American Megatrends Inc. version "080015" date 06/23/2011 > bios0: Standard XS35 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET GSCI > acpi0: wakeup devices P0P1(S4) AZAL(S3) P0P4(S4) P0P5(S4) JLAN(S3) > P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) > EUSB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 199MHz > cpu0: mwait min=64, max=64, C-substates=0.1.0.0.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) > 1.80 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) > 1.80 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz ("GenuineIntel" 686-class) > 1.80 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAI > T,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 3, remapped to apid 4 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 3 (P0P1) > acpiprt2 at acpi0: bus 1 (P0P4) > acpiprt3 at acpi0: bus 2 (P0P5) > acpiprt4 at acpi0: bus -1 (P0P6) > acpiprt5 at acpi0: bus -1 (P0P7) > acpiprt6 at acpi0: bus -1 (P0P8) > acpiprt7 at acpi0: bus -1 (P0P9) > acpiec0 at acpi0 > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpitz0 at acpi0: critical temperature is 104 degC > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: LCD_ > bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1800! 0xcf800/0x1000 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > 0:31:2: mem address conflict 0xfc00/0x400 > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1024x768 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: > msi > azalia0: codecs: IDT 92HD81B1X > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 > int 16 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 > int 17 > pci2 at ppb1 bus 2 > "JMicron SD/MMC" rev 0x80 at pci2 dev 0 function 0 not configured > sdhc0 at pci2 dev 0 function 2 "JMicron SD Host Controller" rev 0x80: > apic 4 int 18 > sdmmc0 at sdhc0 > "JMicron Memory Stick" rev 0x80 at pci2 dev 0 function 3 not configured > jme0 at pci2 dev 0 function 5 "JMicron JMC250" rev 0x03: msi, address > 80:ee:73:28:4b:69 > jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 > int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 > int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 > int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 > int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 > int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 > pciide0 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x02: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 4 int 19 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVT-00A23T0> > wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SN-208AB, TC00> ATAPI > 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic > 4 int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > uhidev0 at uhub2 port 2 configuration 1 interface 0 "vendor 0x0b38 > product 0x0010" rev 1.10/1.02 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub2 port 2 configuration 1 interface 1 "vendor 0x0b38 > product 0x0010" rev 1.10/1.02 addr 2 > uhidev1: iclass 3/0, 2 report ids > uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhidev2 at uhub3 port 2 configuration 1 interface 0 "Holtek product > 0x1400" rev 1.10/1.43 addr 2 > uhidev2: iclass 3/1 > ukbd1 at uhidev2: 8 variable keys, 6 key codes > wskbd2 at ukbd1 mux 1 > wskbd2: connecting to wsdisplay0 > uhidev3 at uhub3 port 2 configuration 1 interface 1 "Holtek product > 0x1400" rev 1.10/1.43 addr 2 > uhidev3: iclass 3/1, 3 report ids > ums0 at uhidev3 reportid 1: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev3 reportid 2: input=3, output=0, feature=0 > uhid3 at uhidev3 reportid 3: input=1, output=0, feature=0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (ecb2206223e5a47f.a) swap on wd0b dump on wd0b > <EOF> > *** NOTE *** Please DO NOT CC me. I <am> subscribed to the list. > Mail to the sender address that does not originate at the list server is > tarpitted. The reply-to: address is provided for those who feel compelled to > reply off list. Thankyou. > > Rod/ > --- > This life is not the real thing. > It is not even in Beta. > If it was, then OpenBSD would already have a man page for it. > >