On Tue, Mar 18, 2014 at 12:39 PM, Chris Cappuccio <ch...@nmedia.net> wrote:
> sven falempin [sven.falem...@gmail.com] wrote: > > Some issue here, using install55.fs (today 18/3/2014 downloaded snaps) > > > > boot is ok (warn: entropy file missing) > > > > but /dev has no /dev/sd1 (is the usb key) and so i cannot look for the > sets . > > > > I did MAKEDEV all so i can mount keys to get the dmesg. > > > > The install script will create the devices on demand, as needed to mount > the source sets > the installer proposed http and i was not able <to go> to the right disk > > > currently outputing dmesg on usb3 key, the machine has no plug for the > > com port, no idea how to get the boot infos (i am bad at soldering) > > > > I fdisk the key, but i cannot disklabel it ( out of inode.... ) > > > > This is because you ran MAKEDEV all, the ramdisk has only minimal inodes > available > -- --------------------------------------------------------------------------------------------------------------------- () ascii ribbon campaign - against html e-mail /\