It's the pms(4) driver. It happens on some Dell laptops that have a
crappy
non fully standard synaptics (alps?) touchpad.
It seems so, today this laptop booted up without pms device for some
reason,
and without it X.org started up instantly.
Try to disable pms:
# config -e -f /bsd
UKC>disable pms
And see if you can reproduce the problem.
I can, after disabling pms device, X.org starts just fine.
dmesg:
OpenBSD 5.5-current (GENERIC.MP) #74: Sun Apr 20 04:16:25 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 30<config_unit,memory_size>
real mem = 4133875712 (3942MB)
avail mem = 4015112192 (3829MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf2450 (66 entries)
bios0: vendor Dell Inc. version "A14" date 12/05/2013
bios0: Dell Inc. Latitude E4310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SLIC SSDT
acpi0: wakeup devices AGP_(S4) P0P1(S4) UAR1(S3) HDEF(S4) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz, 2926.51 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz, 2926.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 3 (P0P1)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus 2 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG3)
acpiprt11 at acpi0: bus -1 (PEG5)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL PXD3611" serial 36834 type LION oem
"Samsung SDI"
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2667, 2666, 2533, 2399, 2266,
2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x05: msi, address
5c:26:0a:3e:bd:bc
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel QS57 HD Audio" rev 0x05: msi
azalia0: codecs: IDT 92HD81B1X, Intel/0x2804, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
sdhc0 at pci2 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 2 int
18
sdmmc0 at sdhc0
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel QS57 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI
1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, APPLE SSD TS256C, CJAA> SCSI3
0/direct fixed t10.ATA_APPLE_SSD_TS256C_92CA4142K8HK
sd0: 239372MB, 512 bytes/sector, 490234752 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2
int 18
iic0 at ichiic0
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci4 at mainbus0 bus 63
pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (324da3c338d25af9.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct
fixed
sd1: 216453MB, 512 bytes/sector, 443297008 sectors
in6_purgeaddr: failed to remove a route to the p2p destination:
2001:16d8:ff00:35e::2 on tun0, errno=3
syncing disks... done
sd1 detached
rebooting...
OpenBSD 5.5-current (GENERIC.MP) #74: Sun Apr 20 04:16:25 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 30<config_unit,memory_size>
real mem = 4133875712 (3942MB)
avail mem = 4015112192 (3829MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf2450 (66 entries)
bios0: vendor Dell Inc. version "A14" date 12/05/2013
bios0: Dell Inc. Latitude E4310
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SLIC SSDT
acpi0: wakeup devices AGP_(S4) P0P1(S4) UAR1(S3) HDEF(S4) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz, 2926.58 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz, 2926.02 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 3 (P0P1)
acpiprt3 at acpi0: bus 1 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus 2 (RP03)
acpiprt6 at acpi0: bus -1 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG3)
acpiprt11 at acpi0: bus -1 (PEG5)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL PXD3611" serial 36834 type LION oem
"Samsung SDI"
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 2926 MHz: speeds: 2667, 2666, 2533, 2399, 2266,
2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x05: msi, address
5c:26:0a:3e:bd:bc
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel QS57 HD Audio" rev 0x05: msi
azalia0: codecs: IDT 92HD81B1X, Intel/0x2804, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
sdhc0 at pci2 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x01: apic 2 int
18
sdmmc0 at sdhc0
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel QS57 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI
1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, APPLE SSD TS256C, CJAA> SCSI3
0/direct fixed t10.ATA_APPLE_SSD_TS256C_92CA4142K8HK
sd0: 239372MB, 512 bytes/sector, 490234752 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2
int 18
iic0 at ichiic0
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci4 at mainbus0 bus 63
pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (324da3c338d25af9.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct
fixed
sd1: 216453MB, 512 bytes/sector, 443297008 sectors
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
pckbcintr: no dev for slot 1
Xorg.0.log:
[ 92.924] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 92.925] linear framebuffer access unavailable
[ 92.940] (--) Using wscons driver on /dev/ttyC4 in pcvt
compatibility mode (version 3.32)
[ 92.965]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 92.965] X Protocol Version 11, Revision 0
[ 92.965] Build Operating System: OpenBSD 5.5 amd64
[ 92.966] Current Operating System: OpenBSD puffs.courier.lv 5.5
GENERIC.MP#74 amd64
[ 92.966] Build Date: 20 April 2014 07:23:14AM
[ 92.966]
[ 92.966] Current version of pixman: 0.32.4
[ 92.966] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 92.966] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 92.967] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 22
14:20:38 2014
[ 92.967] (==) Using config file: "/etc/X11/xorg.conf"
[ 92.967] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 92.967] (==) No Layout section. Using the first Screen section.
[ 92.967] (==) No screen section available. Using defaults.
[ 92.967] (**) |-->Screen "Default Screen Section" (0)
[ 92.967] (**) | |-->Monitor "<default monitor>"
[ 92.968] (==) No monitor specified for screen "Default Screen
Section".
Using a default monitor configuration.
[ 92.968] (==) Disabling SIGIO handlers for input devices
[ 92.968] (==) Automatically adding devices
[ 92.968] (==) Automatically enabling devices
[ 92.968] (==) Not automatically adding GPU devices
[ 92.968] (**) FontPath set to:
/usr/local/lib/X11/fonts/artwiz-aleczapka/,
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 92.968] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 92.968] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 92.968] (II) Loader magic: 0x1891b7eff040
[ 92.968] (II) Module ABI versions:
[ 92.968] X.Org ANSI C Emulation: 0.4
[ 92.968] X.Org Video Driver: 14.1
[ 92.968] X.Org XInput driver : 19.1
[ 92.968] X.Org Server Extension : 7.0
[ 92.968] (--) PCI:*(0:0:2:0) 8086:0046:1028:0410 rev 2
[ 92.968] Initializing built-in extension Generic Event Extension
[ 92.968] Initializing built-in extension SHAPE
[ 92.968] Initializing built-in extension MIT-SHM
[ 92.968] Initializing built-in extension XInputExtension
[ 92.968] Initializing built-in extension XTEST
[ 92.968] Initializing built-in extension BIG-REQUESTS
[ 92.968] Initializing built-in extension SYNC
[ 92.968] Initializing built-in extension XKEYBOARD
[ 92.968] Initializing built-in extension XC-MISC
[ 92.969] Initializing built-in extension SECURITY
[ 92.969] Initializing built-in extension XINERAMA
[ 92.969] Initializing built-in extension XFIXES
[ 92.969] Initializing built-in extension RENDER
[ 92.969] Initializing built-in extension RANDR
[ 92.969] Initializing built-in extension COMPOSITE
[ 92.969] Initializing built-in extension DAMAGE
[ 92.969] Initializing built-in extension MIT-SCREEN-SAVER
[ 92.969] Initializing built-in extension DOUBLE-BUFFER
[ 92.969] Initializing built-in extension RECORD
[ 92.969] Initializing built-in extension DPMS
[ 92.969] Initializing built-in extension X-Resource
[ 92.969] Initializing built-in extension XVideo
[ 92.969] Initializing built-in extension XVideo-MotionCompensation
[ 92.969] Initializing built-in extension XFree86-VidModeExtension
[ 92.969] Initializing built-in extension XFree86-DGA
[ 92.969] Initializing built-in extension XFree86-DRI
[ 92.969] Initializing built-in extension DRI2
[ 92.969] (II) LoadModule: "glx"
[ 92.971] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 92.971] (II) Module glx: vendor="X.Org Foundation"
[ 92.971] compiled for 1.14.5, module version = 1.0.0
[ 92.971] ABI class: X.Org Server Extension, version 7.0
[ 92.971] (==) AIGLX enabled
[ 92.971] Loading extension GLX
[ 92.971] (==) Matched intel as autoconfigured driver 0
[ 92.971] (==) Matched vesa as autoconfigured driver 1
[ 92.971] (==) Assigned the driver to the xf86ConfigLayout
[ 92.971] (II) LoadModule: "intel"
[ 92.972] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 92.974] (II) Module intel: vendor="X.Org Foundation"
[ 92.974] compiled for 1.14.5, module version = 2.99.910
[ 92.974] Module class: X.Org Video Driver
[ 92.974] ABI class: X.Org Video Driver, version 14.1
[ 92.974] (II) LoadModule: "vesa"
[ 92.975] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 92.975] (II) Module vesa: vendor="X.Org Foundation"
[ 92.975] compiled for 1.14.5, module version = 2.3.3
[ 92.975] Module class: X.Org Video Driver
[ 92.975] ABI class: X.Org Video Driver, version 14.1
[ 92.975] (II) intel: Driver for Intel(R) Integrated Graphics
Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 92.975] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 92.975] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 92.975] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 92.975] (II) VESA: driver for VESA chipsets: vesa
[ 92.976] (WW) Falling back to old probe method for vesa
[ 92.978] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics
[ 92.978] (--) intel(0): CPU: x86-64
[ 92.978] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 92.978] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 92.978] (==) intel(0): RGB weight 888
[ 92.978] (==) intel(0): Default visual is TrueColor
[ 92.979] (**) intel(0): Framebuffer tiled
[ 92.979] (**) intel(0): Pixmaps tiled
[ 92.979] (**) intel(0): "Tear free" disabled
[ 92.979] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 92.979] (II) intel(0): Output eDP1 has no monitor section
[ 92.979] (II) intel(0): Output VGA1 has no monitor section
[ 92.980] (II) intel(0): Output HDMI1 has no monitor section
[ 92.980] (II) intel(0): Output DP1 has no monitor section
[ 92.980] (II) intel(0): Output HDMI2 has no monitor section
[ 92.980] (II) intel(0): Output DP2 has no monitor section
[ 92.980] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 92.980] (--) intel(0): Output eDP1 using initial mode 1366x768 on
pipe 0
[ 92.980] (==) intel(0): DPI set to (96, 96)
[ 92.980] (II) Loading sub module "dri2"
[ 92.980] (II) LoadModule: "dri2"
[ 92.980] (II) Module "dri2" already built-in
[ 92.980] (II) UnloadModule: "vesa"
[ 92.980] (II) Unloading vesa
[ 92.980] (==) Depth 24 pixmap format is 32 bpp
[ 92.981] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 92.981] (==) intel(0): Backing store disabled
[ 92.981] (==) intel(0): Silken mouse disabled
[ 92.981] (II) intel(0): HW Cursor enabled
[ 92.981] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 92.981] (==) intel(0): DPMS enabled
[ 92.982] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 92.982] (II) intel(0): [DRI2] Setup complete
[ 92.982] (II) intel(0): [DRI2] DRI driver: i965
[ 92.982] (II) intel(0): [DRI2] VDPAU driver: i965
[ 92.982] (II) intel(0): direct rendering: DRI2 Enabled
[ 92.982] (--) RandR disabled
[ 93.025] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 93.025] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 93.025] (II) AIGLX: enabled GLX_ARB_create_context
[ 93.025] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 93.025] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 93.025] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 93.025] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 93.025] (II) AIGLX: Loaded and initialized i965
[ 93.025] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 93.034] (II) intel(0): switch to mode 1366x768@60.2 on eDP1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 93.050] (II) intel(0): Setting screen physical size to 361 x 203
[ 93.255] (II) config/wscons: checking input device /dev/wskbd
[ 93.255] (II) wskbd: using layout us
[ 93.255] (II) LoadModule: "kbd"
[ 93.256] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 93.257] (II) Module kbd: vendor="X.Org Foundation"
[ 93.257] compiled for 1.14.5, module version = 1.8.0
[ 93.257] Module class: X.Org XInput Driver
[ 93.257] ABI class: X.Org XInput driver, version 19.1
[ 93.257] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 93.257] (**) /dev/wskbd: always reports core events
[ 93.257] (**) /dev/wskbd: always reports core events
[ 93.257] (**) Option "Protocol" "standard"
[ 93.257] (**) Option "XkbRules" "base"
[ 93.257] (**) Option "XkbModel" "pc105"
[ 93.257] (**) Option "XkbLayout" "us"
[ 93.257] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[ 93.259] (II) config/wscons: checking input device /dev/wsmouse
[ 93.259] (II) LoadModule: "ws"
[ 93.260] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 93.261] (II) Module ws: vendor="X.Org Foundation"
[ 93.261] compiled for 1.14.5, module version = 1.3.0
[ 93.261] Module class: X.Org XInput Driver
[ 93.261] ABI class: X.Org XInput driver, version 19.1
[ 93.261] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 93.261] (**) /dev/wsmouse: always reports core events
[ 93.261] (II) ws: /dev/wsmouse: debuglevel 0
[ 93.261] (**) Option "Device" "/dev/wsmouse"
[ 93.261] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 93.261] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 93.261] (**) ws: /dev/wsmouse: associated screen: 0
[ 93.261] (II) ws: /dev/wsmouse: minimum x position: 0
[ 93.261] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 93.261] (II) ws: /dev/wsmouse: minimum y position: 0
[ 93.261] (II) ws: /dev/wsmouse: maximum y position: 767
[ 93.261] (==) ws: /dev/wsmouse: Buttons: 7
[ 93.261] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 93.261] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 7)
[ 93.262] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 93.262] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 93.262] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 93.262] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 93.287] (II) intel(0): EDID vendor "LGD", prod id 589
[ 93.287] (II) intel(0): Printing DDC gathered Modelines:
[ 93.288] (II) intel(0): Modeline "1366x768"x0.0 75.50 1366 1414
1446 1581 768 771 777 793 +hsync -vsync (47.8 kHz eP)
[ 93.288] (II) intel(0): Modeline "1366x768"x0.0 50.30 1366 1414
1446 1576 768 771 777 793 +hsync -vsync (31.9 kHz e)
[ 99.456] (II) Server zapped. Shutting down.
[ 99.461] (II) UnloadModule: "ws"
[ 99.462] (II) UnloadModule: "kbd"
[ 99.508] (EE) Server terminated successfully (0). Closing log file.
--
Karlis
