On Wed, May 21, 2014 at 04:53:31PM -0400, Jean-Philippe Ouellet wrote: > > todd, can you put this in snaps so that we know if there's some fallout? > > I don't know if this is related or not, but running that snap I experienced > the following crash while trying to shut down: (which I've never had before) > > http://i.imgur.com/4YFzdv0.jpg > http://i.imgur.com/KR1hWtT.jpg > http://i.imgur.com/yjaMsW4.jpg > > Unfortunately I forgot to trace the other cpus :( > > Probably not terribly helpful, but I thought I'd send it just in case.
Likely unrelated. > > > hw.sensors.cpu0.temp0=52.00 degC > hw.sensors.cpu1.temp0=52.00 degC > hw.sensors.cpu2.temp0=52.00 degC > hw.sensors.cpu3.temp0=52.00 degC > hw.sensors.acpitz0.temp0=59.00 degC (zone temperature) > hw.sensors.acpibtn0.indicator0=On (lid open) > hw.sensors.acpibat0.volt0=14.80 VDC (voltage) > hw.sensors.acpibat0.volt1=16.40 VDC (current voltage) > hw.sensors.acpibat0.power0=0.00 W (rate) > hw.sensors.acpibat0.watthour0=40.49 Wh (last full capacity) > hw.sensors.acpibat0.watthour1=2.02 Wh (warning capacity) > hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity) > hw.sensors.acpibat0.watthour3=40.02 Wh (remaining capacity), OK > hw.sensors.acpibat0.raw0=0 (battery idle), OK > hw.sensors.acpiac0.indicator0=On (power supply) > hw.sensors.acpithinkpad0.fan0=3669 RPM > hw.sensors.softraid0.drive0=online (sd1), OK > > > OpenBSD 5.5-current (GENERIC.MP) #136: Mon May 19 09:40:42 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8255741952 (7873MB) > avail mem = 8027213824 (7655MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (69 entries) > bios0: vendor LENOVO version "G6ET96WW (2.56 )" date 04/29/2013 > bios0: LENOVO 3443CTO > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > ASF! UEFI UEFI POAT SSDT SSDT UEFI SSDT DBG2 > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) > EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1896.03 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.69 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.69 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.69 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpicpu0 at acpi0: C2, C1, PSS > acpicpu1 at acpi0: C2, C1, PSS > acpicpu2 at acpi0: C2, C1, PSS > acpicpu3 at acpi0: C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 200 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "45N1071" serial 695 type LiP oem "SMP" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > cpu0: Enhanced SpeedStep 1896 MHz: speeds: 2001, 2000, 1900, 1800, 1700, > 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1600x900 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 2 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16 > sdmmc0 at sdhc0 > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x96: msi, > MIMO 2T2R, MoW, address [foo] > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e56 rev > 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD5SG225, 10.0> SCSI3 0/direct > fixed naa.[foo] > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbdprobe: reset response 0x0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > ugen0 at uhub2 port 3 "Auth Biometric Coprocessor" rev 1.10/0.01 addr 3 > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > sd1: 242135MB, 512 bytes/sector, 495893892 sectors > root on sd1a ([foo].a) swap on sd1b dump on sd1b >
