Turning off USB 3.0 in the BIOS menu makes all USB ports work fine for
me.
On Sun, 1 Jun 2014 20:13:18 +0100, Edd Barrett wrote:
> Hi tech,
>
> I am having a problem with the USB ports on my x230t.
>
> The machine has three USB ports, two blue and one yellow. I'm assuming
> the blue ones are USBv3, although I am not sure. The blue ports do not
> appear to function under OpenBSD.
>
> I'm certain the hardware is good: the machine dual boots debian where the
> ports do work, and I also notice that the OpenBSD bootloader sees a USB
> flash drive in a blue port as a 'hd1'.
>
> The below dmesg shows the hardware configuration of the system running
> the newest snapshot.
>
> After boot, for each port I plugged in, and then unplugged a USB mouse. I
> then repeated the process with a USB flash drive. As you can see, the
> devices were only detected on one USB port: the yellow one. The devices work
> fine in that port.
>
> I'm not sure of the status of USB3 on OpenBSD, but the manual seems to
> suggest that we support it. Of course that says nothing for the support
> of the chipset in the machine.
>
>
> OpenBSD 5.5-current (GENERIC.MP) #161: Sat May 31 19:06:40 MDT 2014
> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16844521472 (16064MB)
> avail mem = 16387346432 (15628MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> bios0: vendor LENOVO version "GCET92WW (2.52 )" date 02/25/2013
> bios0: LENOVO 3437CTO
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT
> ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2
> acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
> EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.56 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 4 (EXP3)
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpicpu2 at acpi0: C2, C1, PSS
> acpicpu3 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 103 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "45N1177" serial 12140 type LION oem "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
> 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> intagp at vga1 not configured
> inteldrm0 at vga1
> drm0 at inteldrm0
> drm: Memory usable by graphics device = 2048M
> inteldrm0: 1366x768
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> 3c:97:0e:a5:02:69
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 2
> sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdmmc0 at sdhc0
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2200" rev 0xc4: msi,
> MIMO 2T2R, BGN, address 9c:4e:36:b8:f8:f8
> ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 4
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT240M50, MU02> SCSI3 0/direct
> fixed naa.500a0751093c44b5
> sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int
> 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> ugen0 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
> Ltd. Integrated Camera" rev 2.00/5.20 addr 4
> video0 at uvideo0
> uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhidev0 at uhub3 port 5 configuration 1 interface 0 "Tablet ISD-V4" rev
> 1.10/6.11 addr 3
> uhidev0: iclass 3/1, 2 report ids
> ums0 at uhidev0 reportid 1: 2 buttons
> wsmouse1 at ums0 mux 0
> ums1 at uhidev0 reportid 2: 3 buttons, tip, barrel, eraser
> wsmouse2 at ums1 mux 0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (a81068940d057f4c.a) swap on sd0b dump on sd0b
> uhidev1 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft
> IntelliMouse\M-. Optical" rev 1.10/1.21 addr 5
> uhidev1: iclass 3/1
> ums2 at uhidev1: 5 buttons, Z dir
> wsmouse3 at ums2 mux 0
> wsmouse3 detached
> ums2 detached
> uhidev1 detached
> umass0 at uhub2 port 2 configuration 1 interface 0 "Kingston DataTraveler
> 2.0" rev 2.00/1.00 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus4 at umass0: 2 targets, initiator 0
> sd1 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI2
> 0/direct removable serial.09511665BDB1595433FB
> sd1: 29984MB, 512 bytes/sector, 61408128 sectors
> sd1 detached
> scsibus4 detached
> umass0 detached
>
> --
> Best Regards
> Edd Barrett
>
> http://www.theunixzoo.co.uk
>
>
