On Fri, Sep 05, 2014 at 07:07:04AM -0600, Todd C. Miller wrote: > Years ago I bought a Promise TX2plus PCI card which is a two channel > SATAII board w/ one ATA channel that uses a PDC20775. It wasn't > supported at the time so it went on a shelf. The other day I tried > to get it working and found that while it is recognized, I get a > solid hang after fd0 if a drive is plugged in. By hard hang I mean > the reset button doesn't event work and I have to hold down the > power button for 10 seconds. > > Below is dmesg with no drives attached. At the end is dmesg from > a NetBSD boot CD which doesn't suffer from this problem. The > NetBSD pdcsata driver does some things that our pciide does not. > > Anyone have an idea better than just enabling the #if 0 debugging > in pdc205xx_drv_probe? I wonder if the presence of the ATA channel > is related to the issue. We don't seem to have any special handling > of that. > > - todd
Looks like you might need some changes from their rev 1.7 or 1.13?
