On Sat, Sep 27, 2014 at 4:42 AM, Abel Abraham Camarillo Ojeda <acam...@verlet.org> wrote: > On Thu, Sep 25, 2014 at 11:51 PM, Sébastien Marie > <semarie-open...@latrappe.fr> wrote: >> Hi, >> >> On Thu, Sep 25, 2014 at 06:18:11PM -0500, Abel Abraham Camarillo Ojeda wrote: >>> I have this usb dongle: >>> >>> http://www.tp-link.com/en/products/details/?model=tl-wn722n#over >>> >>> Tplink TL-WN722N, which according to driver (*.inf) is an atheros ar9271 >>> device. >>> >>> after inserting in usb slot I get: >>> >>> athn0 at uhub1 port 3 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2 >>> athn0: could not load firmware >>> >>> and nothing else happens, with it inserted I ran fw_update(1), and >>> then tried to remove it and insert it again, still same message. >>> >>> should it work? >> >> it should. I have the same device, and it works here (-current, but it >> works also in 5.5). > > > You are right, it seems that this card don't works _on this machine_, > I tried another OpenBSD/5.5/amd64-sp machine and it worked ok.
I have tried: on non-working machine: OpenBSD-current/amd64.mp: not works OpenBSD-5.5/i386.mp: not works on working machine: OpenBSD-5.5/amd64.sp: works >>> $ ls -alsh /etc/firmware >>> 140 -r--r--r-- 1 root bin 69.0K Jul 30 07:04 /etc/firmware/athn-ar7010 >>> 140 -r--r--r-- 1 root bin 69.0K Jul 30 07:04 /etc/firmware/athn-ar7010-11 >>> 104 -r--r--r-- 1 root bin 50.1K Jul 30 07:04 /etc/firmware/athn-ar9271 >>> 8 -r--r--r-- 1 root bin 2.2K Jul 30 07:04 /etc/firmware/athn-license >>> $ >> >> $ ls -alsh /etc/firmware/athn-* >> 140 -r--r--r-- 1 root bin 69.0K Jan 11 2014 /etc/firmware/athn-ar7010 >> 140 -r--r--r-- 1 root bin 69.0K Jan 11 2014 /etc/firmware/athn-ar7010-11 >> 104 -r--r--r-- 1 root bin 50.1K Jan 11 2014 /etc/firmware/athn-ar9271 >> 8 -r--r--r-- 1 root bin 2.2K Jan 11 2014 /etc/firmware/athn-license >> >> $ sha1 /etc/firmware/athn-* >> SHA1 (/etc/firmware/athn-ar7010) = 4712a8674f6d32b3d2bb548d304177a0fea09558 >> SHA1 (/etc/firmware/athn-ar7010-11) = >> 08d0587306e965cd7b04c0715114978395b5ac35 >> SHA1 (/etc/firmware/athn-ar9271) = 494bc6957da8f6d04d68f8594337fee356c190d3 >> SHA1 (/etc/firmware/athn-license) = 5fc3ee1bec135933fd8b1c73191e7d7556b9eed0 > > i have same files (same sha1) > >> $ pkg_info athn-firmware >> Information for inst:athn-firmware-1.1p1 >> [...] >> >> $ dmesg | grep athn >> athn0 at uhub0 port 4 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2 >> athn0: AR9271 rev 1 (1T1R), ROM rev 13, address c0:4a:00:1c:c0:aa >> >> -- >> Sébastien Marie > > I suspect this is an USB issue with this machine, will try to bisect > to see if it works on an previous release. (i have had problems with usb on > this machine): > > http://marc.info/?l=openbsd-cvs&m=139982602432291&w=2 > > Ideas? > > dmesg from working machine: > OpenBSD 5.5 (GENERIC) #271: Wed Mar 5 09:31:16 MST 2014 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1048051712 (999MB) > avail mem = 1011638272 (964MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06b0 (42 entries) > bios0: vendor American Megatrends Inc. version "0216" date 09/22/2009 > bios0: ASUSTeK Computer INC. ITX-220 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P9(S4) P0P8(S4) P0P7(S4) > P0P6(S4) P0P5(S4) P0P4(S4) PS2K(S4) PS2M(S4) UAR1(S4) USB2(S4) > USB3(S4) USB4(S4) MC97(S4) USB1(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Celeron(R) CPU 220 @ 1.20GHz, 1197.64 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF > cpu0: 512KB 64b/line 2-way L2 cache > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (P0P1) > acpiprt2 at acpi0: bus 1 (P0P3) > acpiprt3 at acpi0: bus -1 (P0P8) > acpicpu0 at acpi0 > aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > No connectors reported connected with modes > Cannot find any crtc or sizes - going 1024x768 > inteldrm0: 1024x768 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi > azalia0: codecs: VIA/0x4397 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 > pci1 at ppb0 bus 2 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 > (0x3800), msi, address bc:ae:c5:78:22:a7 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 17 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci2 at ppb1 bus 1 > re1 at pci2 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB > (0x1000), apic 1 int 17, address 00:08:54:a6:be:f6 > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 3 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 1 int 20 for native-PCI interrupt > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 1 int > 20 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290 > umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer > Glide" rev 2.00/1.26 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SanDisk, Cruzer Glide, 1.26> SCSI3 > 0/direct removable serial.07815575030407102515 > sd0: 3819MB, 512 bytes/sector, 7821312 sectors > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (1500e66415e6d349.a) swap on sd0b dump on sd0b > ucom0 detached > umodem0 detached > sd1 detached > scsibus1 detached > umass1 detached > ugen0 detached > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > ucom0 detached > umodem0 detached > sd1 detached > scsibus1 detached > umass1 detached > ugen0 detached > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > ucom0 detached > umodem0 detached > sd1 detached > scsibus1 detached > umass1 detached > ugen0 detached > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > ucom0 detached > umodem0 detached > sd1 detached > scsibus1 detached > umass1 detached > ugen0 detached > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > athn0 at uhub0 port 2 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 4 > athn0: failed loadfirmware of file athn-ar9271 (error 2) > athn0: could not load firmware > athn0 detached > athn0 at uhub0 port 2 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 4 > athn0: AR9271 rev 1 (1T1R), ROM rev 13, address f8:1a:67:2b:d3:40 > ucom0 detached > umodem0 detached > sd1 detached > scsibus1 detached > umass1 detached > ugen0 detached > athn0 detached > umodem0 at uhub0 port 6 configuration 1 interface 0 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umodem0: data interface 1, has no CM over data, has no break > umodem0: status change notification available > ucom0 at umodem0 > umass1 at uhub0 port 6 configuration 1 interface 4 "LG Electronics > Inc. LGE Android Phone" rev 2.00/2.27 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <LGE, Android Platform, 0100> SCSI2 > 0/direct removable serial.1004618e812041570173 > ugen0 at uhub0 port 6 configuration 1 "LG Electronics Inc. LGE Android > Phone" rev 2.00/2.27 addr 3 > > dmesg from non-working: > OpenBSD 5.6-current (GENERIC.MP) #390: Thu Sep 25 14:38:54 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17124114432 (16330MB) > avail mem = 16659537920 (15887MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeed90 (55 entries) > bios0: vendor American Megatrends Inc. version "1605" date 10/25/2012 > bios0: ASUSTeK COMPUTER INC. M5A97 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG HPET SSDT IVRS > acpi0: wakeup devices SBAZ(S4) PS2K(S3) PS2M(S3) UAR1(S4) P0PC(S4) > UHC1(S4) UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) > PE20(S4) PE21(S4) PE22(S4) PE23(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X4 955 Processor, 3211.10 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: AMD erratum 721 detected and fixed > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 200MHz > cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Phenom(tm) II X4 955 Processor, 3210.73 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu1: AMD erratum 721 detected and fixed > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD Phenom(tm) II X4 955 Processor, 3210.73 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu2: AMD erratum 721 detected and fixed > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD Phenom(tm) II X4 955 Processor, 3210.73 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache, 6MB 64b/line 48-way L3 cache > cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu3: AMD erratum 721 detected and fixed > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 21, 24 pins > ioapic1 at mainbus0: apid 6 pa 0xfec20000, version 21, 32 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P0PC) > acpiprt2 at acpi0: bus -1 (PE20) > acpiprt3 at acpi0: bus -1 (PE21) > acpiprt4 at acpi0: bus -1 (PE22) > acpiprt5 at acpi0: bus -1 (PE23) > acpiprt6 at acpi0: bus 1 (PC02) > acpiprt7 at acpi0: bus 2 (PC04) > acpiprt8 at acpi0: bus -1 (PC05) > acpiprt9 at acpi0: bus -1 (PC06) > acpiprt10 at acpi0: bus 3 (PC07) > acpiprt11 at acpi0: bus -1 (PC09) > acpiprt12 at acpi0: bus -1 (PC0A) > acpiprt13 at acpi0: bus -1 (PC0B) > acpiprt14 at acpi0: bus -1 (PC0C) > acpiprt15 at acpi0: bus -1 (PC0D) > acpiec0 at acpi0 > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpicpu2 at acpi0: PSS > acpicpu3 at acpi0: PSS > acpibtn0 at acpi0: PWRB > cpu0: 3211 MHz: speeds: 3200 2500 2100 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5a14 rev 0x02 > vendor "ATI", unknown product 0x5a23 (class system unknown subclass > 0x06, rev 0x00) at pci0 dev 0 function 2 not configured > ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility HD 5430" rev 0x00 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: msi > azalia0: no supported codecs > ppb1 at pci0 dev 4 function 0 "ATI SR5690 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: > RTL8168E/8111E-VL (0x2c80), msi, address c8:60:00:09:59:8e > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 > ppb2 at pci0 dev 7 function 0 "ATI SR5690 PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > "ASMedia ASM1042 xHCI" rev 0x00 at pci3 dev 0 function 0 not configured > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 5 int > 19, AHCI 1.2 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 4 lun 0: <ATA, ST3500413AS, JC45> SCSI3 0/direct > fixed naa.5000c5002dc5853f > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > sd1 at scsibus1 targ 5 lun 0: <ATA, ST3500413AS, JC4B> SCSI3 0/direct > fixed naa.5000c500355a1b53 > sd1: 476940MB, 512 bytes/sector, 976773168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 5 int > 18, version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 5 int > 20, version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 21 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling > iic0 at piixpm0 > iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 > 0a=00 0b=00 0c=00 0d=00 0e=22 0f=90 10=00 11=00 12=00 13=00 14=00 > 15=00 16=3d 17=a4 18=c0 19=88 1a=00 1b=00 1c=00 1d=00 1e=0c 1f=03 > 20=09 21=09 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 > 03=0000 04=0000 05=0000 06=0000 07=0000 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-10600 > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 5 int 16 > azalia1: codecs: Realtek/0x0887 > audio0 at azalia1 > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci4 at ppb3 bus 4 > ath0 at pci4 dev 5 function 0 "Atheros AR5212" rev 0x01: apic 5 int 20 > ath0: AR2414 7.9 phy 4.5 rf2413 5.6 eeprom 5.3, FCC2A*, address > 00:13:f7:cd:33:a3 > ral0 at pci4 dev 6 function 0 "Ralink RT2561" rev 0x00: apic 5 int 21, > address 00:80:5a:51:33:d4 > ral0: MAC/BBP RT2561C, RF RT2527 > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 5 int > 18, version 1.0, legacy support > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 5 int > 22, version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 5 int 23 > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0x290 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb6 at ohci3: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > athn0 at uhub0 port 3 "ATHEROS USB2.0 WLAN" rev 2.00/1.08 addr 2 > uhub7 at uhub4 port 1 "PI Engineering Kinesis Keyboard Hub" rev 1.10/3.20 > addr 2 > uhidev0 at uhub7 port 2 configuration 1 interface 0 "P.I. Engineering > product 0x0007" rev 1.10/3.20 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub7 port 2 configuration 1 interface 1 "P.I. Engineering > product 0x0007" rev 1.10/3.20 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed > sd2: 476937MB, 512 bytes/sector, 976767473 sectors > softraid0: volume sd2 is roaming, it used to be sd3, updating metadata > root on sd2a (a207e3a13f1838b4.a) swap on sd2b dump on sd2b > drm: initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1043:0x3000). > radeondrm0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) > radeondrm0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF > drm: probing gen 2 caps for device 0x1002:0x5a16 = 2/0 > drm: enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 > drm: PCIE GART of 512M enabled (table at 0x0000000000040000). > drm: Internal thermal controller without fan control > radeondrm0: 1920x1080 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > athn0: could not load firmware
