Hi, > Try this[1] kernel and have a look if it has the same issue or not.
Kernel did not started... U-Boot says checksum is ok, so maybe .umg file is not corrupted. Regards, -- SASANO Takayoshi <u...@mx5.nisiq.net> U-Boot SPL 2014.04-10694-g2ae8b32-dirty (Oct 01 2014 - 17:40:04) Board: Bananapi DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 spl: not an uImage at 1600 U-Boot 2014.04-10694-g2ae8b32-dirty (Oct 01 2014 - 17:40:04) Allwinner Technology CPU: Allwinner A20 (SUN7I) Board: Bananapi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: dwmac.1c50000 Hit any key to stop autoboot: 0 reading uEnv.txt 116 bytes read in 16 ms (6.8 KiB/s) Loaded environment from uEnv.txt Running uenvcmd ... reading bsd.umg 9584704 bytes read in 473 ms (19.3 MiB/s) ## Booting kernel from Legacy Image at 60000000 ... Image Name: boot Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 9584640 Bytes = 9.1 MiB Load Address: 40800000 Entry Point: 40800000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... (halt here)