yes, my scenario is:
Alix (i386) with vr0 and vr1.
vr0 connected to my ISP modem as always with:
cat /etc/hostname.vr0
dhcp
So far so go on boot time with #507 snapshot (Nov 13), after upgrade to
#572 (Dec 6 or 7th) the dhclient for vr0 start to fail something like
this:
pf enabled
net.inet.ip.forwarding: 0 -> 1
starting network
vr0: no link................................................... sleeping
Plus, after this, pf fail to load rules on each line with $ext_if (vr0)
so my gateway fails and no interwebz for gonzalo.
Doing some basic test with my setup found out that if I boot -s and do
dhclient vr0 works just fine, wihtout problems like always.
So far my workaround to this issue is:
cat /etc/hostname.vr0
dhcp
!/sbin/dhclient vr0
On Tue, Dec 09, 2014 at 02:12:20PM +0000, Stuart Henderson wrote:
; On 2014/12/09 08:37, David Higgs wrote:
; > Working and non-working dmesgs from the same VM below. Let me know if
; > any more info is needed. If this is already known, sorry for the
; > noise.
;
; gonzalo@ has seen similar on vr(4) starting recently, but the timing
; doesn't quite match yours.
;
; > # does not work
; > OpenBSD 5.6-current (RAMDISK_CD) #555: Tue Dec 9 00:50:21 MST 2014
;
; > # works fine
; > OpenBSD 5.6-current (GENERIC) #574: Mon Dec 8 15:39:56 MST 2014
;
; His old (working) kernel was i386 #507 snapshot (Nov 13) and he's seeing
; problems in #572 (Dec 6 or 7th) which is a bit earlier than yours.
;
; Might be a different cause, of course...
;
--
Sending from my toaster.
