This machine (server-ish hw used as a desktop) used to suspend and
resume nicely, but following the lidsuspend change no longer resumes
(machine powers up, screen stays black).
It works correctly if machdep.lidsuspend is set to 0. I can run like
that without a problem but it would be nicer to fix it, does anyone have
ideas where to poke?
Note: it has a LID0 device (unsure what it's connected to; there is a
chassis intrusion switch but operating that doesn't change the state
of acpibtn1.indicator0). It does not have a _LID method in the dsdt.
hw.sensors.cpu0.temp0=22.00 degC
hw.sensors.cpu1.temp0=22.00 degC
hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
hw.sensors.acpitz1.temp0=29.80 degC (zone temperature)
hw.sensors.acpibtn1.indicator0=On (lid open)
hw.sensors.sdtemp0.temp0=20.50 degC
hw.sensors.sdtemp1.temp0=21.00 degC
OpenBSD 5.7-beta (GENERIC.MP) #814: Thu Jan 22 15:39:30 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8477315072 (8084MB)
avail mem = 8247771136 (7865MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (90 entries)
bios0: vendor Dell Inc. version "A04" date 07/20/2014
bios0: Dell Inc. PowerEdge T20
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT
ASF!
acpi0: wakeup devices PS2K(S3) PS2M(S3) UAR1(S3) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4)
RP07(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, 2993.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,XSAVE,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,ERMS,INVPCID
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz, 2993.07 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,XSAVE,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,ERMS,INVPCID
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus -1 (PEG0)
acpiprt4 at acpi0: bus -1 (PEG1)
acpiprt5 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2900, 2700, 2600, 2400, 2300,
2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x06
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before
writing to 100000
inteldrm0: 1280x1024
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
f8:b1:56:b0:df:e7
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek/0x0280
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00
pci3 at ppb2 bus 3
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, VB0250EAVER, HPG7> SCSI3 0/direct fixed
naa.5000c50044a89843
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, ST3250410AS, 3.AA> SCSI3 0/direct fixed
t10.ATA_ST3250410AS_9RY26XS8
sd1: 238475MB, 512 bytes/sector, 488397168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: ts3000gb2
sdtemp1 at iic0 addr 0x1b: ts3000gb2
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhub4 at uhub3 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/85.36 addr 3
uhub5 at uhub4 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/85.36 addr 4
uhidev0 at uhub4 port 2 configuration 1 interface 0 "Microsoft Compact Optical
Mouse 500" rev 1.10/1.04 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub6 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhidev1 at uhub6 port 4 configuration 1 interface 0 "SILITEK product 0x0002"
rev 1.00/1.20 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub6 port 4 configuration 1 interface 1 "SILITEK USB Keyboard and
Mouse" rev 1.00/1.20 addr 3
uhidev2: iclass 3/0, 2 report ids
ums1 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7a56ec3821ae2ac4.a) swap on sd0b dump on sd0b
