Ah, just before that we have: ... softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (a81068940d057f4c.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted ehci_idone: ex=0xffffff041d0aaaf0 is done! umass0 at uhub3 port 2 configuration 1 interface 0 "Shuttle Technology product 0x0325" rev 1.10/5.15 addr 4 umass0: using SCSI over Bulk-Only scsibus4 at umass0: 2 targets, initiator 0 uvm_fault(0xffffffff818dc840, 0xffff800000000421, 0, 1) -> e ...
You know the rest. The ehci_idone part is relevant? On 8 February 2015 at 22:24, Martin Pieuchot <mpieuc...@nolizard.org> wrote: > On 08/02/15(Sun) 21:57, Edd Barrett wrote: > > Hey, > > > > I have been having issues with a userland program hard resetting my > machine. > > > > I *think* but cannot be sure it is the USB compact flash reader causing > the > > issue: > > Difficult to believe that's an hardware problem. > > > umass0 at uhub3 port 2 configuration 1 interface 0 "SCM Microsystems Inc. > > eUSB Multi-Slot Reader" rev 1.10/5.15 addr 4 > > umass0: using SCSI over Bulk-Only > > scsibus4 at umass0: 2 targets, initiator 0 > > > > I am using this to image a CF under fs-uae to insert into a real amiga. I > > have done this before in the past without issue. It basically involves > > pointing the emulator at /dev/rsd1c. > > > > About 1/5 times when I start fs-uae, I get a hard reset of my machine. > > > > I notice the following in dmesg log from the last boot where it crashed: > > And nothing before that? > > > uvm_fault(0xffffffff818dc840, 0xffff800000000421, 0, 1) -> e > > kernel: page fault trap, code=0 > > Stopped at usb_allocmem+0x175: cmpq %rbx,0(%rax) > > This correspond to a chunk of DMA memory in the freelist, looks like > you're losing a race against your HC and freeing this chunk too soon. > > > splassert: sleep_finish: want 12 have 14 > > splassert: assertwaitok: want 0 have 14 > > splassert: mi_switch: want 12 have 14 > > splassert: sched_chooseproc: want 12 have 14 > > panic: kernel diagnostic assertion "p->p_wchan == NULL" failed: file > > "../../../../kern/kern_sched.c", line 322 > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > panic: tsleep: not SONPROC > > ... > > > > I am not given a chance to interact with ddb. > > > > I believe the CF reader to work OK (but it is quite old, maybe it is > > dying?). > > > > I will try to source another CF reader to see if the problem goes away. > > > > Dmesg below. (Not sure what happened to em0) > > > > OpenBSD 5.7-beta (GENERIC.MP) #838: Sat Feb 7 09:15:03 MST 2015 > > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 16844521472 (16064MB) > > avail mem = 16392187904 (15632MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries) > > bios0: vendor LENOVO version "GCET92WW (2.52 )" date 02/25/2013 > > bios0: LENOVO 3437CTO > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT > > ASF! UEFI UEFI POAT SSDT SSDT UEFI DBG2 > > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > EHC1(S3) > > EHC2(S3) HDEF(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.54 MHz > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > > cpu1: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > > cpu2: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 1, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > > cpu3: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 1, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > > acpiec0 at acpi0 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (PEG_) > > acpiprt2 at acpi0: bus 2 (EXP1) > > acpiprt3 at acpi0: bus 3 (EXP2) > > acpiprt4 at acpi0: bus 4 (EXP3) > > acpicpu0 at acpi0: C2, C1, PSS > > acpicpu1 at acpi0: C2, C1, PSS > > acpicpu2 at acpi0: C2, C1, PSS > > acpicpu3 at acpi0: C2, C1, PSS > > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > > acpitz0 at acpi0: critical temperature is 103 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > acpibat0 at acpi0: BAT0 model "45N1177" serial 12140 type LION oem > "SANYO" > > acpibat1 at acpi0: BAT1 not present > > acpiac0 at acpi0: AC unit online > > acpithinkpad0 at acpi0 > > acpidock0 at acpi0: GDCK not docked (0) > > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, > > 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > > intagp at vga1 not configured > > inteldrm0 at vga1 > > drm0 at inteldrm0 > > drm: Memory usable by graphics device = 2048M > > inteldrm0: 1366x768 > > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msiem0: Hardware > > Initialization Failedem0: Unable to initialize the hardware > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > int 16 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > > pci1 at ppb0 bus 2 > > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int > 16 > > sdmmc0 at sdhc0 > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2200" rev 0xc4: > > msi, MIMO 2T2R, BGN, address 9c:4e:36:b8:f8:f8 > > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > > pci3 at ppb2 bus 4 > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 > int 23 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > > 1.3 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT240M50, MU02> SCSI3 > 0/direct > > fixed naa.500a0751093c44b5 > > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > > int 18 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > > uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft > > Microsoft\M-. 2.4GHz Transceiver v9.0" rev 2.00/7.67 addr 3 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub2 port 2 configuration 1 interface 1 "Microsoft > > Microsoft\M-. 2.4GHz Transceiver v9.0" rev 2.00/7.67 addr 3 > > uhidev1: iclass 3/1, 26 report ids > > uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1 > > uhid1 at uhidev1 reportid 23: input=0, output=0, feature=1 > > ums0 at uhidev1 reportid 26: 5 buttons, Z dir > > wsmouse1 at ums0 mux 0 > > uhidev2 at uhub2 port 2 configuration 1 interface 2 "Microsoft > > Microsoft\M-. 2.4GHz Transceiver v9.0" rev 2.00/7.67 addr 3 > > uhidev2: iclass 3/0, 39 report ids > > uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0 > > uhid3 at uhidev2 reportid 7: input=7, output=0, feature=0 > > uhid4 at uhidev2 reportid 32: input=0, output=0, feature=18 > > uhid5 at uhidev2 reportid 33: input=2, output=0, feature=0 > > uhid6 at uhidev2 reportid 34: input=0, output=0, feature=26 > > uhid7 at uhidev2 reportid 35: input=0, output=0, feature=26 > > uhid8 at uhidev2 reportid 36: input=0, output=0, feature=31 > > uhid9 at uhidev2 reportid 37: input=0, output=0, feature=31 > > uhid10 at uhidev2 reportid 38: input=0, output=0, feature=31 > > uhid11 at uhidev2 reportid 39: input=31, output=0, feature=0 > > ugen0 at uhub2 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 4 > > uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics > > Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 5 > > video0 at uvideo0 > > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > > uhub3: port 2, set config 0 at addr 3 failed > > uhub3: device problem, disabling port 2 > > uhidev3 at uhub3 port 5 configuration 1 interface 0 "Tablet ISD-V4" rev > > 1.10/6.11 addr 3 > > uhidev3: iclass 3/1, 2 report ids > > ums1 at uhidev3 reportid 1: 2 buttons > > wsmouse2 at ums1 mux 0 > > ums2 at uhidev3 reportid 2: 3 buttons, tip, barrel, eraser > > wsmouse3 at ums2 mux 0 > > vscsi0 at root > > scsibus2 at vscsi0: 256 targets > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on sd0a (a81068940d057f4c.a) swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > umass0 at uhub3 port 2 configuration 1 interface 0 "SCM Microsystems Inc. > > eUSB Multi-Slot Reader" rev 1.10/5.15 addr 4 > > umass0: using SCSI over Bulk-Only > > scsibus4 at umass0: 2 targets, initiator 0 > > sd1 at scsibus4 targ 1 lun 0: <eUSB, Compact Flash, 5.0F> SCSI2 0/direct > > removable > > sd1: 3847MB, 512 bytes/sector, 7880544 sectors > > sd2 at scsibus4 targ 1 lun 1: <eUSB, SD-MS-SM, 5.0F> SCSI2 0/direct > > removable > > > > -- > > Best Regards > > Edd Barrett > > > > http://www.theunixzoo.co.uk > -- Best Regards Edd Barrett http://www.theunixzoo.co.uk
