Upgrading to the latest snapshot, I noticed my upd sensors had been
disturbingly crippled.
uhidev0 at uhub4 port 1 configuration 1 interface 0 "EATON Eaton 3S" rev
2.00/1.00 addr 2
uhidev0: iclass 3/0, 32 report ids
upd0 at uhidev0
Diff below is what happens from upd.c r1.13 to r1.14.
-hw.sensors.upd0.indicator0=On (ACPresent), OK
-hw.sensors.upd0.indicator1=On (Charging), OK
-hw.sensors.upd0.indicator2=Off (Discharging), OK
-hw.sensors.upd0.indicator3=Off (ShutdownImminent), OK
-hw.sensors.upd0.percent0=100.00% (FullChargeCapacity), OK
-hw.sensors.upd0.percent1=100.00% (RemainingCapacity), OK
+hw.sensors.upd0.indicator0=Off (ShutdownImminent), OK
+hw.sensors.upd0.indicator1=On (ACPresent), OK
Is this an expected fallout? Can I provide more info to assist? Full
dmesg (latest snap + vanilla current kernel w/ upd.c r1.13) follows.
/Alexander
OpenBSD 5.7-current (GENERIC.MP) #2: Tue May 12 01:50:04 CEST 2015
[email protected]:/bigtmp/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1996029952 (1903MB)
avail mem = 1931755520 (1842MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries)
bios0: vendor HP version "O41" date 10/01/2013
bios0: HP ProLiant MicroServer
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4)
PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4) PE21(S4)
PE22(S4) PE23(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.67 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.36 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpi0: unable to load \\_SB_._INI.EXH1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus 2 (PCE4)
acpiprt4 at acpi0: bus 3 (PCE6)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: 2196 MHz: speeds: 2200 1900 1600 1300 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product 0x9602
rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
vendor "Marvell", unknown product 0x9192 (class mass storage subclass RAID, rev
0x13) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1
(0x5784100): msi, address 38:ea:a7:a9:e9:86
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19, AHCI
1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, EXT0> SCSI3 0/direct fixed
naa.50025388a01a9722
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD60EFRX-68M, 82.0> SCSI3 0/direct
fixed naa.50014ee2b613deca
sd1: 5723166MB, 512 bytes/sector, 11721045168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, Hitachi HDS72202, JKAO> SCSI3 0/direct
fixed naa.5000cca221dd6beb
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd3 at scsibus1 targ 3 lun 0: <ATA, WDC WD30EZRX-00D, 80.0> SCSI3 0/direct
fixed naa.50014ee6ae0f34aa
sd3: 2861588MB, 512 bytes/sector, 5860533168 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <Optiarc, DVD RW AD-7170S, 1.82> ATAPI 5/cdrom
removable
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub4 port 1 configuration 1 interface 0 "EATON Eaton 3S" rev
2.00/1.00 addr 2
uhidev0: iclass 3/0, 32 report ids
upd0 at uhidev0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (59bd90407031fb45.a) swap on sd0b dump on sd0b
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
