i missed a few things. On Mon, 18 May 2015 08:05:05 -0400 dan mclaughlin <[email protected]> wrote: > i sent this to bugs@ but it didn't seem to get posted. granted that it has > only been a few hours, but that is the second time in two days, so i am > taking a chance sending it here instead. > > this is related to the first report i sent, which others experienced too. > (https://marc.info/?l=openbsd-misc&m=143186792526486&w=2). > someone reported this first issue was fixed for him, but i am apparently > still experiencing something (i downloaded from the same source).
this is probably unrelated. > > >Synopsis: console/X go blank and will not display after switching > >Category: display > >Environment: > System : OpenBSD 5.7 > Details : OpenBSD 5.7-current (GENERIC) #843: Sun May 17 20:46:15 > MDT 2015 > > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > > Architecture: OpenBSD.i386 > Machine : i386 > >Description: > the console works until you switch to X, which works fine until you > switch back to console, then everything is blank. > input still seems to work right. > >How-To-Repeat: > switch to X, switch back to console i now suspect this problem is related to the vesa driver. the graphics don't work on this system (bug reports and attempts by jsg@ to fix it are in the archives), so i have been using vesa, and that was fine enough. now though... so, how-to-repeat it, switch to an X session *using the vesa driver*... > >Fix: > > dmesg: > OpenBSD 5.7-current (GENERIC) #843: Sun May 17 20:46:15 MDT 2015 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,CNXT-ID,xTPR,PERF > real mem = 527908864 (503MB) > avail mem = 507011072 (483MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 02/25/04, BIOS32 rev. 0 @ 0xfb940, SMBIOS rev. 2.3 @ > 0xf0000 (40 entries) > bios0: vendor Phoenix Technologies, LTD version "3.08" date 02/25/2004 > bios0: Compaq Presario 061 DW263A-ABA S7300CL NA510 > acpi at bios0 function 0x0 not configured > mpbios0 at bios0: Intel MP Specification 1.4 > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 100MHz > mpbios0: bus 0 is type PCI > mpbios0: bus 1 is type PCI > mpbios0: bus 2 is type ISA > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdbb4 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdae0/192 (10 entries) > pcibios0: PCI Exclusive IRQs: 3 5 9 10 11 > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xb400 0xcc000/0x8000! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe0000000, size 0x8000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is invalid, > remainder is 130 > Raw EDID: > > 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is invalid, > remainder is 130 > Raw EDID: > > 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is invalid, > remainder is 130 > Raw EDID: > > 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > error: [drm:pid0:drm_edid_block_valid] *ERROR* EDID checksum is invalid, > remainder is 130 > Raw EDID: > > 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > drm:pid0:drm_do_get_edid *WARNING* VGA-1: EDID block 0 invalid. > inteldrm0: 1024x768 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int 18 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82 > pci_intr_map: bus 0 dev 30 func 0 pin 1; line 5 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 30 func 0 pin 2; line 3 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 30 func 0 pin 3; line 9 > pci_intr_map: no MP mapping found > pci_intr_map: bus 0 dev 30 func 0 pin 4; line 11 > pci_intr_map: no MP mapping found > pci1 at ppb0 bus 1 > siop0 at pci1 dev 9 function 0 "Symbios Logic 53c810" rev 0x02: apic 2 int 21 > scsibus1 at siop0: 8 targets, initiator 7 > rl0 at pci1 dev 12 function 0 "Realtek 8139" rev 0x10: apic 2 int 23, address > 00:0c:76:e0:e9:bd > rlphy0 at rl0 phy 0: RTL internal PHY > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer > at 3579545Hz > pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: > wd0: 16-sector PIO, LBA48, > wd1 at pciide0 channel 0 drive 1: > wd1: 16-sector PIO, LBA48, > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > wd2 at pciide0 channel 1 drive 0: > wd2: 16-sector PIO, LBA48, > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus2 at atapiscsi0: 2 targets > cd0 at scsibus2 targ 0 lun 0: <HP, DVD Writer 630c, AH26> ATAPI 5/cdrom > removable > wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 > ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: apic 2 int > 17 > iic0 at ichiic0 > iic0: addr 0x2f 00=01 01=07 02=01 03=00 04=07 05=00 06=08 07=00 14=14 15=62 > 16=03 17=02 words 00=01ff 01=07ff 02=01ff 03=00ff 04=07ff 05=00ff 06=08ff > 07=00ff > spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 > auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: apic 2 int > 17, ICH4 AC97 > ac97: codec id 0x414c4780 (Avance Logic ALC658 rev 0) > ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo > audio0 at auich0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 2.88MB 80 cyl, 2 head, 36 sec > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot): using irq 1 > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot): using irq 12 > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x2e/2: W83627THF rev 0x83 > lm1 at wbsio0 port 0x290/8: W83627THF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > sd1 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed > sd1: 38161MB, 512 bytes/sector, 78154688 sectors > root on sd1a (03b5c22f07770c81.a) swap on sd1b dump on sd1b >
