Hello, attached is a diff to fix different typos in plus58.html.
"use-after-free" is sometimes written as "use after free", I didn't include those. I could add a diff to unify them if wanted. "an" before words not beginning with a vocal occurs quite frequent. Should I provide a diff to fix them too? Regards, Markus
Index: plus58.html =================================================================== RCS file: /cvs/www/plus58.html,v retrieving revision 1.3 diff -u -r1.3 plus58.html --- plus58.html 9 Aug 2015 00:39:22 -0000 1.3 +++ plus58.html 9 Aug 2015 16:47:27 -0000 @@ -87,10 +87,10 @@ </ul> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/sshd.8";>sshd(8)</a>, add getpid to sandbox (bz#2419). <li>Get jumbo frames working in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/oce.4";>oce(4)</a>. -<li>Allow to re-plug USB3 devices on the root hub withtout going through a suspend/resume cycle (or rebooting) with Intel ICH7 xHCI. +<li>Allow to re-plug USB3 devices on the root hub without going through a suspend/resume cycle (or rebooting) with Intel ICH7 xHCI. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ps.1";>ps(1)</a>, remove the calculation that includes the process lifetime and just use the p_pctcpu value as %cpu time. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/cwm.1";>cwm(1)</a>, show an empty "ssh to" menu if the known_hosts file is missing. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/syslogd.8";>syslogd(8)</a>, add the possiblity to store all syslog messages received from a specific host into a single log file. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/syslogd.8";>syslogd(8)</a>, add the possibility to store all syslog messages received from a specific host into a single log file. <li>Never cache a RTF_GATEWAY route as next hop for a gateway route. This prevents rtentry loops when rt→rt_gwroute points to rt leading to an infamous "rtentry leak" panic. <!-- 2015-06-28 --> <li>Enable <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/armv7/vexpress.4";>vexpress(4)</a> on armv7. @@ -152,7 +152,7 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/npppd.8";>npppd(8)</a>, properly handle zero-length 1701/udp and GRE packets. <!-- 2015-06-22 --> <li>In ssh, don't count successful partial authentication as failures in monitor. This may have caused the monitor to refuse multiple authentications that would otherwise have successfully completed. -<li>On amd64 and i386, make it possible to create write combing mappings through /dev/mem. +<li>On amd64 and i386, make it possible to create write combining mappings through /dev/mem. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/pf.4";>pf(4)</a>, increment rule counters only after successful state insertion. <li>In ssh, don't call setgroups if we have zero groups; there's no guarantee that it won't try to deref the pointer. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/httpd.8";>httpd(8)</a>, URL-encode $SERVER_NAME and $REMOTE_USER before using them in the Location header. @@ -282,7 +282,7 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/from.1";>from(1)</a>, treat a missing mail spool the same as a zero-length mail spool unless the -f option was specified. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/pf.4";>pf(4)</a>, avoid division by 0 and using a 0 upper bound for <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/arc4random_uniform.3";>arc4random_uniform(3)</a>. <li>Fix audio interrupts on U4 systems. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/arp.8";>arp(8)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/ndp.8";>ndp(8)</a>, dont 'assume that the sockaddr_dl will be in the gateway sa. This fixes a regression introduced with the support of multiple connected routes. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/arp.8";>arp(8)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/ndp.8";>ndp(8)</a>, dont assume that the sockaddr_dl will be in the gateway sa. This fixes a regression introduced with the support of multiple connected routes. <!-- 2015-06-02 --> <li>Rework the ppp handling in the tty layer so it has its own private pool to allocate packet memory out of. This fixes a long standing issue in ppp on a tty/serial line where it allocates mbufs at IPL_SOFTTTY, which is above the IPL_NET the mbuf layer protects itself at. <li>Fix a memory leak in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/sensorsd.8";>sensorsd(8)</a>. @@ -294,7 +294,7 @@ <li>Enable secureplt by default on alpha. <li>Allow <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/gcc.1";>gcc(1) to produce more precise relocation information on alpha. This will be necessary to enable secureplt by default. <li>Switch m88k ports to binutils 2.17. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/relayd.8";>relayd8</a>, fix a memory leak in an error path. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/relayd.8";>relayd(8)</a>, fix a memory leak in an error path. <!-- 2015-05-31 --> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/mandoc.1";>mandoc(1)</a>, implement the <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man7/roff.7";>roff(7)</a> "r" conditional. <!-- 2015-05-30 --> @@ -373,7 +373,7 @@ <li>Switch amd64, hppa, mips64, mips64le and powerpc to binutils 2.17. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ssh-keygen.1";>ssh-keygen(1)</a>, support -lF hostname to find search known_hosts and print key hashes. <li>Correctly state the link state to INVALID when creating a carp interface. -<li>Fix an unintialized variable in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/ix.4";>ix(4)</a>. +<li>Fix an uninitialized variable in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/ix.4";>ix(4)</a>. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man5/sshd_config.5";>sshd_config(5)</a>: <ul> <li>Support arguments to AuthorizedKeysCommand. @@ -383,7 +383,7 @@ <li>Remove <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/hotplug.4";>hotplug(4)</a> support from <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/ntpd.8";>ntpd(8)</a>. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/httpd.8";>httpd(8)</a>, correctly print the filesize in the Content-Length header for files larger than 2 GB on 32-bit architectures. <!-- 2015-05-19 --> -<li>FIx installing sets from CD-ROM if more than one CD-ROM drive is present. +<li>Fix installing sets from CD-ROM if more than one CD-ROM drive is present. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/chroot.8";>chroot(8)</a>, when a user is specified via the -u flag, use setusercontext() to setup (most of) the execution environment. <li>Add the -c flag to <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/id.1";>id(1)</a> to display the user's login class. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/icmp.4";>icmp(4)</a>, do not leak a rtentry if it is unusable. @@ -411,13 +411,13 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/nptd.8";>ntpd(8)</a>, if the constraint resolves to multiple IP addresses, try each of them one by one. <!-- 2015-05-16 --> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/axe.4";>axe(4)</a>, read ethernet address from EEPROM on AX88772B. -<li>Add a F_ISATTY option to fcntl(), so that isatty() can use this rather than than the bloated ioctl() interface. +<li>Add a F_ISATTY option to fcntl(), so that isatty() can use this rather than the bloated ioctl() interface. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/aucat.1";>aucat(1)</a>, prevent periodic glitches occurring under certain circumstances. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/audioctl.1";>audioctl(1)</a>, display simply "play" when play mode is set. <!-- 2015-05-15 --> <li>Make it possible to use the same network on multiple interfaces at the same time. <li>Give <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/carp.4";>carp(4)</a> interfaces their own low priority. -<li>Introduce if_output(), a function do to the last steps before enqueuing a packet on the sending queue of an interface. +<li>Introduce if_output(), a function to do the last steps before enqueuing a packet on the sending queue of an interface. <li>Remove the "Use DUIDs rather than device names in fstab?" question from the installer and use DUIDs unconditionally. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/smtpd.8";>smtpd(8)</a>, don't log credentials upon AUTH LOGIN authentication failures. <!-- 2015-05-14 --> @@ -426,7 +426,7 @@ <li>Use a salted hash of the lock passphrase instead of plain text and do constant-time comparisons of it. <li>Add a 0.1s incrementing delay for each failed unlock attempt up to 10s. </ul> -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/upd.4";>upd(4)</a>, make the "Battery Present" sensor a depency of all the battery-related sensors only if it is present. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/upd.4";>upd(4)</a>, make the "Battery Present" sensor a dependency of all the battery-related sensors only if it is present. <li>Update to font-util 1.3.1. <li>Extend <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/autoinstall.8";>autoinstall(8)</a> to allow for <em>hostname</em>-<em>mode</em>.conf response files and to put response files in a subdir of the webserver's document root. <!-- 2015-05-13 --> @@ -434,7 +434,7 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/smtpd.8";>smtpd(8)</a>, avoid multiple "From " and "Return-Path" headers. <!-- 2015-05-12 --> <li>Translate the fec parameters from the novena dtb to set a different clock skew to the same micrel phy used on sabre lite. This change resolves the stability problems with imxenet on novena. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, to replace c0-*, add a high watermark to the pty event, and also backoff when the any of the ttys the pane is going to write to has buffered enough data. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, to replace c0-*, add a high watermark to the pty event, and also backoff when any of the ttys the pane is going to write to has buffered enough data. <li>Revert r1.3 of src/gnu/usr.bin/binutils-2.17/bfd/elflink.c. It introduces bogus failures when inter-library dependencies are present. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/em.4";>em(4)</a>, make sure the rx ring lwm is set to at least 4. As far as we know, all hardware variants need at least 4 descriptors on the rx ring to be able to receive packets. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>: @@ -540,19 +540,19 @@ <li><font color="#e00000">5.6 and 5.7 SECURITY FIX: malformed binaries could trigger kernel panics or view kernel memory</font><br>A source code patch exists for <a href="errata56.html#023_elf">5.6</a> and <a href="errata57.html#006_elf">5.7</a>. <li><font color="#e00000">5.6 and 5.7 SECURITY FIX: multiple issues in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/cpio.1";>cpio(1)</a>/<a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/pax.1";>pax(1)</a>/<a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tar.1";>tar(1)</a>.</font><br>A source code patch exists for <a href="errata56.html#024_tar">5.6</a> and <a href="errata57.html#007_tar">5.7</a>. <li>Don't add a separate .got.plt section as it would result in a partially writable GOT. <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ld.so.1";>ld.so(1)</a> will properly write-protect the single .got. -<li>Prevent a user after free in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/tun.4";>tun(4)</a>. +<li>Prevent a use after free in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/tun.4";>tun(4)</a>. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/ix.4";>ix(4)</a>, set the correct media type for 1000baseLX SFPs. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/grep.1";>grep(1)</a>, warn when the user specifies -R but no files, like GNU grep. <li>Allow use of 1Gb 1000baseLX SFPs in 82599 <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/ix.4";>ix(4)</a> SFP+ port. <li>Optimise sensor I/O in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/upd.4";>upd(4)</a>. -<li>Indroduce fd_getfile_mode() and use it were fd_getfile() is directly followed by a mode check. +<li>Introduce fd_getfile_mode() and use it were fd_getfile() is directly followed by a mode check. <!-- 2015-04-29 --> <li>Fix two assertion failures in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/mandoc.1";>mandoc(1)</a>. <li>Add the tmux and tmux-256color entries to <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man5/termcap.5";>termcap(5)</a> and terminfo. This can be used inside tmux for correct italics support. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, if default-terminal is set to "screen" or "screen-*", follow historic screen(1) behaviour and send smso (standout) instead of sitm (italics) for SGR 3. <li>Fix a use after free and a NULL pointer access in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/mandoc.1";>mandoc(1)</a>. <li>Support passing a template file for the auto-allocation to <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/disklabel.8";>disklabel(8)</a>. -<li>Fix an fd leak in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/relayd.8";>relayd(8)</a>. +<li>Fix a fd leak in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/relayd.8";>relayd(8)</a>. <!-- 2015-04-28 --> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man5/sshd_config.5";>sshd_config(5)</a>, allow ListenAddress, Port and AddressFamily in any order (bz#68). <li>Avoid a NULL dereference in CBS_get_any_asn1_element(). @@ -573,10 +573,10 @@ <li>Use a <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/systrace.4";>systrace(4)</a> sandbox with a short whitelist of allowed syscalls for the file(1) child process. </ul> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/upd.4";>upd(4)</a>, parse the HID descriptor multiple times to find sensors. This avoid lookups in the hot path for sensors that depend on the value of others. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, if the requested pane is already active, do not unzoom the window (or doanything else). This prevents mouse clicking when zoomed causing unzoom. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, if the requested pane is already active, do not unzoom the window (or do anything else). This prevents mouse clicking when zoomed causing unzoom. <li>Correctly write the 64bits of the HID 1, 4 and 5 registers on powerpc. <!-- 2015-04-26 --> -<li>Allow "sshd -f none" to skip reading the config file, much like"ssh -F none" does. +<li>Allow "sshd -f none" to skip reading the config file, much like "ssh -F none" does. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/file.1";>file(1)</a>, don't support -s on FIFOs. <li>Let <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/bgpd.8";>bgpd(8)</a> check the length of the control socket path to make sure it fits -- just like <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/bgpctl.8";>bgpctl(8)</a> does. <li>Fix a typo in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/sndiod.8";>sndiod(8)</a>: the buffer size should be 7680 rather than 7860. @@ -603,7 +603,7 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/file.1";>file(1)</a>, fail if a \ appears at EOL of a <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man5/magic.5";>magic(5)</a> file rather than continuing off the end of the buffer. <li>In LibreSSL, don't ignore the reference count in X509_STORE_free. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, explicitly cancel mouse "button" mode. This happens implicitly with some of the other things we send with xterm, but not with urxvt. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/m4.1";>m4(1)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/make.1";>make(1)</a>, adda check for overflow while doubling. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/m4.1";>m4(1)</a> and <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/make.1";>make(1)</a>, add a check for overflow while doubling. <li>In LibreSSL, check for invalid leading zeros in CBS_get_asn1_uint64. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/bgpd.8";>bgpd(8)</a>, allow rules that match directly on the peer AS. Also adjust the IRR ruleset output to include the declared peer AS instead of hoping they listed their neighbor IP address. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/httpd.8";>httpd(8)</a>, prepend files or directories containing ":" with "./" in directory indexes as per RFC 3986. @@ -665,7 +665,7 @@ <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, add support for multiple key tables to commands to be bound to sequences of keys. <li>In the installer, fix asking for list of http servers via "?". This should fix scanning for wireless networks too. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/mandoc.1";>mandoc(1)</a>, avoid out-of-bounds read access. This sometimes prevented proper warnings about text nodes preceding the first section header. -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, make jump-to-backward/jump-to-forward repeatable withjump-reverse/jump-again. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1";>tmux(1)</a>, make jump-to-backward/jump-to-forward repeatable with jump-reverse/jump-again. <li>Remove a typo introduced in r1.185 of src/sys/net/route.c. Because of this typo, a local route was <em>always</em> created. <li>Do not treat loopback interfaces as p2p interfaces and create only one route to ::1. <li>Always call <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man9/rt_ifa_dellocal.9";>rt_ifa_dellocal(9)</a> when removing an IPv6 address. @@ -693,7 +693,7 @@ <li>Remove emulation of OSS audio ioctls from Linux emulation. <li>Implement binary code patching on i386. <!-- 2015-04-18 --> -<li>Enable th REG_READ ioctl. +<li>Enable the REG_READ ioctl. <li>Don't lock the file for "vi -R" or "view". <li>Work around what appear to be CPUID lies about the monitor-line size. This makes the mwait-based idle loop actually work. <li>Convert many atoi() calls to strtonum() in userland, adding range checks and failure handling along the way. @@ -830,7 +830,7 @@ <!-- 2015-03-31 --> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/httpd.8";>httpd(8)</a>, zero the tls cert/key length variables when inheriting a server configuration for multiple listen statements in a server block. Otherwise httpd(8) will crash when a listen statement with tls is followed by a listen statement without tls. <li>Prevent <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ssh.1";>ssh(1)</a> from warning about SSH1 keys present when compiled without SSH1 support. Also identify SSH1 keys when scanning, even when compiled without SSH1 support. -<li>Fix an fd leak in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ssh.1";>ssh(1)</a>. +<li>Fix a fd leak in <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/ssh.1";>ssh(1)</a>. <li>Let <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/sort.1";>sort(1)</a> ignore $TMPDIR if setuid or setgid. <li>Don't make the -m and -c options of <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/sort.1";>sort(1)</a> mutually exclusive. <li>Let the <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/vlan.4";>vlan(4)</a> mtu be limited by the parent's hard mtu, not the current mtu. This makes it possible to have networks on the "native" (untagged) vlan on an interface at 1500, while setting a child vlan interface's mtu to jumbos. @@ -965,7 +965,7 @@ <li>The RTL8411 is supported by <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/rtsx.4";>rtsx(4)</a>. <li>Rewrite the <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/sh.1";>sh(1)</a> manual page and confine it to document features supported by POSIX-compliant shells. <!-- 2015-03-13 --> -<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/ospfd.8";>ospfd(8)</a>, wen removing interfaces in the RDE, also remove all the RDE neighbors that are part of that interface. This prevents use-after-free situations. +<li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/ospfd.8";>ospfd(8)</a>, when removing interfaces in the RDE, also remove all the RDE neighbors that are part of that interface. This prevents use-after-free situations. <li>Make <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/wi.4";>wi(4)</a> on PCMCIA work on luna88k. <!-- 2015-03-12 --> <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/makewhatis.8";>makewhatis(8)</a>, fix hardlink detection on platforms having padding in struct inodev, typically 64-bit platforms. @@ -979,7 +979,7 @@ <li>Remove setgid kmem support from <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/systat.1";>systat(1)</a>. As a result, the netstat view of systat is slightly different. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-5.6/man8/ping.8";>ping(8)</a>, bump the size of the time types on the wire to 64 bit. <li>Remove <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-5.6/man1/tcopy.1";>tcopy(1)</a>. -<li>Remove setgid kmem support from <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/eeprom.8";>eeprom(8)</a>. As a result, groot privileges are generally needed to run this. +<li>Remove setgid kmem support from <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/eeprom.8";>eeprom(8)</a>. As a result, root privileges are generally needed to run this. <li>Remove setgid kmem support from <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/pstat.8";>pstat(8)</a>. As a result, root privileges are needed to use the -d and -v options. <li>In <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/man.1";>man(1)</a>, when interpreting the -O argument as a macro name fails, fall back to showing Nd rather than not showing anything. <li>The 3160 should work with <a href="http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man4/iwm.4";>iwm(4)</a>.
