On Sun, Sep 06, 2015 at 11:44:11AM +0200, Stefan Fritsch wrote: > the diff below is necessary to make suspend/resume work when x2apic is > enabled (i.e. on qemu/kvm/...). While I don't expect problems, it would be > nice if I could get some reports that this doesn't break suspend/resume on > real machines, especially older ones (like core 2 duo and older) and ones > with an amd cpu.
Suspend and resume works fine with my ThinkPad T430s as usual. Suspend OpenBSD in a fully emulated qemu running on OpenBSD works. After resume, typing in the shell of the virtualized machine works. But at disk access, all processes hang in biowait. It is the same behavior with and without your diff. dmesg of both machines included. bluhm OpenBSD 5.8-current (GENERIC.MP) #239: Mon Sep 7 12:58:12 CEST 2015 bluhm@t430s.bluhm.invalid:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 16845570048 (16065MB) avail mem = 16331128832 (15574MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF! UEFI UEFI MSDM SSDT SSDT UEFI DBG2 acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz, 2893.44 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 4 (EXP3) acpiprt5 at acpi0: bus 12 (EXP5) acpiprt6 at acpi0: bus -1 (EXP6) acpiprt7 at acpi0: bus -1 (EXP7) acpiprt8 at acpi0: bus -1 (EXP8) acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 acpitz0 at acpi0: critical temperature is 103 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "45N1143" serial 663 type LION oem "Panasonic" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 cpu0: Enhanced SpeedStep 2893 MHz: speeds: 2901, 2900, 2800, 2700, 2500, 2400, 2300, 2200, 2000, 1900, 1800, 1700, 1600, 1400, 1300, 1200 MHz pci0 at mainbus0 bus 0 0:28:4: bridge mem address conflict 0xe0000000/0x8000000 0:28:4: bridge mem address conflict 0xe8000000/0x10000000 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 intagp at vga1 not configured inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1600x900 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address 3c:97:0e:a7:09:b2 ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 3 iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi, MIMO 3T3R, MoW, address 3c:a9:f4:35:02:ec ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 4 sdhc0 at pci3 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 18 sdmmc0 at sdhc0 ppb3 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi pci4 at ppb3 bus 12 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s ahci0: port 1: 1.5Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> SCSI3 0/direct fixed naa.5002538500000000 sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ8C2, SB01> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2 umodem0: data interface 2, has CM over data, has break umodem0: status change notification available ucom0 at umodem0 umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev 2.00/0.00 addr 2 umodem1: data interface 4, has CM over data, has break umodem1: status change notification available ucom1 at umodem1 umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev 2.00/0.00 addr 2 umodem2: data interface 10, has CM over data, has break umodem2: status change notification available ucom2 at umodem2 ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3 uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (25943b55cd50dee5.a) swap on sd0b dump on sd0b OpenBSD 5.8-current (GENERIC) #1243: Sun Sep 6 22:47:12 CEST 2015 bluhm@t430s.bluhm.invalid:/crypt/home/bluhm/openbsd/cvs/src/sys/arch/amd64/compile/GENERIC real mem = 117309440 (111MB) avail mem = 109965312 (104MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0 acpi0 at bios0: rev 0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC HPET acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: QEMU Virtual CPU version 2.2.1, 2894.44 MHz cpu0: FPU,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,HV,NXE,LONG,LAHF,SVM,ABM,SSE4A cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 1000MHz ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins acpihpet0 at acpi0: 100000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!) pvbus0 at mainbus0: pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.2.> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9 iic0 at piixpm0 vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00: Virtio Network Device vio0 at virtio0: address 70:5f:ca:21:8d:70 virtio0: apic 0 int 11 virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Network" rev 0x00: Virtio Network Device vio1 at virtio1: address 70:5f:ca:21:8d:80 virtio1: apic 0 int 11 virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00: Virtio Block Device vioblk0 at virtio2 scsibus2 at vioblk0: 2 targets sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed sd0: 1024MB, 512 bytes/sector, 2097152 sectors virtio2: apic 0 int 10 isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 1: density unknown com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 nvram: invalid checksum vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (544e9c152f4c1d8f.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted clock: unknown CMOS layout