On Fri, Dec 11, 2015 at 10:09:20AM +0100, Martin Pieuchot wrote: > Without hardware acceleration my PowerBook G4 12'' with a NVIDIA > GeForce FX Go 5200 is unusable. Since XAA is no longer supported, > here's a simple EXA backend for nv(4) based on the XAA sources and > Nouveau. It only implements Solid and Copy but that already makes > a huge difference. > > To test it you need to regenerate configure scripts for xf86-video-nv > as described in /usr/xenocara/README. > > I can provide a diff for upstream it the driver is still maintained. > > I'd like to hear from people using NVidia cards. >
This is quite an impressive improvement, thanks a lot! Full screen video becomes watchable. However, trying to move an xterm with the mouse still isn't fun. vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8600M GT" rev 0xa1 OpenBSD 5.8-current (GENERIC.MP) #531: Sat Dec 12 02:15:38 CET 2015 t...@miraculix.home:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2110599168 (2012MB) avail mem = 2042568704 (1947MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (45 entries) bios0: vendor Apple Inc. version "MBP41.88Z.00C1.B03.0802271651" date 02/27/08 bios0: Apple Inc. MacBookPro4,1 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices ADP1(S3) LID0(S3) ARPT(S3) GIGE(S3) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) UHC5(S3) EHC1(S3) EHC2(S3) EC__(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.44 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEGP) acpiprt2 at acpi0: bus 3 (RP03) acpiprt3 at acpi0: bus 11 (RP05) acpiprt4 at acpi0: bus 12 (RP06) acpiprt5 at acpi0: bus 13 (PCIB) acpicpu0 at acpi0: !C3(100@57 mwait.3@0x31), !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpicpu1 at acpi0: !C3(100@57 mwait.3@0x31), !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "14127832176087873" type 14127832377542988 oem "14127833101004627" acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2400, 2200, 2000, 1800, 1600, 1400, 1200, 800 MHz memory map conflict 0xf00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xfffa0000/0x30000 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x03: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8600M GT" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x04: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x04: apic 1 int 16 ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x04: apic 1 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC885 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x04: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x04: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x04: msi pci4 at ppb3 bus 11 "Broadcom BCM4321" rev 0x05 at pci4 dev 0 function 0 not configured ppb4 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x04: msi pci5 at ppb4 bus 12 mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8058" rev 0x13, Yukon-2 EC Ultra rev. B0 (0x3): apic 1 int 17 msk0 at mskc0 port A: address 00:22:41:32:fe:f1 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x04: apic 1 int 16 uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x04: apic 1 int 18 uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x04: apic 1 int 21 ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x04: apic 1 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf4 pci6 at ppb5 bus 13 "TI TSB82AA2 FireWire" rev 0x02 at pci6 dev 3 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x04 pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 1 int 21 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRW GSA-S10N, AP12> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 18 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <HITACHI HTS725050A9A364> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x04: apic 1 int 20 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 asmc0 at isa0 port 0x300/32: rev 1.27f527, 261 keys uvideo0 at uhub1 port 4 configuration 1 interface 0 "Apple Inc. Built-in iSight" rev 2.00/1.60 addr 2 ugen0 at uhub1 port 4 configuration 1 "Apple Inc. Built-in iSight" rev 2.00/1.60 addr 2 uhub7 at uhub2 port 1 "Apple Inc. BRCM2046 Hub" rev 2.00/1.00 addr 2 ugen1 at uhub7 port 1 "Apple Inc. Bluetooth USB Host Controller" rev 2.00/1.80 addr 3 uhidev0 at uhub7 port 2 configuration 1 interface 0 "Apple Computer product 0x820a" rev 2.00/1.00 addr 4 uhidev0: iclass 3/1, 1 report id ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub7 port 3 configuration 1 interface 0 "Apple Computer product 0x820b" rev 2.00/1.00 addr 5 uhidev1: iclass 3/1, 2 report ids ums0 at uhidev1 reportid 2: 3 buttons wsmouse0 at ums0 mux 0 uhidev2 at uhub6 port 1 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/0.16 addr 2 uhidev2: iclass 3/0, 38 report ids uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 uhidev3 at uhub6 port 2 configuration 1 interface 0 "Apple, Inc. Apple Internal Keyboard / Trackpad" rev 2.00/0.70 addr 3 uhidev3: iclass 3/1, 9 report ids ukbd1 at uhidev3 reportid 1: 8 variable keys, 6 key codes, country code 13 wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhid3 at uhidev3 reportid 9: input=0, output=0, feature=3 uhidev4 at uhub6 port 2 configuration 1 interface 1 "Apple, Inc. Apple Internal Keyboard / Trackpad" rev 2.00/0.70 addr 3 uhidev4: iclass 3/0, 68 report ids uhid4 at uhidev4 reportid 68: input=511, output=0, feature=0 ubcmtp0 at uhub6 port 2 configuration 1 interface 2 "Apple, Inc. Apple Internal Keyboard / Trackpad" rev 2.00/0.70 addr 3 wsmouse1 at ubcmtp0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd0: 476936MB, 512 bytes/sector, 976766528 sectors root on sd0a (7966d4a5430aa607.a) swap on sd0b dump on sd0b video0 at uvideo0