Hi all, i have pf,carp,pfsync and dhcpd setup with 2 Dell R610. today i updated my secondary firewall with latest snapshot from http://ftp2.eu.openbsd.org/ install59.iso 26-Jan-2016 04:00
and after update secondary firewall panic http://kosjenka.srce.hr/~hrvoje/crash2.jpg i couldn't type anything in ddb console .. i disabled pfsync0 and syncdev bnx3 on primary firewall and then secondary boots up.. would this commit http://permalink.gmane.org/gmane.os.openbsd.cvs/152882 resolve this problem? pf.conf set limit states 200000 set skip on { lo bnx3 enc0 } table <srce> { XXX } match out on bnx0 from 10.111/16 nat-to XXX/29 port 1024:65535 block pass quick proto carp keep state (no-sync) pass in quick on bnx0 from <srce> pass out log on bnx0 pass in log on bnx1 from 10.111/16 pass inet proto icmp icmp-type { echoreq, unreach code needfrag } dmesg OpenBSD 5.9-beta (GENERIC.MP) #1864: Mon Jan 25 19:11:29 MST 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 12854988800 (12259MB) avail mem = 12461199360 (11883MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (84 entries) bios0: vendor Dell Inc. version "6.4.0" date 07/23/2013 bios0: Dell Inc. PowerEdge R610 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST BERT EINJ SRAT TCPA acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 32 (boot processor) cpu0: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.41 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 1 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu1 at mainbus0: apid 0 (application processor) cpu1: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 0, package 0 cpu2 at mainbus0: apid 34 (application processor) cpu2: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 1 cpu3 at mainbus0: apid 2 (application processor) cpu3: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 0, core 1, package 0 cpu4 at mainbus0: apid 50 (application processor) cpu4: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu4: 256KB 64b/line 8-way L2 cache cpu4: smt 0, core 9, package 1 cpu5 at mainbus0: apid 18 (application processor) cpu5: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu5: 256KB 64b/line 8-way L2 cache cpu5: smt 0, core 9, package 0 cpu6 at mainbus0: apid 52 (application processor) cpu6: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu6: 256KB 64b/line 8-way L2 cache cpu6: smt 0, core 10, package 1 cpu7 at mainbus0: apid 20 (application processor) cpu7: Intel(R) Xeon(R) CPU E5630 @ 2.53GHz, 2660.00 MHz cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT cpu7: 256KB 64b/line 8-way L2 cache cpu7: smt 0, core 10, package 0 ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (PEX3) acpiprt3 at acpi0: bus -1 (PEX4) acpiprt4 at acpi0: bus -1 (PEX5) acpiprt5 at acpi0: bus -1 (PEX6) acpiprt6 at acpi0: bus 4 (PEX7) acpiprt7 at acpi0: bus 5 (PEX9) acpiprt8 at acpi0: bus -1 (PEXA) acpiprt9 at acpi0: bus 3 (SBEX) acpiprt10 at acpi0: bus 6 (COMP) acpicpu0 at acpi0: C1(@1 halt!) acpicpu1 at acpi0: C1(@1 halt!) acpicpu2 at acpi0: C1(@1 halt!) acpicpu3 at acpi0: C1(@1 halt!) acpicpu4 at acpi0: C1(@1 halt!) acpicpu5 at acpi0: C1(@1 halt!) acpicpu6 at acpi0: C1(@1 halt!) acpicpu7 at acpi0: C1(@1 halt!) ipmi at mainbus0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 pci1 at ppb0 bus 1 bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4 bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16 ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 pci2 at ppb1 bus 2 bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0 bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10 ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi pci3 at ppb2 bus 4 ppb3 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi pci4 at ppb3 bus 5 "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02 pci5 at ppb4 bus 3 mfi0 at pci5 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 0 int 16 mfi0: "PERC 6/i Integrated", firmware 6.3.3.0002, 256MB cache scsibus1 at mfi0: 64 targets sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct fixed naa.6a4badb0331002001357370807b4917a sd0: 139392MB, 512 bytes/sector, 285474816 sectors uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21 uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci6 at ppb5 bus 6 vga1 at pci6 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 0 int 23 for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TEAC, DVD-ROM DV-28SW, R.2A> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr 2 uhidev0 at uhub4 port 2 configuration 1 interface 0 "Avocent USB Composite Device-0" rev 1.10/0.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub4 port 2 configuration 1 interface 1 "Avocent USB Composite Device-0" rev 1.10/0.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (bd0f9f53c67ec5d2.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted bnx0: address 00:22:19:6b:e0:8c brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 bnx1: address 00:22:19:6b:e0:8e brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 bnx2: address 00:22:19:6b:e0:90 brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 bnx3: address 00:22:19:6b:e0:92 brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
