> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of YASUOKA Masahiko
> Sent: onsdag 13. april 2016 09.58
> To: [email protected]
> Cc: [email protected]
> Subject: Re: EFIboot and HP Stream 13
>
> On Wed, 13 Apr 2016 09:26:23 +0200
> "Vegar Linge Haaland" <[email protected]> wrote:
> > probing: pc0 mem[444K 88K 511M 1374M 19M]
> > Disk:BlockSize=256 LastBlock=16383
> > Hit any key to reboot
>
> The result above means the disk is 4MB and its bllock size 256 bytes.
> This seems strange for me.
>
Yes, it is strange. IIRC, this did not happen during legacy boot. I will try
to confirm this too.
> > Also, I forgot to mention this in my first post, sorry, not sure if it
> > is relevant though:
> > I am testing this using a USB-stick with everything on a encrypted
softraid.
>
> Did you try an USB stick without softraid? If the issue doesn't happen
> without softraid, can you show me the result of "machine diskinfo"
> command on boot prompt?
>
> --yasuoka
I will try this later today and revert.
In the meantime, this is the current machine diskinfo (using usb with
softraid) output and dmesg below.
--
(Wiriting this off the screen)
Disk BlkSiz IoAlign Size Flags Checksum
hd0 512 0 14GB 0x4 0xef39964e Removable
hd1 512 1 29GB 0x0 0xc03b08e9
hd2 512 1 4MB 0x0 0x783601b2
hd3 512 1 4MB 0x0 0x787e01b3
hd4 256 1 4MB 0x1 0x0
--
Dmesg:
OpenBSD 5.9-current (GENERIC.MP) #0: Tue Apr 12 09:21:52 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1981546496 (1889MB)
avail mem = 1917317120 (1828MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x763e3000 (53 entries)
bios0: vendor Insyde version "F.19" date 11/16/2015
bios0: HP HP Stream Notebook PC 13
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP UEFI MSDM TCPA UEFI SSDT MCFG SSDT SSDT SSDT SSDT
SSDT APIC SSDT TPM2 CSRT FPDT BGRT
acpi0: wakeup devices XHC1(S3) BRCM(S0) BRC1(S0) HDEF(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) RLAN(S5) PXSX(S4) RP04(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1760.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,V
MX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRA
ND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 79MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz, 1599.94 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,V
MX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,RDRA
ND,NXE,LONG,LAHF,3DNOWP,PERF,ITSC,SMEP,ERMS,SENSOR,ARAT
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 2, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 115 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP04)
acpiec0 at acpi0### AML PARSE ERROR (0x29b6): Undefined name:
\\_PR_.CPU0._PPC
error evaluating: \\_SB_.PCI0.LPCB.EC0_._REG
acpiec _REG failed, broken BIOS
acpicpu0 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0
C2: state 6: substate 8 >= num 3
C3: state 7: substate 4 >= num 3: C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: ID3C, resource for ISP3
acpipwrres1 at acpi0: USBC, resource for XHC1
acpitz0 at acpi0: critical temperature is 91 degC
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem
"Hewlett-Packard"
"PNP0C09" at acpi0 not configured
"HPQ8001" at acpi0 not configured
"*SYN320D" at acpi0 not configured
"HPQ6001" at acpi0 not configured
sdhc0 at acpi0: SDHA addr 0x91433000/0x1000 irq 45
sdmmc0 at sdhc0
"INT33FF" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"MSFT0101" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1760 MHz: speeds: 1601, 1600, 1520, 1440, 1360,
1280, 1200, 1120, 1040, 960, 880, 800, 720, 640, 560, 480 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Braswell Host" rev 0x21
"Intel HD Graphics" rev 0x21 at pci0 dev 2 function 0 not configured
vendor "Intel", unknown product 0x22dc (class DASP subclass miscellaneous,
rev 0x21) at pci0 dev 11 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel Braswell xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel Baswell TXE" rev 0x21 at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Braswell HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC282, Intel/0x2883, using Realtek ALC282
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel Braswell PCIE" rev 0x21: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc1 at rtsx0
ppb1 at pci0 dev 28 function 3 "Intel Braswell PCIE" rev 0x21: msi
pci2 at ppb1 bus 2
"Realtek 8191SE" rev 0x00 at pci2 dev 0 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel Braswell PCU LPC" rev 0x21
ichiic0 at pci0 dev 31 function 3 "Intel Braswell SMBus" rev 0x21: apic 1
int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
efifb0 at mainbus0
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
scsibus1 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 29820MB, 512 bytes/sector, 61071360 sectors
uvideo0 at uhub0 port 3 configuration 1 interface 0 "Sonix Technology Co.,
Ltd. HP Truevision HD" rev 2.00/1.03 addr 2
video0 at uvideo0
uhub1 at uhub0 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/88.31 addr 3
urtw0 at uhub1 port 2 configuration 1 interface 0 "Realtek RTL8187" rev
2.00/1.00 addr 4
urtw0: RTL8187 rev 0x04, RFv2, address 00:c0:ca:1b:37:d7
ugen0 at uhub1 port 3 "Realtek Bluetooth Radio" rev 2.10/2.00 addr 5
umass0 at uhub0 port 8 configuration 1 interface 0 "SanDisk Ultra" rev
3.00/1.00 addr 6
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Ultra, 1.00> SCSI4 0/direct
removable serial.07815590470530106392
sd1: 14832MB, 512 bytes/sector, 30375936 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd2: 13803MB, 512 bytes/sector, 28270308 sectors
softraid0: volume sd2 is roaming, it used to be sd1, updating metadata
softraid0: roaming device sd0d -> sd1d
root on sd2a (b2ea3cc31b0ea9c9.a) swap on sd2b dump on sd2b
