Hi, For a long time I was running an amd64 snapshot from 2016/03/30, then I installed a snapshot from 2016/10/09 on four machines (two laptops, a desktop and a 1U supermicro).
One apparent difference was that the load average on all four machines idled at slightly above 1 (1.12, 1.18, ...), about 1 more than previous snapshots (up and including March 30th). Initially I assumed maybe something in the snapshot(s), which would eventually go away with future updates. I built a couple of kernels from source since 2016/10/09 snapshot and each still runs at load avg of 1 more than expected when the box is completely idle. I briefly looked at cvs history (cvs log -d '2016/03/30<') and failed to see any obvious change that would attribute to this apparent display/reporting "glitch?" Can someone enlighten me on this issue? Thanks in advance, --patrick Index: kern_pledge.c =================================================================== RCS file: /cvs/obsd/src/sys/kern/kern_pledge.c,v retrieving revision 1.187 diff -u -p -u -p -r1.187 kern_pledge.c --- kern_pledge.c 27 Oct 2016 10:48:25 -0000 1.187 +++ kern_pledge.c 11 Nov 2016 20:56:21 -0000 @@ -1046,7 +1046,7 @@ pledge_sysctl(struct proc *p, int miblen if (miblen == 2 && /* hw.ncpu */ mib[0] == CTL_HW && mib[1] == HW_NCPU) return (0); - if (miblen == 2 && /* kern.loadavg / getloadavg(3) */ + if (miblen == 2 && /* vm.loadavg / getloadavg(3) */ mib[0] == CTL_VM && mib[1] == VM_LOADAVG) return (0); OpenBSD 6.0-current (GENERIC.MP) #2553: Sun Oct 9 20:50:35 MDT 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4277665792 (4079MB) avail mem = 4143493120 (3951MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f000 (19 entries) bios0: vendor American Megatrends Inc. version "1.1a" date 12/17/10 bios0: Supermicro X7SPA-HF acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC MCFG OEMB HPET EINJ BERT ERST HEST acpi0: wakeup devices P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4) EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.23 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu0: 512KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu1: 512KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu2: 512KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu3: 512KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P0P1) acpiprt2 at acpi0: bus 1 (P0P4) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus 2 (P0P8) acpiprt7 at acpi0: bus 3 (P0P9) acpicpu0 at acpi0: C1(@1 halt!) acpicpu1 at acpi0: C1(@1 halt!) acpicpu2 at acpi0: C1(@1 halt!) acpicpu3 at acpi0: C1(@1 halt!) "PNP0501" at acpi0 not configured "PNP0501" at acpi0 not configured acpibtn0 at acpi0: PWRB ipmi at mainbus0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:1b:21:c6:d0:30 ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi pci2 at ppb1 bus 2 em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:42 ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi pci3 at ppb2 bus 3 em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:43 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci4 at ppb3 bus 4 vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD10EVDS-63U8B1> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18 iic0 at ichiic0 lm1 at iic0 addr 0x2d: W83627DHG spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 4 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25 lm2 at wbsio0 port 0xca0/8: W83627DHG lm1: disabling sensors due to alias with lm2 vmm at mainbus0 not configured uhidev0 at uhub5 port 1 configuration 1 interface 0 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 1 configuration 1 interface 1 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (87724926ad929f3f.a) swap on wd0b dump on wd0b syncing disks... done r OpenBSD 6.0-current (GENERIC.MP) #0: Thu Nov 10 16:44:45 PST 2016 sidster@banshee.local:/sys/arch/amd64/compile/GENERIC.MP real mem = 4277665792 (4079MB) avail mem = 4143460352 (3951MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f000 (19 entries) bios0: vendor American Megatrends Inc. version "1.1a" date 12/17/10 bios0: Supermicro X7SPA-HF acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC MCFG OEMB HPET EINJ BERT ERST HEST acpi0: wakeup devices P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4) EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.21 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu0: 512KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=64, max=64, C-substates=0.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu1: 512KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu2: 512KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.00 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu3: 512KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P0P1) acpiprt2 at acpi0: bus 1 (P0P4) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus 2 (P0P8) acpiprt7 at acpi0: bus 3 (P0P9) acpicpu0 at acpi0: C1(@1 halt!) acpicpu1 at acpi0: C1(@1 halt!) acpicpu2 at acpi0: C1(@1 halt!) acpicpu3 at acpi0: C1(@1 halt!) "PNP0501" at acpi0 not configured "PNP0501" at acpi0 not configured acpibtn0 at acpi0: PWRB ipmi at mainbus0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:1b:21:c6:d0:30 ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi pci2 at ppb1 bus 2 em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:42 ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi pci3 at ppb2 bus 3 em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:43 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci4 at ppb3 bus 4 vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD10EVDS-63U8B1> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18 iic0 at ichiic0 lm1 at iic0 addr 0x2d: W83627DHG spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 4 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25 lm2 at wbsio0 port 0xca0/8: W83627DHG lm1: disabling sensors due to alias with lm2 vmm disabled by firmware vmm at mainbus0 not configured uhidev0 at uhub5 port 1 configuration 1 interface 0 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 1 configuration 1 interface 1 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (87724926ad929f3f.a) swap on wd0b dump on wd0b syncing disks... done r OpenBSD 6.0-current (GENERIC.MP) #0: Thu Nov 10 16:44:45 PST 2016 sidster@banshee.local:/sys/arch/amd64/compile/GENERIC.MP real mem = 4277665792 (4079MB) avail mem = 4143460352 (3951MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f000 (19 entries) bios0: vendor American Megatrends Inc. version "1.1a" date 12/17/10 bios0: Supermicro X7SPA-HF acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP APIC MCFG OEMB HPET EINJ BERT ERST HEST acpi0: wakeup devices P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4) EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.27 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu0: 512KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 200MHz cpu0: mwait min=64, max=64, C-substates=0.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.01 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu1: 512KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.01 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu2: 512KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.01 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR cpu3: 512KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P0P1) acpiprt2 at acpi0: bus 1 (P0P4) acpiprt3 at acpi0: bus -1 (P0P5) acpiprt4 at acpi0: bus -1 (P0P6) acpiprt5 at acpi0: bus -1 (P0P7) acpiprt6 at acpi0: bus 2 (P0P8) acpiprt7 at acpi0: bus 3 (P0P9) acpicpu0 at acpi0: C1(@1 halt!) acpicpu1 at acpi0: C1(@1 halt!) acpicpu2 at acpi0: C1(@1 halt!) acpicpu3 at acpi0: C1(@1 halt!) "PNP0501" at acpi0 not configured "PNP0501" at acpi0 not configured acpibtn0 at acpi0: PWRB ipmi at mainbus0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi pci1 at ppb0 bus 1 em0 at pci1 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:1b:21:c6:d0:30 ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi pci2 at ppb1 bus 2 em1 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:42 ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi pci3 at ppb2 bus 3 em2 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address 00:25:90:61:b5:43 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci4 at ppb3 bus 4 vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 19 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD10EVDS-63U8B1> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 int 18 iic0 at ichiic0 lm1 at iic0 addr 0x2d: W83627DHG spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 4 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25 lm2 at wbsio0 port 0xca0/8: W83627DHG lm1: disabling sensors due to alias with lm2 vmm disabled by firmware vmm at mainbus0 not configured uhidev0 at uhub5 port 1 configuration 1 interface 0 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 1 configuration 1 interface 1 "Rextron, Inc. USB K/M for SUN" rev 1.10/1.01 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (87724926ad929f3f.a) swap on wd0b dump on wd0b