This was caused by an overly large /etc/hosts file being copied under /tmp where it consumed remaining disk space.
On Sat, Feb 25, 2017 at 9:24 PM, Ted Roby <ted.r...@gmail.com> wrote: > Hello. > > When booting from bsd.rd and running upgrade, the rd filesystem will fill > up after the root > slice is checked and mounted. This happens after network acquisition and > causes an > endless loop due to invalid input when prompted for fsck of remaining > slices. > > I have experienced this with multiple snapshots since early December. > > Screenshots are jpeg, under 300k and around 800x600 resolution. > dmesg is from bsd.rd kernel used for screenshots. > > > https://theu82edee5thale.s3.amazonaws.com/20170224_225625.jpg > https://theu82edee5thale.s3.amazonaws.com/20170224_230317.jpg > https://theu82edee5thale.s3.amazonaws.com/20170224_225005.jpg > > > > OpenBSD 6.0-current (RAMDISK_CD) #187: Fri Feb 24 10:19:34 MST 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 4166717440 (3973MB) > avail mem = 4036685824 (3849MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (62 entries) > bios0: vendor LENOVO version "6DET38WW (2.02 )" date 12/19/2008 > bios0: LENOVO 74542GU > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA > DMAR SSDT SSDT SSDT > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.38 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16, > xTPR,PDCM,SSE4.1,LONG,LAHF,PERF,SENSOR > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: apic clock running at 266MHz > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus -1 (EXP2) > acpiprt5 at acpi0: bus 5 (EXP3) > acpicpu at acpi0 not configured > acpipwrres at acpi0 not configured > acpitz at acpi0 not configured > acpitz at acpi0 not configured > "PNP0C0D" at acpi0 not configured > "PNP0C0E" at acpi0 not configured > "PNP0303" at acpi0 not configured > "IBM3780" at acpi0 not configured > "PNP0C0A" at acpi0 not configured > "ACPI0003" at acpi0 not configured > "IBM0068" at acpi0 not configured > "PNP0C14" at acpi0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, > address 00:1f:16:0c:e4:a4 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO > 1T2R, MoW, address 00:21:6b:9f:29:c8 > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi > pci3 at ppb2 bus 5 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci4 at ppb3 bus 13 > "Intel 82801IEM LPC" rev 0x03 at pci0 dev 31 function 0 not configured > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > ahci0: port 0: 3.0Gb/s > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, SanDisk SDSSDA24, Z220> SCSI3 0/direct > fixed naa.5001b44ee39f3541 > sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin > "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > isa0 at mainbus0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay1 > softraid0 at root > scsibus1 at softraid0: 256 targets > sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct > fixed > sd1: 163842MB, 512 bytes/sector, 335549063 sectors > root on rd0a swap on rd0b dump on rd0b > uid 0 on /: file system full > uid 0 on /: file system full > uid 0 on /: file system full > >
