On Tue, Apr 04, 2017 at 15:32 +0200, Klemens Nanni wrote: > Hey, > > blocknonip's description is a tad clearer that way, the rest is mostly > cosmetical but still.
> Index: sbin/ifconfig/ifconfig.8 > =================================================================== > RCS file: /cvs/src/sbin/ifconfig/ifconfig.8,v > retrieving revision 1.280 > diff -u -p -r1.280 ifconfig.8 > --- sbin/ifconfig/ifconfig.8 20 Mar 2017 14:06:26 -0000 1.280 > +++ sbin/ifconfig/ifconfig.8 4 Apr 2017 09:33:37 -0000 > @@ -400,7 +400,7 @@ output from > .Cm hwfeatures > shows the maximum supported MTU. > .It Cm netmask Ar mask > -(inet and inet6) > +(inet and inet6 only) > Specify how much of the address to reserve for subdividing > networks into subnetworks. > The mask includes the network part of the local address > @@ -508,7 +508,7 @@ Disable automatic point-to-point link de > .It Cm blocknonip Ar interface > Mark > .Ar interface > -so that no non-IPv4, IPv6, ARP, or Reverse > +so that only IPv4, IPv6, ARP, and Reverse > ARP packets are accepted from it or forwarded to it from other > bridge member interfaces. > .It Cm -blocknonip Ar interface > @@ -824,7 +824,7 @@ The formula is > + > .Pf ( Cm advskew > / 256). > -If the master does not advertise within three times this interval, this host > +If the master does not advertise this interval within three times, this host > will begin advertising as master. > .Sh IEEE 802.11 (WIRELESS DEVICES) > .nr nS 1 > @@ -1520,7 +1520,7 @@ Remove the trunk port > Set the trunk protocol. > Refer to > .Xr trunk 4 > -for a complete list of the available protocols, > +for a complete list of the available protocols. > .El > .Sh TUNNEL > .nr nS 1 I agree that this reads better. OK mikeb
