On Wed, Jun 07, 2017 at 07:17:16PM +1000, David Gwynne wrote: > > tweaked diff >
yes, looks good. jmc > Index: ifconfig.8 > =================================================================== > RCS file: /cvs/src/sbin/ifconfig/ifconfig.8,v > retrieving revision 1.282 > diff -u -p -r1.282 ifconfig.8 > --- ifconfig.8 12 May 2017 15:11:02 -0000 1.282 > +++ ifconfig.8 7 Jun 2017 09:16:11 -0000 > @@ -1666,46 +1666,48 @@ device will try to establish a data conn > .Bk -words > .Nm ifconfig > .Ar vlan-interface > -.Op Cm vlan Ar vlan-tag > -.Op Oo Fl Oc Ns Cm vlandev Ar parent-interface > +.Oo Fl Oc Ns Cm parent Ar parent-interface > +.Oo Fl Oc Ns Cm vnetid Ar vlan-tag > .Ek > .nr nS 0 > .Pp > -The following options are available for a > +The following options are available for > .Xr vlan 4 > -interface: > +and > +.Xr svlan 4 > +VLAN interfaces: > .Bl -tag -width Ds > -.It Cm vlan Ar vlan-tag > -Set the vlan tag value > -to > -.Ar vlan-tag . > -This value is a 12-bit number which is used to create an 802.1Q > -vlan header for packets sent from the vlan interface. > -This value cannot be changed once it is set for an interface. > -.It Cm vlandev Ar parent-interface > -Associate with interface > +.It Cm parent Ar parent-interface > +Associate the VLAN interface with the interface > .Ar parent-interface . > -Packets transmitted through the vlan interface will be > -diverted to the specified interface > -.Ar parent-interface > -with 802.1Q vlan tagging. > -Packets with 802.1Q tagging received > -by the parent interface with the correct vlan tag will be diverted to > -the associated vlan pseudo-device. > -The vlan interface is assigned a > -copy of the parent interface's flags and the parent's Ethernet address. > -If > -.Cm vlandev > -and > -.Cm vlan > -are not set at the same time, the vlan tag will be inferred from > -the interface name, for instance > -.Cm vlan5 > -will be assigned 802.1Q tag 5. > -.It Cm -vlandev > +Packets transmitted on > +.Xr vlan 4 > +or > +.Xr svlan 4 > +interfaces will be tagged with 802.1Q or 802.1AD headers respectively > +and transmitted on the specified parent interface. > +Packets with 802.1Q or 802.1AD tags received > +by the parent interface with the specified VLAN tag will be diverted to > +the associated VLAN interface. > +Unless a custom Ethernet address is assigned to the VLAN interface, > +it will inherit a copy of the parent interface's Ethernet address. > +.It Cm -parent > Disassociate from the parent interface. > -This breaks the link between the vlan interface and its parent, > -clears its vlan tag, flags, and link address, and shuts the interface down. > +This breaks the link between the VLAN interface and its parent. > +.It Cm vnetid Ar vlan-tag > +Set the VLAN tag value to > +.Ar vlan-tag . > +This value is a 12-bit number which is used in the 802.1Q or 802.1AD > +headers in packets handled by > +.Xr vlan 4 > +or > +.Xr svlan 4 > +interfaces respectively. > +Valid tag values are from 1 to 4095 inclusive. > +.It Cm -vnetid > +Clear the tag value. > +Packets on a VLAN interface without a tag set will use a value of > +0 in their headers. > .El > .Sh EXAMPLES > Assign the >