On Sun, Aug 13, 2017 at 01:31:45PM +0100, Mark Cave-Ayland wrote: > Hi all, > > Does anyone have any real Sun hardware containing a PCI hme card running > OpenBSD, and if so does it work with the current 6.1 release? >
Hello Mark, I have a Sun Ultra 5 with the following dmesg: console is /pci@1f,0/pci@1,1/ebus@1/se@14,400000:a Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.1-current (GENERIC) #225: Fri Aug 11 19:58:43 MDT 2017 dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 536870912 (512MB) avail mem = 512393216 (488MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 1.3) @ 269.802 MHz cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 psycho0: bus range 0-2, PCI bus 0 psycho0: dvma map c0000000-dfffffff pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x11 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power0 at ebus0 addr 724000-724003 ivec 0x25 "SUNW,pll" at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2 sabtty0 at sab0 port 0: console sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: no keyboard comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a wsmouse0 at comms0 mux 0 lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ivec 0x22: polled "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec 0x27 not configured clock1 at ebus0 addr 0-1fff: mk48t59 "flashprom" at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 08:00:20:19:39:20 nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 machfb0 at pci1 dev 2 function 0 "ATI Mach64" rev 0x9a machfb0: ATY,GT-B, 1152x900 wsdisplay0 at machfb0 mux 1 wsdisplay0: screen 0 added (std, sun emulation) pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7e0 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-0> wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW SOHW-1693S, KS0A> ATAPI 5/cdrom removable wd1 at pciide0 channel 1 drive 1: <FUJITSU MPG3204AT E> wd1: 16-sector PIO, LBA, 19546MB, 40031712 sectors cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 wd1(pciide0:1:1): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x11 pci2 at ppb1 bus 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /pci@1f,0/pci@1,1/ide@3,0/disk@0,0 root on wd0a (f52f0bbc65e53556.a) swap on wd0b dump on wd0b It has a PCI hme card and it works great. I would be happy to help if you want to test some diff or program, but I am not knowledgeable enough to comment on the inner workings of the hme driver. -- Kaashif Hymabaccus GPG: 3E810B04